BL
Boris Lippe
info
Please Note
<p>This page displays the records of the person named above and is not linked to a unique person identifier. This record may need to be merged to a profile.</p>
5 records found
1
Journal article
(2020)
-
Jason Voorneveld, Hicham Saaid, Sasa Kenjeres, Johan G. Bosch, Christiaan Schinkel, Nikola Radeljic, Boris Lippe, Frank J.H. Gijsen, Antonius F.W. van der Steen, Nico de Jong, Tom Claessens, Hendrik J. Vos
Left ventricular (LV) blood flow is an inherently complex time-varying 3-D phenomenon, where 2-D quantification often ignores the effect of out-of-plane motion. In this study, we describe high frame rate 4-D echocardiographic particle image velocimetry (echo-PIV) using a prototype matrix transesophageal transducer and a dynamic LV phantom for testing the accuracy of echo-PIV in the presence of complex flow patterns. Optical time-resolved tomographic PIV (tomo-PIV) was used as a reference standard for comparison. Echo-PIV and tomo-PIV agreed on the general profile of the LV flow patterns, but echo-PIV smoothed out the smaller flow structures. Echo-PIV also underestimated the flow rates at greater imaging depths, where the PIV kernel size and transducer point spread function were large relative to the velocity gradients. We demonstrate that 4-D echo-PIV could be performed in just four heart cycles, which would require only a short breath-hold, providing promising results. However, methods for resolving high velocity gradients in regions of poor spatial resolution are required before clinical translation.
...
Left ventricular (LV) blood flow is an inherently complex time-varying 3-D phenomenon, where 2-D quantification often ignores the effect of out-of-plane motion. In this study, we describe high frame rate 4-D echocardiographic particle image velocimetry (echo-PIV) using a prototype matrix transesophageal transducer and a dynamic LV phantom for testing the accuracy of echo-PIV in the presence of complex flow patterns. Optical time-resolved tomographic PIV (tomo-PIV) was used as a reference standard for comparison. Echo-PIV and tomo-PIV agreed on the general profile of the LV flow patterns, but echo-PIV smoothed out the smaller flow structures. Echo-PIV also underestimated the flow rates at greater imaging depths, where the PIV kernel size and transducer point spread function were large relative to the velocity gradients. We demonstrate that 4-D echo-PIV could be performed in just four heart cycles, which would require only a short breath-hold, providing promising results. However, methods for resolving high velocity gradients in regions of poor spatial resolution are required before clinical translation.
Journal article
(2018)
-
Michele D'Urbino, Chao Chen, Zhao Chen, Zu-Yao Chang, Jacco Ponte, Boris Lippe, Michiel Pertijs
This paper presents a power- and area-efficient approach to digitizing the echo signals received by piezoelectric transducer elements, commonly used for ultrasound imaging. This technique utilizes such elements not only as sensors but also as the loop filter of an element-level δσ analog to digital converter (ADC). The receiver chain is thus greatly simplified, yielding savings in area and power. Every ADC becomes small enough to fit underneath a 150 μm × 150 μm transducer element, enabling simultaneous acquisition and digitization from all the elements in a 2-D array. This is especially valuable for miniature 3-D probes. Experimental results are reported for a prototype receiver chip with an array of 5×4 element-matched ADCs and a transducer array fabricated on top of the chip. Each ADC consumes 800 μW from a 1.8 V supply and achieves a SNR of 47 dB in a 75% bandwidth around a center frequency of 5 MHz.
...
This paper presents a power- and area-efficient approach to digitizing the echo signals received by piezoelectric transducer elements, commonly used for ultrasound imaging. This technique utilizes such elements not only as sensors but also as the loop filter of an element-level δσ analog to digital converter (ADC). The receiver chain is thus greatly simplified, yielding savings in area and power. Every ADC becomes small enough to fit underneath a 150 μm × 150 μm transducer element, enabling simultaneous acquisition and digitization from all the elements in a 2-D array. This is especially valuable for miniature 3-D probes. Experimental results are reported for a prototype receiver chip with an array of 5×4 element-matched ADCs and a transducer array fabricated on top of the chip. Each ADC consumes 800 μW from a 1.8 V supply and achieves a SNR of 47 dB in a 75% bandwidth around a center frequency of 5 MHz.
Journal article
(2018)
-
Deep Bera, Franc Van Den Adel, Antonius F.W. van der Steen, Johan G. Bosch, Nico de Jong, Nikola Radeljic-Jakic, Boris Lippe, Mehdi Soozande, Michiel A.P. Pertijs, Martin D. Verweij, Pieter Kruizinga, Verya Daeichin, Hendrik J. Vos
We describe a 3-D multiline parallel beamforming scheme for real-time volumetric ultrasound imaging using a prototype matrix transesophageal echocardiography probe with diagonally diced elements and separated transmit and receive arrays. The elements in the smaller rectangular transmit array are directly wired to the ultrasound system. The elements of the larger square receive aperture are grouped in 4 × 4-element sub-arrays by micro-beamforming in an application-specific integrated circuit. We propose a beamforming sequence with 85 transmit–receive events that exhibits good performance for a volume sector of 60° × 60°. The beamforming is validated using Field II simulations, phantom measurements and in vivo imaging. The proposed parallel beamforming achieves volume rates up to 59Hz and produces good-quality images by angle-weighted combination of overlapping sub-volumes. Point spread function, contrast ratio and contrast-to-noise ratio in the phantom experiment closely match those of the simulation. In vivo 3-D imaging at 22-Hz volume rate in a healthy adult pig clearly visualized the cardiac structures, including valve motion.
...
We describe a 3-D multiline parallel beamforming scheme for real-time volumetric ultrasound imaging using a prototype matrix transesophageal echocardiography probe with diagonally diced elements and separated transmit and receive arrays. The elements in the smaller rectangular transmit array are directly wired to the ultrasound system. The elements of the larger square receive aperture are grouped in 4 × 4-element sub-arrays by micro-beamforming in an application-specific integrated circuit. We propose a beamforming sequence with 85 transmit–receive events that exhibits good performance for a volume sector of 60° × 60°. The beamforming is validated using Field II simulations, phantom measurements and in vivo imaging. The proposed parallel beamforming achieves volume rates up to 59Hz and produces good-quality images by angle-weighted combination of overlapping sub-volumes. Point spread function, contrast ratio and contrast-to-noise ratio in the phantom experiment closely match those of the simulation. In vivo 3-D imaging at 22-Hz volume rate in a healthy adult pig clearly visualized the cardiac structures, including valve motion.
Conference paper
(2017)
-
Michele D'Urbino, Chao Chen, Zhao Chen, Zu-Yao Chang, Jacco Ponte, Boris Lippe, Michiel Pertijs
This work presents a compact ADC architecture capable of digitizing the
signals received by every individual element of a 2D ultrasound
transducer array. An element-matched layout of 150 μm × 150 μm is
realized by exploiting each piezo-electric transducer element not only
as the signal source, but also as the electro-mechanical loop-filter of a
continuoustime band-pass ΔΣ ADC, thus minimizing the required circuit
blocks. The transducer's frequency response, which is inherently matched
with the signal bandwidth of interest, provides noise shaping to the
ADC. A prototype chip has been fabricated in a 0.18 μm CMOS technology,
featuring 20 ADCs located directly underneath a 150 μm-pitch
piezo-electric transducer array fabricated on top of the chip. Each ADC,
clocked at 200 MHz, consumes 800 μψ from a 1.8 V supply, and achieves
an SNR of 47 dB in a 75% bandwidth around a center frequency of 5 MHz.
Acoustic measurements show that the ADC successfully digitizes incoming
echo signals.
...
This work presents a compact ADC architecture capable of digitizing the
signals received by every individual element of a 2D ultrasound
transducer array. An element-matched layout of 150 μm × 150 μm is
realized by exploiting each piezo-electric transducer element not only
as the signal source, but also as the electro-mechanical loop-filter of a
continuoustime band-pass ΔΣ ADC, thus minimizing the required circuit
blocks. The transducer's frequency response, which is inherently matched
with the signal bandwidth of interest, provides noise shaping to the
ADC. A prototype chip has been fabricated in a 0.18 μm CMOS technology,
featuring 20 ADCs located directly underneath a 150 μm-pitch
piezo-electric transducer array fabricated on top of the chip. Each ADC,
clocked at 200 MHz, consumes 800 μψ from a 1.8 V supply, and achieves
an SNR of 47 dB in a 75% bandwidth around a center frequency of 5 MHz.
Acoustic measurements show that the ADC successfully digitizes incoming
echo signals.
Abstract
(2017)
-
Deep Bera, Franc Van Den Adel, Johan Bosch, Nico De Jong, Nikola Radeljic-Jakic, Boris Lippe, Mehdi Soozande, Michiel Pertijs, Martin Verweij, Pieter Kruizinga, Verya Daeichin, Hendrik Vos
The design of 3D TEE transducers poses severe technical challenges: channel count, electronics integration with high and low voltages, heat dissipation, etc. We present an adult matrix TEE probe with separate transmit (Tx) and receive (Rx) arrays allowing optimization in both Tx and Rx [1]. Tx elements are directly wired out, Rx employs integrated micro-beamformers in low-voltage (1.8/5.0V) chip technology. The prototype is fully integrated into a gastroscopic tube.
...
The design of 3D TEE transducers poses severe technical challenges: channel count, electronics integration with high and low voltages, heat dissipation, etc. We present an adult matrix TEE probe with separate transmit (Tx) and receive (Rx) arrays allowing optimization in both Tx and Rx [1]. Tx elements are directly wired out, Rx employs integrated micro-beamformers in low-voltage (1.8/5.0V) chip technology. The prototype is fully integrated into a gastroscopic tube.