This article presents an extended hybrid modulation (EHM) technique to achieve multistage constant-current (MSCC) charging of electric vehicles using wireless power transfer (WPT) technology. Although most research focuses on constant-current constant-voltage charging, MSCC charging offers key advantages, such as lower temperature rise, decreased charging time, and prolonged battery lifespan. However, the existing phase-shift-modulation (PSM) method encounters substantial circulating reactive power and significant efficiency drops in MSCC charging. To overcome this, an EHM strategy is proposed to expand the modulation range of PSM. By applying EHM to both the inverter and active rectifier, the proposed method provides up to 16 operating modes to facilitate multiple CC outputs. Furthermore, an optimal mode trajectory, specifically designed for the MSCC charging, is developed. By implementing this trajectory across different charging stages, zero-voltage-switching is achieved for all power switches, and the overall power loss of the system is minimized. Finally, a WPT prototype was developed to validate the proposed approach. Experimental results demonstrate that the proposed approach effectively enables the MSCC charging while notably enhancing transmission efficiency, achieving dc-to-dc efficiencies between 92.45% and 95.67% across a power range of 231 to 3.015 kW.

This paper proposes a variable-capacitance-based control strategy to improve efficiency for asymmetric LCC-LCC compensated wireless power transfer (WPT) systems. While the existing triple-phase-shift (TPS) method can achieve power regulation and wide-range zero-voltage-switching (ZVS), it results in significantly increased reactive power under asymmetric LCC-LCC compensation topology. To this end, this paper incorporates a switch-controlled-capacitor (SCC) on the primary side. The impact of variable capacitance on the system characteristics is first investigated. Furthermore, the optimal capacitor tuning factor is derived to achieve the inverter ZVS with minimal reactive power. Through the implementation of variable capacitance, the primary inductor current is notably reduced within a wide range of power. Moreover, the turn-off currents of power switches are minimized. These factors contribute to a reduction in inductor and inverter losses, thus improving the overall efficiency. Experimental results confirm that the proposed method improves the efficiency of an asymmetric LCC-LCC compensated WPT prototype, with a maximum efficiency improvement of up to 1.8%.

This paper studies the power density limits of propulsion motor for electric aircraft considering thermal aspects and breakdown voltage reduction of insulation. The study em-ploys multi-objective optimization (MOO) to explore various mo-tor cooling options and filter configurations. The results show that motors with direct winding heat exchanger (DWHE) can reach higher specific power, while those equipped with water jacket cooling (WJC) offer a moderate design with simpler structure. Furthermore, the impact of sine wave and dv/dt filters on electric motors design is studied. The findings demonstrate that dv/dt filters enable designs with higher overall specific power compared to sine wave filters. Through simulations, this study identify the challenge faced by aviation motor design in significantly increased insulation thickness, necessitating advanced insulation materials with a minimum thermal conductivity of 5 W/(m.K) to facilitate a high specific power design. Based on this assumption, a preliminary design of 9.6 kW/kg with an efficiency of 98% is presented.