Due to their loosely coupled and highly dynamic nature, service-oriented systems offer many benefits for realizing fault tolerance and supporting trustworthy computing. They enable automatic system reconfiguration when a faulty service is detected. Spectrum-based fault localization (SFL) is a statistics-based diagnosis technique that can be effectively applied to pinpoint problematic services. However, SFL exhibits poor performance in diagnosing services which are tightly interacted. Previous research suggests that an increase in the number of monitoring locations may improve the diagnosability for tight interaction. In this paper, we analyze the trade-offs between the diagnosis improvement through increased monitoring granularity and the overhead caused by the introduction of more monitors, when diagnosing tightly interacted faulty services. We apply SFL in a service-based system, for which we show that 100 % correct identification of faulty services can be achieved through the increased monitoring granularity. We assess the overhead with increased monitoring granularity and compare this with the original monitoring setup. Our experimental results show that the monitoring at the service communication level causes relatively high overhead, whereas the monitoring overhead at a finer level of granularity, i.e., at the service implementation level, is much lower, but highly dependent on the number of monitors deployed.

This paper presents a custom-designed single-cable readout IC for the reception of the broadband photoacoustic (PA) signal in intravascular photoacoustic (IVPA) imaging. The readout IC is intended for direct integration behind a broadband polyvinylidene fluoride (PVDF) transducer in an IVPA catheter tip to match the impedance between the small PVDF element and the connecting cable. The capability of the readout IC to work with a single cable that combines the output signal and the power supply ensures the mechanical flexibility of the IVPA catheter. Electrical measurements show that the readout IC provides a flat frequency response from 1 MHz to 20 MHz with a 6 mA external current supply. The acoustical measurements involving the readout IC and the PVDF transducer demonstrate a 60 dB dynamic range, a sensitivity of 3.8 μV/Pa at 2.25 MHz, and a broad receiving bandwidth from 2 MHz to 15 MHz.