The global market for offshore wind energy is currently experiencing tremendous growth, which is expected to continue in the coming decades. Monopiles are one of the most frequently used foundations for Offshore Wind Turbines (OWTs) and are commonly driven into the seabed using impact hammering. The demand for higher capacity OWTs requires the installation of larger monopiles. As monopiles, however, become bigger their installation with hammering and mitigation of generated noise becomes challenging and costly. To optimize installation and to limit noise emissions, an innovative installation technique known as the Gentle Driving of Piles, GDP, has been developed. This technique combines vertical and torsional vibrations under different frequencies with the main driving assistance coming from the torsional force. This paper presents and discusses the results from a series of lab-scale pile driving tests performed in dense sand using the GDP method. For these tests, a lab-scale GDP shaker has been mobilized. During installation of the scaled piles, the frequencies and amplitudes of the vertical and torsional excitation were varied independently with the objective to increase the penetration speed. The results show improved pile driveability with high-frequency, low-amplitude torsional vibrations and showcase the potential of the GDP method in improving installation performance.

Due to the rapid expansion of the offshore wind industry, wind farms are being developed in areas where glauconite soils are encountered. Of particular interest for the development of windfarms in regions dominated by glauconite sand deposits is the risk associated with the presence of this geomaterial. It is acknowledged that glauconitic soils pose significant challenges during pile installation due to their high susceptibility to particle crushing at relatively low stress levels. This transforms the sand into a low-permeable fine-grained clay-like material, leading to a complex response upon shearing as a result of the change in soil behaviour. In this study, the geotechnical behaviour of a glauconite sand from the Antwerp region in Belgium is investigated by means of a laboratory testing program comprising of index classification tests, compression, direct shear and interface shear strength tests. The laboratory test data are interpreted to improve understanding of the geotechnical properties of this peculiar geomaterial and evaluate its potential implications during pile driving.

Conventional scour protection installation around monopiles for offshore wind farms involves placement of smaller filter layer rocks and larger armor layer rocks in two separate operations, requiring multiple visits of the rock dumping vessel to the site which increases costs, time spent offshore by the vessels, and consequently carbon emissions. The joint industry project Optimizing Pile Installation through Scour Protection (OPIS), established in 2023, helps reaching the target of energy transmission by streamlining the pile and scour protection installations, reducing costs and carbon emissions associated with offshore wind developments. The project investigates the technical feasibility of pile installation through coarse rock to enhance the feasibility of the operation. A series of small and medium scale laboratory experiments has been conducted, considering different scour protection designs such as single- and double-layer systems, and different rock densities (high and normal density rocks). This paper delves into the physical modelling aspects of the OPIS research project. Furthermore, this contribution elaborates on the design and intricacies of the scaled laboratory tests, providing in-depth insights into the design and implementation of laboratory setups, along with a detailed account of experimental procedures. Moreover, preliminary results and challenges encountered during the experiments are discussed, and innovative solutions devised to overcome specific challenges are highlighted.

The MIDASclay project (Monopile Improved Design via Advanced Cyclic Soil Modelling in Clay) aims to evaluate the cyclic lateral behaviour of monopiles in clays and clay-sand mixtures, focusing on developing a cyclic soil reaction model that captures cyclic ratcheting and operational stiffness in cohesive soils. Together with the MIDAS project – aimed at cyclic behaviour of monopiles in sand, it seeks to establish a comprehensive framework for modelling the cyclic lateral response of monopiles across diverse soil conditions. To address knowledge gaps, the project employs centrifuge testing of monopiles under cyclic lateral loads, aiming to produce a soil reaction model tailored to cohesive soils. This paper outlines the project setup, research plan, and initial findings. Early results from an auxiliary centrifuge test highlight the preparation of highly over-consolidated samples and provide insights into the influence of clay properties on monopile behaviour. MIDASclay is expected to support and advance design methodologies for monopiles in cohesive soils.

Gentle Driving of Piles (GDP) is a new technology for the vibratory installation of tubular (mono)piles. Its founding principle is that both efficient installation and low noise emission can be achieved by applying to the pile a combination of axial and torsional vibrations. Preliminary development and demonstration of the proposed technology are the main objectives of the GDP research programme. To this end, onshore medium-scale tests in sand have been performed on piles installed using both impact and vibratory driving methods (including GDP). After presenting the development of a purpose-built GDP driving device and the geotechnical characterisation of the site, this paper covers the execution of GDP installation tests. Focus is on the installation performance of GDP-driven piles, which is discussed with the aid of structural and ground monitoring data. The comparison between piling data associated with GDP and standard axial vibro-driving points out the potential of the proposed installation technology, particularly with regard to the beneficial effect of the torsional vibration component. The findings of this study encourage further development of the GDP method and its future extension to offshore full-scale conditions.

The response of monopiles to lateral loading has attracted considerable research interest in recent years. As monopile foundations are exposed to ever-harsher environmental conditions, the engineering tools used for their simulation should continually update and improve. Recently, the challenge of simulating the behaviour of monopiles under lateral loads has been addressed to a significant extent through a combination of numerical modelling and experimental data. Although monotonic response calculations are still relevant to monopile design, it should be acknowledged that offshore environmental loads are inherently cyclic. To improve the engineering tools for the simulation of cyclic monopile behaviour and our understanding of the relevant geotechnical mechanisms, this study presents and discusses the outcome of advanced 1D cyclic soil reaction modelling of monopile-soil interactions employed to simulate centrifuge data conducted as part of the MIDAS research project. The memory-enhanced p-y model proves capable of simulating cyclic ratcheting behaviour in complex loading histories, which promotes the discussion for the evolution of relevant soil reaction mechanisms during cyclic loads. Finally, preliminary calibration strategies for the employed cyclic soil reaction models are presented.

Gentle Driving of Piles (GDP) is a new technology for the vibratory installation of tubular (mono)piles. Its founding principle is that both efficient installation and low noise emission can be achieved by applying to the pile a combination of axial and torsional vibrations. Preliminary development and demonstration of the proposed technology are the main objectives of the GDP research programme. To this end, onshore medium-scale tests in sand have been performed on piles installed using both impact and vibratory driving methods (including GDP). While the results of the installation tests are presented by Tsetas et al. (2023), this work focuses on the post-installation performance of GDP-driven piles under a sequence of slow/large-amplitude (cyclic) and faster/low-amplitude (dynamic) load parcels. The field data point out the influence of onshore unsaturated soil conditions, which result in complex cyclic pile stiffness trends due to the interplay of pile–soil gapping and soil's fabric changes. The pile stiffness under small-amplitude vibrations is strongly correlated with the previous response to large load cycles, and noticeably frequency-dependent for load cycles with a period lower than 1 s. Overall, the post-installation performance of GDP-driven piles appears to be satisfactory, which encourages further development and demonstration at full scale.

The vibratory installation of monopiles as foundation for offshore wind turbines is considered a plausible solution next to the conventional installation method (impact-hammering). One of the main advantages is the lower noise emissions, reducing harm to the marine life. However, knowledge on the effects of the vibratory installation parameters on the lateral response of monopiles – and how these effects differ from those caused by impact-driving – is limited. This paper presents the results from an ongoing Joint Industry Project (SIMOX) with focus on 1g laboratory tests carried out in a 9.0m x 5.5m x 2.5m tank with saturated sand at Deltares, the Netherlands. The tests involve the installation (impact and vibratory) of scaled piles with 32 cm diameter, embedment length of 1.5 m and two wall thicknesses. The lateral loading regime consisted of monotonic and cyclic lateral loading. The results show the effect of soil density and different installation parameters of vibratory installation on the lateral response of the piles compared to a conventional impact installation.

A novel pile-driving technique, named Gentle Driving of Piles (GDP), that combines axial low-frequency and torsional high-frequency vibrations has been developed and tested recently. During the experimental campaign, several piles were installed onshore, making use of the GDP shaker. Besides those, a number of additional piles were installed using conventional pile-driving techniques, i.e. impact piling and axial vibratory driving. After the completion of the installation phase, the installed piles have been subjected to impact hammer tests with the following goals. First, the in-situ dynamic properties of the pile-soil system have been identified. Second, the post-installation soil state has been investigated, along with its evolution in time for each pile driving scenario. Preliminary analyses, of the data collected during the impact tests show dissimilar trends in the overall dynamic response between the piles installed with impact hammer and those installed with the axial and the GDP shakers.This observation suggests a difference in the post-installation dynamic behaviour of the pile-soil systems related to different pile-driving techniques. In this paper, a first attempt is made to identify the differences in the overall pile-soil dynamic behaviour of the piles installed by means of the three different pile-driving techniques.