In recent years, the rapid industrialization and urbanization led to the explosive growth of municipal solid waste incineration (MSWI) bottom ashes (BA) production. However, most of them are directly landfilled, which not only brings environmental burden but also results in loss of potential resources. Present researches have proved that MSWI BA could be utilized as a replacement in Portland cement concrete. However, several drawbacks such as volume expansion, leaching behaviour, and relatively lower strength have been reported. In this study, as-received BA was pretreated to remove the metallic aluminium which is responsible for the hydrogen-induced expansion when blended in OPC concretes. Subsequently, the treated BA samples were used as a substitution for cement at the replacement level of 10%. Micronized sand (M300) was selected as reference materials to investigate the role of treated BA in blended cement system, either as filler or binder material. In the experimental program, the hydration process of different mixtures was monitored by isothermal calorimeter and hydration products were determined by X-ray diffraction (XRD) and Thermalgravimetric analysis (TGA). Results showed that the pretreatment effectively removed the metallic aluminum in BA and no severe expansion or strength decrement were detected. The treated BA showed limited reactivity comparing with Portland cement, however, it still worked better than micronized sand as a filler substitution.@en

At present, most municipal solid waste incineration (MSWI) bottom ash, as being disposed of as waste, is directly landfilled, raising concern about the environmental issue and potential loss of resources. Given that the natural raw materials used for cement production are being depleted, the recycling of MSWI bottom ash for the application as building materials is meaningful and promising. The feasibility of using MSWI bottom ash as mineral additives in concrete has been demonstrated in the literature. In this research, as-received MSWI bottom ash has high mineral content and shows stable leaching behaviour. But, when used as cement substitute, the residual metallic Al in bottom ash always causes matrix swelling and strength loss by reacting with Ca(OH)2 and releasing H2 gas. In this research, dry and wet pretreatment methods were performed to remove the metallic Al in as-received bottom ash (0- 2mm). The results show that both of these two methods are effective. When comparing these two methods, wet method is time-consuming but can remove the metallic Al completely; dry method is fast but always has limitation that it can only reduce the metallic Al content by 80%. Regarding compressive strength, the decrease introduced by 10% dry-treated bottom replacement in cement paste is less than that of wet-treated bottom ash. The lower strength development observed in wet-treated bottom ash blended cement may be due to the removal of soluble reactive phases during the treatment. @en

We present a generic and real-time time-varying point cloud codec for 3D immersive video. This codec is suitable for mixed reality applications where 3D point clouds are acquired at a fast rate. In this codec, intra frames are coded progressively in an octree subdivision. To further exploit inter-frame dependencies, we present an inter-prediction algorithm that partitions the octree voxel space in N times N times N macroblocks (N=8,16,32). The algorithm codes points in these blocks in the predictive frame as a rigid transform applied to the points in the intra coded frame. The rigid transform is computed using the iterative closest point algorithm and compactly represented in a quaternion quantization scheme. To encode the color attributes, we defined a mapping of color per vertex attributes in the traversed octree to an image grid and use legacy image coding method based on JPEG. As a result, a generic compression framework suitable for real-time 3D tele-immersion is developed. This framework has been optimized to run in real-time on commodity hardware for both encoder and decoder. Objective evaluation shows that a higher rate-distortion (R-D) performance is achieved compared to available point cloud codecs. A subjective study in a state of art mixed reality system shows that introduced prediction distortions are negligible compared to the original reconstructed point clouds. In addition, it shows the benefit of reconstructed point cloud video as a representation in the 3D Virtual world. The codec is available as open source for integration in immersive and augmented communication applications and serves as a base reference software platform in JCT1/SC29/WG11 (MPEG) for the further development of standardized point cloud compression solutions.@en