Ferroelectric Field-Effect Transistors (FeFETs) are promising candidates for non-volatile memory (NVM) technologies, especially in embedded systems and edge computing. However, due to their physical characteristics, FeFETs exhibit unique defects—such as Threshold Voltage Shifting (TVS) caused by trap charges in the oxide layer—that are not captured by conventional defect models. This study adopts the Device-Aware Test (DAT) methodology to model these defects by incorporating their impact into the electrical parameters, calibrated using measurement data. Defect injection, circuit-level simulations, and fault analysis are performed to derive realistic fault models. Finally, the March algorithm and Design-for-Test (DfT) techniques are proposed to effectively detect these defects.

As emerging non-volatile memory (NVM) devices, Ferroelectric Field-Effect Transistors (FeFETs) present distinctive opportunities for the design of ultra-dense and low-leakage memory systems. For matured FeFET manufacturing, it is extremely important to have an understanding of manufacturing defects and accurately model them to develop effective test solutions. This paper introduces a comprehensive framework for defect and fault modeling, which enables the development of test solutions. First, a classification of FeFET manufacturing defects is provided; both conventional defects (such as contacts and interconnect defects) as well as unique FeFET defects are discussed. The latter FeFET specific defect leads to unique faults that cannot be adequately described using traditional modeling approaches. Then, the Device-Aware Test (DAT) method is used to effectively and appropriately model, analyze and develop test solutions for such unique defects; the approach will be illustrated for Stuck-at-Polarization (SAP) defects.