In this thesis we explore the acceleration of sorting algorithms on FPGAs using high bandwidth memory (HBM). The target application is an FPGA as an accelerator in an OpenCAPI enabled system, that enables the accelerator to access main memory of the host at a bandwidth of 25 GB/s for either read or write. We explore under what read and write access patterns the HBM bandwidth of 460.8 GB/s can be met and identify specific circumstances under which this bandwidth can be achieved. The sorting algorithm is implemented in hardware as two steps: partitioning and sorting. We design two partitioning architectures and one sorting architecture. The sorting architecture sorts buckets generated in the partitioning step and is based on merge sort. It uses HBM and wide merge trees to reduce the number of passes through a memory. The architectures themselves are to be instantiated multiple times on the FPGA to achieve a higher sorting throughput. Simulating each architecture at 225 MHz, they are all designed to output up to 3.6 GB/s of 8+8 byte key-value pairs under ideal conditions. We measure the first and second partitioning architectures and identify a bottleneck in HBM for the former, resulting in only 0.44 GB/s with a (uniformly) random input, due to a strided access pattern. With a sorted input, the throughput is 2.18 GB/s. The second partitioning architecture is not affected by this and achieves a throughput of approximately 1.7 GB/s for both types of input. The sorter performs best, sorting buckets at approximately 2.7 GB/s. Synthesis results show that the target FPGA has enough resources for tens of partitioners and sorters, allowing to create a sorting hardware that saturates system bandwidth.

If a practical quantum computer is to be built, it will not only need quantum programming languages and qubits, but hardware-software interfaces as well. These interfaces, also known as computer (micro)architectures are the key to creating a ’quantum stack’, where a programmer can directly execute programs onto quantum hardware. A functional quantum computer microarchitecture, the Central Controller-Light (CCLight), has been designed, implemented on a Field Programmable Gate Array (FPGA), and verified to control superconducting qubits successfully. The next logical step, in hopes of creating a more scalable quantum computing system, is to take the CCLight and implement it as an Application-Specific Integrated Circuit (ASIC). In this thesis, the CCLight was built into an ASIC. It was shown that this approach yields the potential for higher performance and lower power for the microarchitecture core, and the groundwork for more robust and automatic testing of similar microarchitectures was laid out. Lastly, the lack of scalability in the original approach, wherein the processor transmits multi-byte codewords to the analog/RF hardware controlling the qubits, was revealed.