This article introduces a low-jitter low-spur fractional-N phase-locked loop (PLL) adopting a new concept of a time-mode arithmetic unit (TAU) for phase error extraction. The TAU is a time-signal processor that calculates the weighted sum of input time offsets. It processes two inputs - the period of a digitally controlled oscillator (DCO) and the instantaneous time offset between the DCO and reference clock edges - and then extracts the DCO phase error by calculating their weighted sum. The prototype, implemented in 40-nm CMOS, achieves 182-fs rms jitter with 3.5-mW power consumption. In a near-integer channel, it shows the worst fractional spur below -59 dBc. Under considerable supply or temperature variations, the worst spur still remains below -51.7 dBc without any background calibration tracking.@en

In this article, we present a low-power digital phase-locked loop (PLL)-based phase modulator targeting low error vector magnitude (EVM). We introduce a new non-uniform clock compensation (NUCC) scheme to tackle an EVM degradation resulting from the beneficial use of a time-varying sampling clock that is re-timed to the phase-modulated carrier. We also employ a phase-domain digital predistortion (DPD) to combat the intrinsic non-linearity of an LC-type digitally controlled oscillator (DCO), thus avoiding the complications of frequency-dependent calibrations. The prototype, implemented in 40-nm CMOS, modulates the carrier in the range of 2.7-3.9 GHz from a 40-MHz reference. The measured EVM is -47 dB for a 60-Mb/s 64-PSK modulation under the case that the phase-modulated output is frequency-divided by K=8 , i.e., when the DCO exhibits the most significant non-linearity due to the large fractional FM bandwidth. When K=8 or 4, the measured EVM remains below -43 dB across the carrier-frequency tuning range and without re-calibrating the DCO non-linearity.@en

We present a broadband digital PLL (DPLL)-based phase modulator supporting wide frequency modulation (FM) bandwidth (BW). It compensates for the EVM degradation due to the non-uniform period of the retimed updating clock and shortens the nonlinearity calibration time of the digitally controlled oscillator (DCO) with a phase-domain digital pre-distortion (DPD) and an encoding-assisted (EA)-LMS calibration. While generating a 10MHz 64-PSK signal, the prototype can achieve -46dB EVM with less than one-tenth of the calibration samples (time) required by the prior art. @en