SRAM Physical Unclonable Functions (PUFs) are among other things today commercially used for secure primitives such as key generation and authentication. The quality of the PUFs and hence the security primitives, depends on intrinsic variations which are technology dependent. Therefore, to sustain the commercial usage of PUFs for cutting-edge technologies, it is important to properly model and evaluate their reliability. In this work, we evaluate the SRAM PUF reliability using within class Hamming distance (WCHD) for 16nm, 14nm, and 7nm using simulations and silicon validation for both low-power and high-performance designs. The results show that our simulation models and expectations match with the silicon measurements. From the experiments, we conclude the following: (1) SRAM PUF is reliable in advanced FinFET technology nodes, i.e., the noise is low in 16nm, 14nm, and 7nm, (2) temperature variations have a marginal impact on the reliability, and (3) both low-power and high-performance SRAMs can be used as a PUF without excessive need of error correcting codes (ECCs).@en

In this paper, we develop an analytical PUF model based on a compact FinFET transistor model that calculates the PUF stability (i.e. PUF static noise margin (PSNM)) for FinFET based SRAMs. The model enables a quick design space exploration and may be used to identify critical parameters that affect the PSNM. The analytical model is validated with SPICE simulations. In our experiments, we analyze the impact of process variation, technology, and temperature on the PSNM. The results show that the analytical model matches very well with the simulation model. From the experiments we conclude the following: (1) nFET variations have a larger impact on the PSNM than pFET (1.5% higher PSNM in nFET variations than pFET variations at 25°C), (2) high performance SRAM cells are more skewed (1.3% higher PSNM) (3) the reproducibility increases with smaller technology nodes (0.8% PSNM increase from 20 to 14 nm) (4) increasing the temperature from-10°C to 120°C leads to a PSNM change of approximately 1.0% for an extreme nFET channel length.@en