Searched for: +
(61 - 80 of 348)

Pages

document
Jiang, Aichun (author), Ao, Yibin (author), Yang, Ruo (author), Wang, T. (author)
The rural infrastructures require inclusiveness in the whole lifecycle (WLC) for the benefits of the society. The theory of inclusive growth has been widely studied since its introduction in the infrastructure system research. However, the majority of the related studies has focused on macro level measurements and no systematic research has...
journal article 2023
document
Verma, Amrit Shankar (author), Yan, Jiquan (author), Hu, Weifei (author), Jiang, Zhiyu (author), Shi, Wei (author), Teuwen, Julie J.E. (author)
A fiber-reinforced composite wind turbine blade (WTB) is exposed to numerous impact threats during its service life causing damages that can be detrimental to its structural integrity. Currently, impact loads are not considered during blade design, so high safety factors are introduced, which result in a conservative design. However, as wind...
review 2023
document
Pang, Mijie (author), Jin, J. (author), Segers, Arjo (author), Jiang, Huiya (author), Fang, Li (author), Lin, H.X. (author), Liao, Hong (author)
Super dust storms re-occurred over East Asia in 2021 spring and casted great health damages and property losses. It is essential to achieve an accurate dust forecast to reduce the damage for early warning. The forecasting system fundamentally relies on a numerical model which can forecast the full evolution of dust storms. However, large...
journal article 2023
document
Chen, Wei (author), Jiang, Jing (author), Meda, Abdulmelik H. (author), Ibrahim, Mesfin S. (author), Zhang, Kouchi (author), Fan, J. (author)
SiC MOSFET is mainly characterized by the higher electric breakdown field, higher thermal conductivity, and lower switching loss enabling high breakdown voltage, high-temperature operation, and high switching frequency. However, their performances are considerably limited by the high parasitic inductance and poor heat dissipation capabilities...
journal article 2023
document
Liu, Shurui (author), Lu, T. (author), Tang, Z. (author), Chen, Zhiyuan (author), Jiang, Junmin (author), Zhao, Bo (author), Du, S. (author)
In this article, we propose a reconfigurable regulating rectifier with a wide operational range for wireless power transfer. The proposed three-mode rectifier achieves a broad range voltage regulation without global loop control to minimize the chip area occupation. Compared with previous work, more working modes and greater voltage gain...
journal article 2023
document
Bennour, Ali (author), Jia, Li (author), Menenti, M. (author), Zheng, Chaolei (author), Zeng, Yelong (author), Barnieh, Beatrice Asenso (author), Jiang, Min (author)
Study region: Senegal river (SRB), Niger river (NRB), and Lake Chad basins (LCB). Study focus: We investigated the impacts of land use/land cover change (LULC) and climate variability on the water balance components from 1990 to 2020. We applied the Soil and Water Assessment Tool (SWAT) coupled with remote sensing retrievals of actual...
journal article 2023
document
Jiang, Jing (author), Chen, Wei (author), Qian, Yichen (author), Meda, Abdulmelik H. (author), Fan, X. (author), Zhang, Kouchi (author), Fan, J. (author)
Considerable advancements in power semiconductor devices have resulted in such devices being increasingly adopted in applications of energy generation, conversion, and transmission. Hence, we proposed a fan-out panel-level packaging (FOPLP) design for 30-V Si-based metal-oxide-semiconductor field-effect transistor (MOSFET). To achieve...
journal article 2023
document
An, X. (author), Pan, S. (author), Jiang, H. (author), Makinwa, K.A.A. (author)
CMOS frequency references based on RC oscillators are usually preferred over bulky crystals in loT applications [1-5]. However, due to the process spread and finite temperature coefficient (TC) of most on-chip resistors, RC oscillators require trimming and temperature compensation to achieve decent accuracy. Enabled by high-resolution...
conference paper 2023
document
Ding, Hui (author), Egert, Sonja (author), Huang, Binxiang (author), Jiang, Tianshu (author), Carstensen, Leif (author), Šić, Edina (author), Liu, Yucheng (author), Yang, Tongqing (author), Braga Groszewicz, P. (author)
High-resolution scanning transmission electron microscopy (STEM) enjoys great advantages for atomic-resolution visualization of the atomic structure, while failing to disclose structural information along the atomic columns. On the other hand, solid-state nuclear magnetic resonance (NMR) spectroscopy is highly sensitive to the three...
journal article 2023
document
Tu, Botao (author), Yang, Xinkui (author), Xu, S. (author), Liang, X. (author), Liu, C. (author), Jiang, Jian (author), Fan, Lulu (author), Tu, Liangliang (author)
Using solid waste to replace limestone filler in asphalt concrete can not only reduce the cost of road construction, but also improve the utilization rate of solid waste. In this study, PHC pile waste concrete (PPWC) was innovatively used to replace limestone filler in asphalt mixture and its effect on the physical and rheological properties...
journal article 2023
document
Yang, Xinkui (author), Wu, Shaopeng (author), Xu, S. (author), Chen, B. (author), Chen, Dongyu (author), Wang, Fusong (author), Jiang, Jian (author), Fan, Lulu (author), Tu, Liangliang (author)
Aimed to address the low utilization rate of steel slag (SS) and its challenge in resource utilization in China, this study developed ternary geopolymers made by high-content (50%) SS together with fly ash (FA) and granulated blast furnace slag (GBFS). The effects of GBFS content (0–40%) and curing methods (water curing, standard curing,...
journal article 2023
document
Tu, Botao (author), Yang, Xinkui (author), Xu, S. (author), Zhao, Zenggang (author), Zhou, Yuheng (author), Jiang, Jian (author), Fan, Lulu (author), Tu, Liangliang (author)
As a kind of solid waste, using Prestressed High-Strength Concrete Pile Waste Concrete (PPWC) as the replacement for limestone filler in asphalt concrete can not only reduce the accumulation of PPWC and increase its utilization but also avoid the increased road construction costs and environmental degradation associated with limestone mining....
journal article 2023
document
Yip, Benjamin Rui Peng (author), Javier Vázquez, Ricardo (author), Jiang, Yan (author), McCuskey, Samantha R. (author), Quek, Glenn (author), Ohayon, David (author), Wang, Xuehang (author), Bazan, Guillermo C. (author)
A subclass of organic semiconductors known as conjugated polyelectrolytes (CPEs) is characterized by a conjugated backbone with ionic pendant groups. The water solubility of CPEs typically hinders applications of thin films in aqueous media. Herein, it is reported that films of an anionic CPE, namely CPE-K, drop cast from water produces...
journal article 2023
document
Pan, S. (author), An, Xiaomeng (author), Yu, Zheru (author), Jiang, H. (author), Makinwa, K.A.A. (author)
This article presents the design and implementation of a compact CMOS RC frequency reference. It consists of a frequency-locked loop (FLL) that locks the period of a voltage-controlled oscillator (VCO) to the time an RC network takes to charge to a reference voltage. Conventionally, an RC time constant with a near-zero temperature coefficient...
journal article 2023
document
Li, Wenyu (author), Chen, Wei (author), Jiang, Jing (author), Tang, H. (author), Fan, J. (author)
Double-sided packages for heat dissipation are an efficient thermal management mechanism for power semiconductor devices. A fan-out panel-level packaging (FOPLP), as one of the double-sided forms, exhibits excellent electro–thermal characteristics and provides low stray inductance and thermal resistance. Besides, the temperature at each point...
journal article 2023
document
Liu, Letao (author), Jiang, Xudong (author), Saerbeck, Martin (author), Dauwels, J.H.G. (author)
This paper proposes a Recurrent Affine Transform Encoder (RATE) that can be used for image representation learning. We propose a learning architecture that enables a CNN encoder to learn the affine transform parameter of images. The proposed learning architecture decomposes an affine transform matrix into two transform matrices and learns them...
journal article 2022
document
Jiang, Y. (author), Dai, R. (author), Zeng, J. (author), Butler, R.M. (author), Vijfvinkel, T.S. (author), Wang, Y. (author), van den Dobbelsteen, J.J. (author), van der Elst, M. (author), Dauwels, J.H.G. (author)
Workflow analysis is a young research field that has been gaining traction in recent years. Work in this field aims to improve the efficiency and safety in operating rooms by analysing surgical processes and providing feedback or support, where observations are made and evaluated by algorithms rather than human experts. For our study, we mount...
conference paper 2022
document
Jiang, Jing (author), Wang, S. (author), Liu, X. (author), Liu, Jianhui (author), Li, Jun (author), Zhou, Dexiang (author), Zhang, Kouchi (author), Ye, H. (author), Tan, C. (author)
High electric-field stress is an effective solution to the recovery of irradiated devices. In this paper, the dependence of the recovery level on the magnitude of gate voltage and duration is investigated. Compared with the scheme of high gate-bias voltage with a short stress time, the transfer characteristics are significantly recovered by...
journal article 2022
document
Wang, Kai (author), Xue, Yu (author), Xu, Hao (author), Huang, Lianzhong (author), Ma, Ranqi (author), Zhang, Peng (author), Jiang, X. (author), Yuan, Yupeng (author), Negenborn, R.R. (author), Sun, Peiting (author)
Wing-diesel engine-powered hybrid ships can effectively reduce fuel consumption and CO<sub>2</sub> emissions by using wind energy as the auxiliary driving power. The energy optimization management of the hybrid system can further improve the ship's energy efficiency. To achieve this purpose, it is significant to establish an effective energy...
journal article 2022
document
Morete Barbosa Bertolo, V. (author), Jiang, Quanxin (author), Scholl, Sebastian (author), Petrov, R.H. (author), Hangen, Ude (author), Walters, C.L. (author), Sietsma, J. (author), Popovich, V. (author)
The through-thickness heterogeneous microstructure of thick-section high strength steels is responsible for the significant scatter of properties along the thickness. In this study, in order to identify the critical microstructural features in the fracture behaviour and allow for design optimisation and prediction of structural failure, the...
journal article 2022
Searched for: +
(61 - 80 of 348)

Pages