Towards Direct Co-culture Models for Osteoimmunodulatory Studies

Towards Direct Co-culture Models for Osteoimmunodulatory Studies: An exploratory study on the effects of nanopatterns and shear stress on cellular crosstalk

Eijkel, Dirk (TU Delft Mechanical, Maritime and Materials Engineering)

Zadpoor, A.A. (graduation committee)
Fratila-Apachitei, E.L. (mentor)
Nouri Goushki, M. (mentor)
Mirzaali Mazandarani, M. (graduation committee)

Delft University of Technology

Biomedical Engineering

2021-05-28

In the last two decades, it has been generally accepted that the interaction between bone and immune cells is critical in the process of bone healing and regeneration. Steering this immune response with the development of biomaterials could lead to implant acceptance in the long term. The understanding of osteoimmunological responses is of high importance in the development of new biomaterials. In order to validate these biomaterials, better in vitro techniques are required that could mimic this inflammatory response immediately after implantation in more detail. This study investigated the effect of a direct co-culture model on a prototype nanopattern. In addition the effect of microflows, that are normally present in vivo, induced inside a microfluidic chip, on mono and co-cultures was investigated in order to improve in vitro research.
Static mono- and co-cultures with a 1:1 (CO11) and 1:2 (CO12) ratio of murine pre-osteoblasts MC3T3-E1s (OBs) and M1 stimulated murine Macrophages J774A.1 (+ LPS & IFN-gamma) were cultured under static conditions for 4 weeks to see the effect of co-culturing on inflammatory markers (TNF-alpha, PGE2, and IL-10) and osteogenic markers (ALP, Runx2 & Alizarin Red Staining). It was found that the use of a co-culture did not have a positive effect on OB differentiation. The introduction of a prototype nanopattern (500 nm height and 300 nm width) that induces a macrophage polarization shift towards an anti-inflammatory phenotype, did have a positive effect on Runx2 secretion in the co-cultures. Furthermore the effect of a dynamic flow, initiated 2 days after seeding, on osteogenic differentiation of OB and CO12 was investigated. After 7 days of dynamic culture, Runx2 levels of the mono-cultures were significantly higher than the static cultures. OBs were positively affected by forming dense cell layers throughout the entire microfluidic channel. For dynamic co-cultures, no to little cells were present inside the channel after 7 days. Finally we attempted to fabricate a microfluidic device that could "sandwich" the patterned waver inside, so the effect of both the nanopattern and microflow on mono- and co-cultures could be investigated. Cells were seeded inside the channel after 1 day, but unfortunately forces on the PMMA layer of this chip resulted in cracks and failure of this system. Our findings in the design and fabrication of the chip can help in future research towards the osteoimmunodulatory properties of biomaterials.
The study on a direct co-culture model, presented in this work, opens possibilities for future research towards co-cultures inside microfluidic devices. It discusses the possibilities and the drawbacks of both the use of co-cultures as the development of microfluidic devices.

Oosteoimmunomodulation
Co-culture
Lab-on-a-chip
Nanopattern
Microfluidics

http://resolver.tudelft.nl/uuid:5976a0eb-860a-48f8-9f51-8713b9dfbbae

2024-05-28

Student theses

master thesis

© 2021 Dirk Eijkel