We report the preparation and electrocatalytic performance of silver-containing gas diffusion electrodes (GDEs) derived from a silver coordination polymer (Ag-CP). Layer-by-layer growth of the Ag-CP onto porous supports was applied to control Ag loading. Subsequent electro-decomposition of the Ag-CP resulted in highly selective and efficient CO₂-to-CO GDEs in aqueous CO₂ electroreduction. Afterward, the metal-organic framework (MOF)-mediated approach was transferred to a gas-fed flow electrolyzer for high current density tests. The in situ formed GDE, with a low silver loading of 0.2 mg cm^-2, showed a peak performance of j_CO ≈ 385 mA cm^-2 at around -1.0 V vs RHE and stable operation with high FE_CO (>96%) at j_Total = 300 mA cm^-2 over a 4 h run. These results demonstrate that the MOF-mediated approach offers a facile route for manufacturing uniformly dispersed Ag catalysts for CO₂ electrochemical reduction by eliminating ill-defined deposition steps (drop-casting, etc.) while allowing control of the catalyst structure through self-assembly.

Mesoporous nitrogen-doped carbon nanoparticles with atomically dispersed iron sites (named mesoNC-Fe) are synthesized via high-temperature pyrolysis of an Fe containing ZIF-8 MOF. Hydrolysis of tetramethyl orthosilicate (TMOS) in the MOF framework prior to pyrolysis plays an essential role in maintaining a high surface area during the formation of the carbon structure, impeding the formation of iron (oxide) nanoparticles. To gain inside on the nature of the resulting atomically dispersed Fe moieties, HERFD-XANES, EXAFS and valence-to-core X-ray emission spectroscopies have been used. The experimental spectra (both XAS and XES) combined with theoretical calculations suggest that iron has a coordination sphere including a porphyrinic environment and OH/H₂O moieties responsible for the high activity in CO₂ electroreduction. DFT calculations demonstrate that CO formation is favored in these structures because the free energy barriers of *COOH formation are decreased and the adsorption of *H is impeded. The combination of such a unique coordination environment with a high surface area in the carbon structure of mesoNC-Fe makes more active sites accessible during catalysis and promotes CO₂ electroreduction.

Abstract: Mn and Li promoted Rh catalysts supported on SiO₂ with a thin TiO₂ layer were synthesized by stepwise incipient wetness impregnation approach. The thin TiO₂ layer on the surface of SiO₂ was proved to stabilize those small Rh nanoparticles and hinder their agglomeration. The reducibility of Rh on these catalysts depends on Rh particle size as well as the position of manganese oxide, and large Rh nanoparticles with MnO on Rh nanoparticles can be only reduced at an elevated temperature. Catalyst with large Rh particles exhibits a higher CO conversion and higher products selectivity towards long chain hydrocarbons and C2-oxygenates at the expense of decreasing methane formation than a similar catalyst with smaller Rh particles. This was attributed to the synergistic effect of Mn and Li promotion and molar ratio between Rh⁰ and Rh^δ+ sites on the surface of Rh nanoparticles. Moreover, Rh nanoparticles on MnO are proved to be more efficient in promoting hydrogenation of acetaldehyde to ethanol than its counterpart with MnO on Rh nanoparticles. Finally, in order to target high C2-oxygenates selectivity, low reaction temperature together with a low H₂/CO ratio in the feed is recommended. Graphic Abstract: [Figure not available: see fulltext.].

Increasing helium use in research and production processes necessitates separation techniques to secure sufficient supply of this noble gas. Energy-efficient helium production from natural gas is still a big challenge. Membrane gas separation technology could play an important role. Herein, a novel poly(p-phenylene benzobisimidazole) (PBDI) polymeric membrane for helium extraction from natural gas with low He abundance is reported. The membranes were fabricated by a facile interfacial polymerization at room temperature. The thin and defect-free membrane structure was manipulated by the confined polymerization of monomers diffusing through the interface between two immiscible liquids. Both He/CH₄ selectivity and He permeance are competitive over those of other commercial perfluoropolymers. Even at low He content of 1%, separation performance of the PBDI membrane transcended the current upper bound. The unprecedented selectivity (>1000) together with the excellent stability (∼360 h) endows PBDI membranes with a great potential for energy-efficient industrial recovery and production of this precious He resources from reservoirs with low abundance.

The Ti-containing metal organic framework (MOF) MIL-125 has been used as sacrificial precursor to obtain TiO₂ materials through the MOF-mediated synthesis route. In this study, Fe³⁺ was deposited on the surface of MIL-125 after its hydrothermal synthesis. Targeted Fe-doped titania photocatalysts were prepared through the direct calcination in air of Fe/MIL-125 crystals and/or by using a two-step method, including carbonization in inert atmosphere followed by calcination in air. The relationship between the synthesis conditions and the properties of the Fe-doped titania nanopowders, such as Fe content, porosity, phase composition and particle size was investigated. From elemental mapping, X-ray photoelectron spectroscopy, X-ray absorption spectroscopy, UV–Vis absorption spectroscopy and photoluminescence emission spectra, the presence of highly dispersed Fe³⁺ ions incorporated into the TiO₂ crystal lattice was confirmed, which led to a significant red shift of photoresponse towards visible light and reduced the recombination rate of electron-hole pairs at low iron content. By varying the pre-carbonization temperature, both crystal size and phase composition in the final materials were modulated. The performance of Fe-doped titania materials in photocatalytic water-splitting was tested for hydrogen evolution. Optimal photocatalytic performance was found at 0.15 and 0.5 wt% iron concentration and exceeded those of non-doped titania and commercial anatase both under visible and UV light irradiation, respectively, and among the highest reported in literature for these systems.

Hybrid materials bearing organic and inorganic motifs have been extensively discussed as playgrounds for the implementation of atomically resolved inorganic sites within a confined environment, with an exciting similarity to enzymes. Here, we present the successful design of a site-isolated mixed-metal metal organic framework (MOF) that mimics the reactivity of soluble methane monooxygenase enzyme and demonstrates the potential of this strategy to overcome current challenges in selective methane oxidation. We describe the synthesis and characterization of an Fe-containing MOF that comprises the desired antiferromagnetically coupled high-spin species in a coordination environment closely resembling that of the enzyme. An electrochemical synthesis method is used to build the microporous MOF matrix while integrating the atomically dispersed Fe active sites in the crystalline scaffold. The model mimics the catalytic C-H activation behavior of the enzyme to produce methanol and shows that the key to this reactivity is the formation of isolated oxo-bridged Fe units.

A nitrogen-doped carbon was synthesized through the pyrolysis of the well-known metal-organic framework ZIF-8, followed by a subsequent acid treatment, and has been applied as a catalyst in the electrochemical reduction of carbon dioxide. The resulting electrode shows Faradaic efficiencies to carbon monoxide as high as ∼78%, with hydrogen being the only byproduct. The pyrolysis temperature determines the amount and the accessibility of N species in the carbon electrode, in which pyridinic-N and quaternary-N species play key roles in the selective formation of carbon monoxide.

Advanced atomically resolved characterization methods unveil the mechanism of a promising photocatalytic Co@MOF(Ti) system for H₂ production. The combination of X-ray absorption spectroscopy (XAS) and electron paramagnetic resonance (EPR) experiments allows for the characterization of atomic and electronic rearrangements in the photoinduced species. This information provides the basis for the optimization of photocatalyst design.

A supported cobalt catalyst with atomically dispersed Co-N_x sites (3.5 wt% Co) in a mesoporous N-doped carbon matrix (named Co@mesoNC) is synthesized by hydrolysis of tetramethyl orthosilicate (TMOS) in a Zn/Co bimetallic zeolitic imidazolate framework (BIMZIF(Co,Zn)), followed by high-temperature pyrolysis and SiO₂ leaching. A combination of TEM, XRD XPS and X-ray absorption spectroscopy studies confirm the absence of cobalt nanoparticles and indicate that these highly dispersed cobalt species are present in the form of Co-N_x. The exclusive formation of Co-N_x sites in the carbon matrix is attributed to the presence of a large amount of Zn and N in the BIMZIF precursor together with the presence of SiO₂ in the pore space of this framework, extending the initial spatial distance between cobalt atoms and thereby impeding their agglomeration. The presence of SiO₂ during high-temperature pyrolysis is proven crucial to create mesoporosity and a high BET area and pore volume in the N-doped carbon support (1780 m² g⁻¹, 1.54 cm³ g⁻¹). This heterogeneous Co@mesoNC catalyst displays high activity and selectivity (>99%) for the selective hydrogenation of nitrobenzene to aniline at mild conditions (0.5–3 MPa, 343–383 K). When more challenging substrates (functionalized nitroarenes) are hydrogenated, the catalyst Co@mesoNC displays an excellent chemoselectivity to the corresponding substituted anilines. The presence of mesoporosity improves mass transport of reactants and/or products and the accessibility of the active Co-N_x sites, and greatly reduces deactivation due to fouling.

A quasi chemical vapor deposition method for the manufacture of well-defined covalent triazine framework (CTF) coatings on cordierite monoliths is reported. The resulting supported porous organic polymer is an excellent support for the immobilization of two different homogeneous catalysts: (1) an Ir^IIICp∗-based catalyst for the hydrogen production from formic acid and (2) a Pt^II-based catalyst for the direct activation of methane via Periana chemistry. The immobilized catalysts display a much higher activity in comparison with the unsupported CTF operated in slurry because of improved mass transport. Our results demonstrate that CTF-based catalysts can be further optimized by engineering at different length scales.

The development of catalysts able to assist industrially important chemical processes is a topic of high importance. In view of the catalytic capabilities of small metal clusters, research efforts are being focused on the synthesis of novel catalysts bearing such active sites. Here we report a heterogeneous catalyst consisting of Pd₄ clusters with mixed-valence 0/+1 oxidation states, stabilized and homogeneously organized within the walls of a metal-organic framework (MOF). The resulting solid catalyst outperforms state-of-the-art metal catalysts in carbene-mediated reactions of diazoacetates, with high yields (>90%) and turnover numbers (up to 100,000). In addition, the MOF-supported Pd₄ clusters retain their catalytic activity in repeated batch and flow reactions (>20 cycles). Our findings demonstrate how this synthetic approach may now instruct the future design of heterogeneous catalysts with advantageous reaction capabilities for other important processes.

Covalent triazine frameworks (CTFs) are porous organic materials promising for applications in catalysis and separation due to their high stability, adjustable porosity, and intrinsic nitrogen functionalities. CTFs are prepared by ionothermal trimerization of aromatic nitriles; however, multiple side reactions also occur under synthesis conditions, and their influence on the material properties is still poorly described. Here we report the systematic characterization of nitrogen in CTFs using X-ray photoelectron spectroscopy. With the use of model compounds, we could distinguish several types of nitrogen species. By combining these data with textural properties, we unravel the influence that the reaction temperature, the catalyst, and the monomer structure and composition have on the properties of the resulting CTF materials.

The use of two different classes of covalent organic frameworks (covalent triazine and imine linked frameworks) as supports for molecular Ni²⁺ catalysts is presented. For COFs, a large concentration of N heteroatoms, either in the form of quasi bipyridine or as diiminopyridine moieties, allows for the coordination of NiBr₂ to the scaffold of the porous polymers. When applied as catalysts in the oligomerization of ethylene under mild reaction conditions (15 bar, 50 °C), these new catalysts display an activity comparable to those of their homogeneous counterpart and a fivefold higher selectivity to C₆ ⁺ olefins. Accumulation of long chain hydrocarbons within the porosity of the COFs leads to reversible deactivation. Full activity and selectivity of the best catalysts can be recovered upon washing with dichlorobenzene.