Advancements in Artificial Intelligence (AI) and Internet-of-Things (IoT) have increased demand for edge AI, but deployment on traditional AI accelerators, like GPUs and TPUs, using von Neumann architecture, suffer from inefficiencies due to separate memory and compute units. Computation-in-Memory (CIM), utilizing non-volatile memristor devices to leverage analog computing principles and perform in-place computations, holds great potential in improving computational efficiency by eliminating frequent data movement. However, standard implementation of CIM faces several challenges, primarily high power consumption and subsequently induced nonlinearity, debating its viability for edge devices. In this paper, we propose C3CIM, a novel memristor-based CIM micro-architecture, featuring a new bit-cell and array design, targeting efficient implementation of Neural Networks (NN). Our architecture uses a constant current source to perform Multiply-and-Accumulate (MAC) operations with a very low computation current (10 to 100 nA), thereby significantly enhancing power efficiency. We adapted C3CIM for Spiking Neural Networks (SNN) and developed a prototype using TSMC 40nm CMOS node for on-silicon validation. Furthermore, our micro-architecture was benchmarked using two SNN models based on N-MNIST and IBM-Gesture datasets, for comparison against current state-of-the-art (SOTA). Results show up to 35x reduction in power along with 6.7x saving in energy compared to SOTA, demonstrating promising potential of this work for edge AI applications.

Artificial Intelligence (AI) supported by Deep Artificial Neural Networks (ANNs) is booming and already used in many applications, with impressive results, and we are still its infancy. For many sensing applications it would be advantageous if we could move AI from cloud to Edge. However this requires huge improvements in energy-efficiency. The CONVOLVE project (convolve.eu) aims at enabling smart edge devices through a concerted effort at all layers of the design stack. This ranges from using much more efficient models and mappings, like exploiting Spiking Neural Networks (SNNs), to new processing architectures, like compute-in-memory (CIM), use of approximation, and using new device technology, like memristors. However these latter changes make HW more susceptible to noise and other disturbances. Online continuous learning (i.e. adapting weights) may alleviate these problems. This paper shows several CONVOLVE developments in the crucial areas of CIM architectures, SNN accelerators and online learning.