This study presents a numerical investigation into the effects of salt crystallisation-induced weathering on masonry earth-retaining walls, with a specific focus on historic quay walls in Amsterdam. A multiphase modelling strategy is adopted to simulate moisture and salt transport, capturing the impact of environmental exposure on these ageing structures. The numerical model is first applied with masonry assumed as a homogeneous continuum and is subsequently refined to incorporate masonry texture. The influence of boundary conditions, multiple weathering cycles, and long-term humidity variations is examined to assess salt accumulation patterns. Results indicate that evaporation pathways significantly influence crystallisation depth, while explicitly modelling masonry texture leads to greater salt accumulation. Furthermore, an analytical estimation of the effective Young's modulus suggests that salt deposition within pores may contribute to through-thickness stiffness variations observed in experimental studies on samples collected from a multi-wythe masonry bridge pillar, with masonry type and exposure conditions comparable to those of Amsterdam's quay walls. These findings provide new insights into the deterioration mechanisms of historic quay walls and highlight the importance of considering environmental effects in their structural assessment.

This study deals with the high-fidelity block-based finite element simulation of dynamic out-of-plane (OOP) responses of unreinforced masonry (URM) walls, explicitly focusing on two-way bending behaviors under seismic loads, which is a common critical failure mode in real-world masonry structures. While experimental shake-table tests provide valuable insights into these behaviors, their high costs, complexity, and limited scalability highlight the need for advanced numerical modeling approaches. A state-of-the-art block-based finite element modeling strategy that conceives masonry as an assemblage of 3D damaging blocks interacting via contact-based cohesive-frictional zero-thickness interfaces, previously proposed for simulating cyclic quasi-static and dynamic one-way bending tests, is here extended for the first time to the simulation of incremental dynamic shake-table tests on OOP two-way spanning URM full-scale walls, subjected to a sequence of dynamic loads. The numerical models track the reference experimental behaviors with high accuracy in terms of collapse onset, failure mechanism, experienced acceleration and displacements, and hysteretic response. The effects of variations in mechanical properties, boundary conditions, and damping on the dynamic response are explored in a sensitivity study. The results indicate that slight changes in these parameters can lead to considerable differences in outcomes. This highlights the chaotic nature of the dynamic response of masonry walls, especially in near-collapse conditions, which makes probabilistic approaches more suitable for predicting masonry OOP dynamics. The proposed numerical methodology appears compatible with statistical frameworks, given the limited costs with respect to experimental tests, and it extends knowledge beyond physical experiments.

In this paper, a numerical procedure is proposed to simulate the dynamic out-of-plane response of unreinforced masonry (URM) walls. A state-of-the-art damaging block-based model, originally developed for quasi-static simulations, is extended for the first time in a dynamic regime. The blocks are represented using solid 3D finite elements governed by a plastic-damage constitutive law for both tension and compression. A cohesive-frictional contact-based formulation is used to account for interactions between the blocks. A simplified mechanical characterization is formulated to improve efficiency in wall-level analyses. Dynamic simulation is performed using a generalized HHT-α direct integration implicit solver and by implementing Rayleigh damping in the bulk. Such consideration allows the use of both mass and stiffness proportional terms of the Rayleigh damping without compromising efficiency. The strategy is applied to simulate incremental dynamic experiments performed on full-scale walls, showing good agreement between numerical and experimental results. The calibrated numerical model is then optimized to reduce computational effort while maintaining accuracy. The optimized model is used to investigate the effect of relative support motion on the one-way bending out-of-plane seismic response of URM walls, demonstrating the potential of the modeling strategy to explore the effect of boundary conditions that occur in real buildings but are often overlooked in laboratory experiments. This investigation also explores the adequacy of simplifications in capturing the effect of relative support motion, which can be adopted for simple modeling strategies commonly used in standard engineering practice.

This recommendation is devoted to testing the resistance of natural stone and fired-clay brick units against salt crystallization. The procedure was developed by the RILEM TC 271-ASC to evaluate the durability of porous building materials against salt crystallization through a laboratory method that allows for accelerated testing without compromising the reliability of the results. The new procedure is designed to replicate salt damage caused by crystallization near the surface of materials as a result of capillary transport and evaporation. A new approach is proposed that considers the presence of two stages in the salt crystallization test. In the first, the accumulation stage, salts gradually accumulate on or near the surface of the material due to evaporation. In the second, the propagation stage, damage initiates and develops due to changes in moisture content and relative humidity that trigger salt dissolution and crystallization cycles. To achieve this, two types of salt were tested, namely sodium chloride and sodium sulphate, with each salt tested separately. A methodology for assessing the salt-induced damage is proposed, which includes visual and photographical observations and measurement of material loss. The procedure has been preliminarily validated in round robin tests.

Masonry structures, although classically suitable to withstand gravitational loads, are sensibly vulnerable if subjected to extraordinary actions such as earthquakes, exhibiting cracks even for events of moderate intensity compared to other structural typologies like as reinforced concrete or steel buildings. In the last half-century, the scientific community devoted a consistent effort to the computational analysis of masonry structures in order to develop tools for the prediction (and the assessment) of their structural behavior. Given the complexity of the mechanics of masonry, different approaches and scales of representation of the mechanical behavior of masonry, as well as different strategies of analysis, have been proposed. In this paper, a comprehensive review of the existing modeling strategies for masonry structures, as well as a novel classification of these strategies are presented. Although a fully coherent collocation of all the modeling approaches is substantially impossible due to the peculiar features of each solution proposed, this classification attempts to make some order on the wide scientific production on this field. The modeling strategies are herein classified into four main categories: block-based models, continuum models, geometry-based models, and macroelement models. Each category is comprehensively reviewed. The future challenges of computational analysis of masonry structures are also discussed.

In this paper, a damaging block-based model is proposed for the numerical analysis of the cyclic behaviour of full-scale masonry structures. Solid 3D finite elements governed by a plastic-damage constitutive law in tension and compression are used to model the blocks, while a cohesive-frictional contact-based formulation is developed to simulate their cyclic interaction. The use of tests on small-scale specimens to calibrate the mechanical properties of the numerical model is presented and discussed. The tests belong to a comprehensive experimental campaign performed on calcium silicate brick masonry. The calibrated models are used to simulate in-plane and out-of-plane cyclic tests on masonry walls made of the same material, as well as a quasi-static cyclic pushover test on a full-scale terraced masonry house. The efficiency, the potentialities and the accuracy of the model here proposed are shown and discussed. The capability of explicitly representing structural details (e.g. running bonds) and any in-plane and through-thickness texture of masonry, which appears essential to study the response of masonry structures, is guaranteed by the block-based modelling approach. A good agreement between the numerical results and the experimental outcomes is observed. This allows to validate the model in the cyclic response as well as the strategy proposed for its mechanical characterization.

Several tools for the prediction and the assessment of the structural behavior of masonry buildings have been developed in recent decades. Numerical tools have been favorably developed and preferred over analytical approaches, given the complex mechanical response of masonry and the irregular geometries of historic masonry buildings. In this chapter, a thorough review of numerical strategies for the analysis of masonry structures is presented. Additionally, classification of these strategies is also suggested to logically organize the extensive literature on this topic. Even though a wholly congruent categorization of all the numerical tools is essentially unrealistic given the specific aspects of each solution developed, the existing numerical strategies are subdivided into four classes: block-based models, continuum models, geometry-based models, and macroelement models. Each class is thoroughly reviewed and the open challenges in numerical modeling of masonry structures are critically examined.