Searched for: +
(101 - 120 of 188)

Pages

document
Gao, Y. (author), Dong, J. (author), Isabella, O. (author), Santbergen, R. (author), Tan, H. (author), Zeman, M. (author), Zhang, Kouchi (author)
Vertical space bears great potential of solar energy especially for congested urban areas, where photovoltaic (PV) windows in high-rise buildings can contribute to both power generation and daylight harvest. Previous studies on sun-tracking PV windows strayed into the trade-off between tracking performance and mutual shading, failing to achieve...
journal article 2018
document
Yang, G. (author), Guo, Peiqing (author), Procel Moya, P.A. (author), Limodio, G. (author), Weeber, A.W. (author), Isabella, O. (author), Zeman, M. (author)
In this work, we present the application of poly-Si carrier-selective passivating contacts (CSPCs) as both polarities in interdigitated back-contacted (IBC) solar cell architectures. We compared two approaches to form a gap between the back-surface field (BSF) and emitter fingers. It is proved that the gaps prepared by both approaches are...
journal article 2018
document
Ziar, H. (author), Mishra, Sandeep (author), Isabella, O. (author), Zeman, M. (author)
This paper suggests a measurable parameter, the so-called Shading Tolerability (ST), to be added on PV modules datasheet. Using this parameter, PV modules can be compared and classified regarding the ability to oppose shading effects. The parameter is extracted based on mathematical and probability analysis, then measured using a Large Area...
conference paper 2018
document
Tian, Y. (author), Bento Montes, A.R. (author), Isabella, O. (author), Zeman, M. (author)
Regarded as a promising absorber material for solar cell applications, Barium disilicide (BaSi2) is still confronted with issues related to surface oxidation. Here, we use a-Si.H deposited by plasma-enhanced chemical vapor deposition as capping layer to prevent surface oxidation of sputtered BaSi2 films. Based on crystalline quality and...
conference paper 2018
document
Shi, W. (author), Theelen, Mirjam (author), Illiberi, Andrea (author), van der Sar, S.J. (author), Butterling, M. (author), Schut, H. (author), Zeman, M. (author), Brück, E.H. (author), Eijt, S.W.H. (author)
Positron annihilation lifetime spectroscopy (PALS) and Doppler broadening positron annihilation spectroscopy DB-PAS) depth profiling demonstrate pronounced growth of vacancy clusters at the grain boundaries of as-deposited Al-doped ZnO films deposited as transparent conductive oxide (TCO) on Cu(In, Ga)Se2 (CIGS) solar cells upon accelerated...
journal article 2018
document
Yu, Y. (author), Narayan, N.S. (author), Vega Garita, V.E. (author), Popovic, J. (author), Qin, Z. (author), Wagemaker, M. (author), Bauer, P. (author), Zeman, M. (author)
The past few years have seen strong growth of solar-based off-grid energy solutions such as Solar Home Systems (SHS) as a means to ameliorate the grave problem of energy poverty. Battery storage is an essential component of SHS. An accurate battery model can play a vital role in SHS design. Knowing the dynamic behaviour of the battery is...
journal article 2018
document
Rezaei, N. (author), Isabella, O. (author), Vroon, Zeger (author), Zeman, M. (author)
An optical investigation of ultra-thin CIGS solar cells and guidelines for elimination of optical losses is presented. Then, a novel back contacted structure for CIGS solar cells is suggested and optimized for best implied photocurrent density.
conference paper 2018
document
Ruggeri, Edoardo (author), van Aken, Bas (author), Isabella, O. (author), Zeman, M. (author)
Imaging techniques, like electroluminescence and dark lock-in thermography, are valuable quality control tools as they yield quantitative and spatially resolved information about the device. In this paper, we isolated some of the conductive foil–cell interconnections of back-contact solar cells to study the appearance of these...
journal article 2018
document
Ahmadpanahi, S.H. (author), Vismara, R. (author), Isabella, O. (author), Zeman, M. (author)
Periodic texturing is one of the main techniques for light-trapping in thin-film solar cells. Periodicity allows for the excitation of guided modes in the structure and, thus, largely enhances absorption. Understanding how much a guided resonance can increase the absorption is therefore of great importance. There is a common method to understand...
journal article 2018
document
Ahmadpanahi, S.H. (author), Vismara, R. (author), Isabella, O. (author), Zeman, M. (author)
Total electric field in a periodic thin-film structure is described by its Fourier coefficients. These coefficients can be used to calculate the share of different resonances in total absorption in the structure.
conference paper 2018
document
Rezaei, N. (author), Isabella, O. (author), Vroon, Zeger (author), Zeman, M. (author)
A 3-D optical modelling was calibrated to calculate the light absorption and the total reflection of fabricated CIGS solar cells. Absorption losses at molybdenum (Mo) / CIGS interface were explained in terms of plasmonic waves. To quench these losses, we assumed the insertion of a lossless dielectric spacer between Mo and CIGS, whose optical...
journal article 2018
document
Vismara, R. (author), Dane Linssen, N. P. (author), Wang, Ken X. (author), Fan, Shanhui (author), Isabella, O. (author), Zeman, M. (author)
We present a modelling study of thin silicon based solar cells endowed with periodic and decoupled front/back textures. After careful optimization, the proposed device models exhibit absorption beyond the Lambertian light trapping limit for a wide range of light angles of incidence. The advanced light management scheme is applied to (nano...
conference paper 2018
document
Ziar, H. (author), Asaei, Behzad (author), Farhangi, Shahrokh (author), Isabella, O. (author), Korevaar, M.A.N. (author), Zeman, M. (author)
Despite several decades of research in the field of photovoltaic (PV) systems, shading tolerance has still not been properly addressed. PV modules are influenced by shading concerning many factors, such as number and configuration of cells in the module, electrical and thermal characteristics of the cells, number and type of bypass circuits,...
journal article 2017
document
Chandra Mouli, G.R. (author), Schijffelen, Jos H. (author), Bauer, P. (author), Zeman, M. (author)
Grid-connected photovoltaic (PV) inverters have a dc/dc converter connected to the PV for executing the maximum power point tracking. The design of an interleaved boost converter (IBC) with three switching legs for a 10-kW PV inverter is presented in this paper. This paper shows how the use of silicon carbide (SiC) switches and powdered iron...
journal article 2017
document
den Heeten, Thomas (author), Narayan, N.S. (author), Diehl, J.C. (author), Verschelling, Jeroen (author), Silvester, S. (author), Popovic, J. (author), Bauer, P. (author), Zeman, M. (author)
Solar Home Systems (SHSs) can fulfil the basic energy needs of the globally unelectrified population. With costs as one of the biggest barriers for SHS uptake, optimizing the system size with energy needs is crucial. Where most solutions focus only on the present needs, this work also addresses the future energy needs. The methodology includes...
conference paper 2017
document
Xie, L (author), Jarolímek, K. (author), Kocevski, V. (author), Rusz, J. (author), Zeman, M. (author), van Swaaij, R.A.C.M.M. (author), Leifer, K (author)
The optical and electrical properties of Si rich SiC (SRSC) solar cell absorber layers will strongly depend on interfacial layers between the Si and the SiC matrix and in this work, we analyze hitherto undiscovered interfacial layers. The SRSC thin films were deposited using a plasma-enhanced chemical vapor deposition (PECVD) technique and...
journal article 2017
document
Ziar, H. (author), Asaei, Behzad (author), Farhangi, Shahrokh (author), Korevaar, Marc (author), Isabella, O. (author), Zeman, M. (author)
poster 2017
document
van de Loo, B.W.H. (author), Ingenito, A. (author), Verheijen, M.P.A.M. (author), Isabella, O. (author), Zeman, M. (author), Kessels, W. M.M. (author)
Black silicon (b-Si) nanotextures can significantly enhance the light absorption of crystalline silicon solar cells. Nevertheless, for a successful application of b-Si textures in industrially relevant solar cell architectures, it is imperative that charge-carrier recombination at particularly highly n-type doped black Si surfaces is further...
journal article 2017
document
Santbergen, R. (author), Meguro, Tomomi (author), Suezaki, Takashi (author), Koizumi, Gensuke (author), Yamamoto, Kenji (author), Zeman, M. (author)
We present a new version of our optical model for solar cell simulation: GenPro4. Its working principles are briefly explained. The model is suitable for quickly and accurately simulating a wide range of wafer-based and thin-film solar cells. Especially adjusting layer thicknesses to match the currents in multijunction devices can be done...
journal article 2017
document
Santbergen, R. (author), Muthukumar, V.A. (author), Valckenborg, R.M.E. (author), van de Wall, W.J.A. (author), Smets, A.H.M. (author), Zeman, M. (author)
Photovoltaic (PV) modules receive both direct light from the sun and scattered light from the sky, ground and nearby objects. The calculation of incident irradiance becomes complex when nearby objects cast shadows or reflect sunlight onto the PV modules. In this paper a flexible irradiance model is presented that takes all these effects into...
journal article 2017
Searched for: +
(101 - 120 of 188)

Pages