Investigation of the first quasi-rectangular metro tunnel constructed by the 0−θ method

Quasi-rectangular shield tunneling is a cutting-edge trenchless method for constructing metro tunnels with double tubes, owing to its advantages in saving underground space and reducing ground disturbance. However, the conventional quasi-rectangular shield tunneling method is not applicable when constructing a tunnel without a center pillar,...

Double-sided heat dissipation numerical modeling of an embedded half-bridge power module with multiple chips

Thermal management has always played a significant role in power module design. Double-sided heat dissipation is more efficient at transferring heat than the traditional package. Although there are several thermal modeling approaches to power modules, the application of the numerical models, which are computationally fast and accurate, has...

Influence of Fiber Orientation on the Water and Ions Transportation of Engineered Cementitious Composite (ECC)

An engineered cementitious composite (ECC) belongs to a type of high-performance fiber-reinforced materials. Fiber alignment causes the anisotropy of such materials. Herein, the influence of the fiber orientation on water and ion penetration into an ECC was studied. Fiber alignment was achieved using an extrusion approach. Water absorption,...

A state-of-art review on development and progress of backfill grouting materials for shield tunneling

Backfill grouting plays a vital role in shield tunneling. This paper aims to present a comprehensive review of the development and progress of backfill grouting materials specifically designed for shield tunneling. Initially, the various components of grouts, such as pozzolanic materials, filling fine aggregates, and chemical additives, are...

Analysis of Metallization Effects of Pressure-Assisted Cu Nanoparticle Sintering on DBC by Experiment and Nanoscale Simulation

Substrate metallization is a crucial factor affecting the mechanical properties of sintered nanoparticles in microelectronics applications, as it is essential for ensuring good adhesion between the substrate and the sintered material. In this study, we investigated the influence of metallization on pressure-assisted nanocopper sintering and...

Electron-Irradiation-Induced Degradation of Transfer Characteristics in Super-Junction VDMOSFET

High electric-field stress is an effective solution to the recovery of irradiated devices. In this paper, the dependence of the recovery level on the magnitude of gate voltage and duration is investigated. Compared with the scheme of high gate-bias voltage with a short stress time, the transfer characteristics are significantly recovered by...

Morphodynamic changes in the Yangtze Estuary under the impact of the Three Gorges Dam, estuarine engineering interventions and climate-induced sea level rise

The estuarine turbidity maximum (ETM) in the Yangtze Estuary Delta (YED) is muddy by definition and lacks bottom undulations. However, since 2013, a remarkable change has occurred in the YED. Recent images detected by a multibeam echosounder system, SeaBat 7125, for the first time have confirmed widespread regions of subaqueous dunes in the...

Acceleration of corrosion of 304 stainless steel by outward extracellular electron transfer of Pseudomonas aeruginosa biofilm

The influence of outward extracellular electron transfer (EET) of Pseudomonas aeruginosa in accelerating corrosion of 304 stainless steel was investigated. With less NO₃⁻ available as electron acceptor, P. aeruginosa biofilm accelerated the pitting corrosion. The ICP-MS and XPS results indicated that P. aeruginosa...

Effects of shell thickness on the thermal stability of Cu-Ag core-shell nanoparticles: A molecular dynamics study

Cu-Ag core-shell (CS) nanoparticle (NP) is considered as a cost-effective alternative material to nano silver sintering material in die attachment application. To further reduce the cost, the thickness of the Ag shell can be adjusted. Whereas the shell thickness will also affect the thermal stability of the Cu-Ag CSNPs. In this study, molecular...

Effects of Ultrafine Blast Furnace Slag on the Microstructure and Chloride Transport in Cementitious Systems under Cyclic Drying–Wetting Conditions

This paper presents experimental investigations into the effects of ultrafine blast furnace slag on microstructure improvements against chloride penetration in saturated and unsaturated cementitious systems exposed to cyclic drying–wetting conditions. The hydration kinetics of ultrafine slag powders and pore solution chemistry in slag-blended...

Development of an adaptive CTM–RPIM method for modeling large deformation problems in geotechnical engineering

In this paper, a meshfree method called adaptive CTM–RPIM is developed to model geotechnical problems with large deformation. The developed adaptive CTM–RPIM is a combination of the Cartesian transformation method (CTM), the radial point interpolation method (RPIM) and the alpha shape method. To reduce the requirement for meshes, the CTM is...

New innovations in pavement materials and engineering: A review on pavement engineering research 2021

Sustainable and resilient pavement infrastructure is critical for current economic and environmental challenges. In the past 10 years, the pavement infrastructure strongly supports the rapid development of the global social economy. New theories, new methods, new technologies and new materials related to pavement engineering are emerging....

Degradation behaviors and in-vivo biocompatibility of a rare earth- and aluminum-free magnesium-based stent

Biodegradable stents can provide scaffolding and anti-restenosis benefits in the short term and then gradually disappear over time to free the vessel, among which the Mg-based biodegradable metal stents have been prosperously developed. In the present study, a Mg-8.5Li (wt.%) alloy (RE- and Al-free) with high ductility (> 40%) was...

The Impact of Gate Recess on the H2 Detection Properties of Pt-AlGaN/GaN HEMT Sensors

The present work reports on the hydrogen gas detection properties of Pt-AlGaN/GaN high electron mobility transistor (HEMT) sensors with recessed gate structure. Devices with gate recess depths from 5 to 15 nm were fabricated using a precision cyclic etching method, examined with AFM, STEM and EDS, and tested towards H 2 response at high...

The Impact of Gate Recess on the H₂ Detection Properties of Pt-AlGaN/GaN HEMT Sensors

The present work reports on the hydrogen gas detection properties of Pt-AlGaN/GaN high electron mobility transistor (HEMT) sensors with recessed gate structure. Devices with gate recess depths from 5 to 15 nm were fabricated using a precision cyclic etching method, examined with AFM, STEM and EDS, and tested towards H2 response at high...

Impact of high temperature H₂ pre-treatment on Pt-AlGaN/GaN HEMT sensor for H₂S detection

In this paper, a method to extend the detection range of hydrogen sulfide (H₂S) gas sensor is demonstrated. The sensor is based on AlGaN/GaN high electron mobility transistors (HEMTs) with Pt gate. It is observed that the as-fabricated devices exhibited sensing signal saturation at 30 ppm H₂S exposure in dry air. A pre...