LA
L. Angeloni
info
Please Note
<p>This page displays the records of the person named above and is not linked to a unique person identifier. This record may need to be merged to a profile.</p>
2 records found
1
Multiscale 3D printed polymer probes for single cell experiments
A rapid prototyping method to fabricate microfluidic atomic force microscopy cantilevers for single cell studies
Master thesis
(2021)
-
P.F.J. van Altena, M.K. Ghatkesar, L. Angeloni, E.L. Fratila-Apachitei, T. Manzaneque Garcia
Facioscapulohumeral muscle dystrophy (FSHD) is the third most common muscle disease in the world. No cure has been found for FSHD, and current treatments focus on alleviating the symptoms. The disease is caused by a genetic error in 1/1000 - 1/200 of the nuclei in a multinucleated skeletal muscle cell. Studying that specific nucleus, by removing it from the cell, perform transcriptomics on it and determining the cell viability after the nucleus removal, can provide important information about FSHD.
In this work, a multiscale 3D printing approach was optimized to fabricate a microfluidic atomic force microscopy (AFM) cantilever that can remove a nucleus from a living cell. With the device mounted on an AFM system, cell experiments were performed, which showed that the nucleus can be removed from a cell using 3D printed microfluidic cantilevers. The printing methods can be used to fabricate various types of suspended microfluidic devices to perform single-cell biopsy and biophysical characterization of single-cells. ...
In this work, a multiscale 3D printing approach was optimized to fabricate a microfluidic atomic force microscopy (AFM) cantilever that can remove a nucleus from a living cell. With the device mounted on an AFM system, cell experiments were performed, which showed that the nucleus can be removed from a cell using 3D printed microfluidic cantilevers. The printing methods can be used to fabricate various types of suspended microfluidic devices to perform single-cell biopsy and biophysical characterization of single-cells. ...
Facioscapulohumeral muscle dystrophy (FSHD) is the third most common muscle disease in the world. No cure has been found for FSHD, and current treatments focus on alleviating the symptoms. The disease is caused by a genetic error in 1/1000 - 1/200 of the nuclei in a multinucleated skeletal muscle cell. Studying that specific nucleus, by removing it from the cell, perform transcriptomics on it and determining the cell viability after the nucleus removal, can provide important information about FSHD.
In this work, a multiscale 3D printing approach was optimized to fabricate a microfluidic atomic force microscopy (AFM) cantilever that can remove a nucleus from a living cell. With the device mounted on an AFM system, cell experiments were performed, which showed that the nucleus can be removed from a cell using 3D printed microfluidic cantilevers. The printing methods can be used to fabricate various types of suspended microfluidic devices to perform single-cell biopsy and biophysical characterization of single-cells.
In this work, a multiscale 3D printing approach was optimized to fabricate a microfluidic atomic force microscopy (AFM) cantilever that can remove a nucleus from a living cell. With the device mounted on an AFM system, cell experiments were performed, which showed that the nucleus can be removed from a cell using 3D printed microfluidic cantilevers. The printing methods can be used to fabricate various types of suspended microfluidic devices to perform single-cell biopsy and biophysical characterization of single-cells.
Master thesis
(2020)
-
Bogdan Popa, E.L. Fratila-Apachitei, L. Angeloni, M.K. Ghatkesar, M. Nouri Goushki, A.A. Zadpoor
Objectives: With an increasing life expectancy in the western societies and more people practising extreme sports, the demand for orthopaedic implants is set to increase. Orthopaedic implant loosening is one of the main causes of revision surgeries, leading to increases in the costs of patient care and patient dissatisfaction. Better osseointegration could lead to higher success rates of primary interventions. Mesenchymal stem cells (MSC) can undergo osteogenic differentiation on the implant surfaces, promoting the implant osseointegration. Alternatively, they can commit to other differentiation paths (e.g., fibroblasts) and thus hinder the osseointegration and functionality of the implant. It is therefore fundamental to promote the osteogenic differentiation of MSC at the surface of the implant to ensure enhanced osseointegration and thus its long term success. Among the available strategies that promote osteogenic differentiation, nano and micro-scale physical patterns have proved effective but the underlying mechanisms that induce these cellular changes are not yet understood. Cellular adhesion to the surface is believed to be the key process regulating mechanotransduction (i.e., extrinsic cell signalling) and subsequently, the mesenchymal stem cell osteogenic differentiation. Nevertheless, no quantitative systematic study has been performed in order to establish the relationship between the cell adhesion and the differentiation behaviour. Furthermore, the available cellular adhesion studies are only qualitative or semi-quantitative in nature. In this work, novel fluid force microscopy (FFM) technique has been employed to characterize the adhesion properties induced by a set of osteogenic and a set of non-osteogenic submicron patterns. Methods: Two sets of substrates consisting of arrays of submicron pillars with known osteogenic potential were manufactured by means of two photon polymerization. Preosteoblast mouse cells were cultured on the patterns and on a flat control surface. The adhesion properties (i.e., the force and work of adhesion) were measured by FFM after 4 and 24 hours of cell culture. The cellular behaviour picture was completed by assessing the Young’s modulus of the living cells attached on the patterns and on the control surface. Likewise, the topographical and mechanical mapping was performed by using atomic force microscopy system. Results: In this study, the adhesion of preosteoblast cells was successfully quantified on two types of submicron pattern with known osteogenic potential, and compared to cellular adhesion data on a flat control. Therefore, the fluid force microscopy (FFM) was applied for the first time. The trend indicated that cells seeded on the osteogenic substrate adhered stronger (mean force of adhesion = 159 ± 74 nN) than cells on the non-osteogenic substrate (mean force of adhesion = 108 ± 104 nN) after 24h of incubation. Moreover, the cells adopted different morphologies and spatial distribution of the Young’s modulus depending on the culture substrate.
...
Objectives: With an increasing life expectancy in the western societies and more people practising extreme sports, the demand for orthopaedic implants is set to increase. Orthopaedic implant loosening is one of the main causes of revision surgeries, leading to increases in the costs of patient care and patient dissatisfaction. Better osseointegration could lead to higher success rates of primary interventions. Mesenchymal stem cells (MSC) can undergo osteogenic differentiation on the implant surfaces, promoting the implant osseointegration. Alternatively, they can commit to other differentiation paths (e.g., fibroblasts) and thus hinder the osseointegration and functionality of the implant. It is therefore fundamental to promote the osteogenic differentiation of MSC at the surface of the implant to ensure enhanced osseointegration and thus its long term success. Among the available strategies that promote osteogenic differentiation, nano and micro-scale physical patterns have proved effective but the underlying mechanisms that induce these cellular changes are not yet understood. Cellular adhesion to the surface is believed to be the key process regulating mechanotransduction (i.e., extrinsic cell signalling) and subsequently, the mesenchymal stem cell osteogenic differentiation. Nevertheless, no quantitative systematic study has been performed in order to establish the relationship between the cell adhesion and the differentiation behaviour. Furthermore, the available cellular adhesion studies are only qualitative or semi-quantitative in nature. In this work, novel fluid force microscopy (FFM) technique has been employed to characterize the adhesion properties induced by a set of osteogenic and a set of non-osteogenic submicron patterns. Methods: Two sets of substrates consisting of arrays of submicron pillars with known osteogenic potential were manufactured by means of two photon polymerization. Preosteoblast mouse cells were cultured on the patterns and on a flat control surface. The adhesion properties (i.e., the force and work of adhesion) were measured by FFM after 4 and 24 hours of cell culture. The cellular behaviour picture was completed by assessing the Young’s modulus of the living cells attached on the patterns and on the control surface. Likewise, the topographical and mechanical mapping was performed by using atomic force microscopy system. Results: In this study, the adhesion of preosteoblast cells was successfully quantified on two types of submicron pattern with known osteogenic potential, and compared to cellular adhesion data on a flat control. Therefore, the fluid force microscopy (FFM) was applied for the first time. The trend indicated that cells seeded on the osteogenic substrate adhered stronger (mean force of adhesion = 159 ± 74 nN) than cells on the non-osteogenic substrate (mean force of adhesion = 108 ± 104 nN) after 24h of incubation. Moreover, the cells adopted different morphologies and spatial distribution of the Young’s modulus depending on the culture substrate.