Distributed secondary control achieves voltage restoration and power sharing through communication among adjacent units but exposes the microgrid to potential cyber-attacks. Traditional mitigation strategies modify the secondary controller after the attack, addressing the issue only postoccurrence. Furthermore, in microgrid planning, the structure of the communication network significantly influences the resilience to attacks, but it remains to be explored. This article presents a proactive defense mechanism by designing a resilient communication network. The proposed method quantifies the impact of attacks and develops a multiobjective optimization algorithm to design the network, considering quantified attacks, convergence, time-delay robustness, and communication costs. The method is validated through OPAL-RT simulations of an islanded microgrid with ten converters.

Grid-following control (GFL) has been widely implemented as the dominant control method for inverter-based resources (IBR). However, because GFL cannot provide sufficient inertia for frequency regulation, grid-forming control (GFM) is proposed as an alternative solution. However, the impact of grid dynamics characteristics on GFL and GFM control is rarely discussed. Therefore, this paper systematically derives and compares the frequency response of GFL and GFM control, considering the grid dynamics that are emulated by a synchronous generator. The impact of the inertia of GFM is investigated by pole-zero maps.

Accurate battery capacity estimation is essential for the effective and reliable operation of lithium-ion battery management systems. Battery impedance is a key parameter that encapsulates electrochemical information, closely correlating with the internal states of batteries. This study proposes a novel capacity estimation framework that effectively balances accuracy, efficiency, and practicality. Firstly, a novel feature extraction method is introduced to extract health features from the imaginary impedance at a single frequency. The extracted feature demonstrates a strong and stable correlation with battery degradation under various operation conditions, while significantly reducing data requirements. To address the impact of diverse degradation patterns on estimation accuracy, an initial adjustment method is applied to precisely retrace the relative degradation paths of batteries. The results show that the mean absolute percentage error of battery capacity estimation decreases from 15.65% to 2.87%. Additionally, a transformer-based capacity estimation model is developed, which integrates a feature fusion unit to explicitly eliminate the influence of temperature on model performance. As a result, the model's accuracy improves by over 28% under various thermal conditions.

Partially rated DC interlinking converters are recognized for their high-gain power regulation capabilities, which effectively synergize active power across DC microgrids (DCMGs). Integrating energy storage units (ESUs) to address the intermittent nature of renewables in DCMGs has become an enhanced requirement for these converters. This article proposes a partially rated multiport interlinking converter (PMIC) that incorporates a distributed ESU. The PMIC controls a floating voltage and a bidirectional shunt current on the DC line, ensuring full galvanic isolation for the ESU while operating at a low DC-link voltage. It regulates multidirectional power flow and balances power during peak and off-peak periods. A decentralized droop-based power flow control strategy is proposed for the PMIC, which distributes renewable energy generation, load consumption, and ESU utilization proportionally across the system. The control strategy includes two tailored continuously differentiable activation functions, Sigmoid and Hyperbolic Tangent, to facilitate autonomous global power-sharing and seamless ESU engagement. Simulation and experimental case studies confirm the PMIC's capability to smooth renewable energy fluctuations and enhance the power and voltage profiles of DCMGs.

A fast and efficient charging infrastructure has become indispensable in the evolving energy landscape and thriving electric vehicle (EV) market. Irrespective of the charging stations’ internal alternating current (AC) or direct current (DC) bus configurations, the main concern is the exponential growth in charging demands, resulting in network congestion issues. In the context of exponential EV growth and the provision of charging facilities from low-voltage distribution networks, the distribution network may require frequent upgrades to meet the rising charging demands. To avoid network congestion problems and minimize operational expenses (OE) by integrating energy storage systems (ESS) into ultra-fast charging stations (UFCS). This paper presents a techno-economic analysis of a UFCS equipped with a battery ESS (BESS). To reduce reliance on the electric grid and minimize OE, a dual-objective optimization problem is formulated and solved via grid search and dual-simplex algorithms. Analytical energy and physical BESS models are employed to evaluate the optimization matrices. The intricacies of BESS aging are examined to ensure an optimal BESS size with a more extensive lifespan than the corresponding payback period. The integrated BESS significantly reduced reliance on the grid to tackle network congestion while fulfilling charging demands. The dynamic pricing (DP) structure has proven more favorable, as the average per unit cost remains lower than the static tariff (ST). Results illustrate that integrating BESS reduces the OE and peak-to-average ratio (PAR) by 5-to-49% and 16-to-73%, respectively. Moreover, the combination of 70% BESS and 30% grid capacities outperforms the other configurations with a 73% reduction in PAR and a 49% reduction in OE before BESS reaches the end-of-life.

Consensus algorithm-based secondary control, such as virtual impedance, is typically used to achieve power-sharing and ensure stable operation in microgrids. The introduction of communication, however, increases the system's vulnerability. Communication failure, e.g., under cyber attack or disruption, can lead to a huge loss. To solve this, this article proposes a signal reconstruction approach for the miscommunicated signals. The power-sharing convergence, both in normal conditions and under communication failure, is analyzed via the Lyapunov method. The feasibility and effectiveness of the proposed approach are validated on a lab-scale microgrid.

Highly self-sufficient energy hubs offer a promising solution to mitigate grid congestion in favor of grid operators and to reduce grid fees for the benefit of energy hub operators. Meanwhile, the energy hub's capacity may far exceed the grid connection capacity, creating a weak grid situation. As a result, power quality issues such as voltage fluctuations, frequency deviations, and even instability may occur. In this work, a grid-forming energy storage system (GFM-ESS) is integrated to address these potential problems. A model of the GFM-ESS and energy hub is established based on a 50 kW PV-Hydrogen energy hub demonstrator, where PV-generated power is utilized for green hydrogen production. A trade-off design is proposed to identify the optimal balance between the capacity of the GFM-ESS and the grid connection. The voltage and frequency response at the hub's bus are analyzed to evaluate this trade-off. While experiments with the 50 kW demonstrator are ongoing, simulation results are provided to validate the effectiveness of the proposed design.

Insulated Gate Bipolar Transistor (IGBT) is the core component of current converter equipment in application scenarios such as flexible DC transmission and flexible AC transmission, and its junction temperature increases significantly with the increase of current level. Therefore, the junction temperature control of IGBT devices has become one of the bottlenecks to further increase the transmission capacity. Al/Diamond material has a much higher thermal conductivity than traditional packaging materials and a smaller coefficient of thermal expansion, so applying Al/Diamond material to IGBT packaging may improve the heat dissipation ability of IGBT and thus reduce the junction temperature. This paper constructs the IGBT model based on Al/Diamond material and the IGBT model based on traditional copper material through COMSOL simulation software, and compares the internal electro-thermal-stress distribution of the two models. In addition, this paper calculates the maximum and average values of temperature, maximum and average values of thermal stress and other parameters of each component inside the model according to the simulation data set. After comparison, it can comprehensively reflect the greater enhancement of heat dissipation capability of IGBT after applying Al/Diamond material to its encapsulation, which provides guidance for the subsequent research on the encapsulation optimization mechanism of high-power IGBT devices based on Al/Diamond material and the actual device fabrication.

The State of Health (SOH) is a crucial component of battery management systems (BMSs), offering important health information and protection against unsafe usage. In this paper, an accurate model for SOH estimation of Li-ion batteries was developed, which is uniquely characterized by using only the imaginary part of impedance at a specific frequency for precise SOH estimation. Through the identification of the relationship between impedance at a specific frequency and capacity degradation using correlation coefficients, the feature data most closely related to battery aging was selected. Next, the battery aging modeling and SOH estimation were validated on nine batteries across three different temperatures using a Feed-forward Neural Network (FNN). The validation results indicated that the proposed method has a high estimation accuracy, achieving a Mean Absolute Percentage Error (MAPE) of merely 2.05% throughout the entire lifecycle of the battery 45C02 during tests at a temperature of 45°C.

Traditional methods such as Steinmetz's equation (SE) and its improved variant (iGSE) have demonstrated limited precision in estimating power loss for magnetic materials. The introduction of Neural Network technology for assessing magnetic component power loss has significantly enhanced accuracy. Yet, an efficient method to incorporate detailed flux density information—which critically impacts accuracy—remains elusive. Our study introduces an innovative approach that merges Fast Fourier Transform (FFT) with a Feedforward Neural Network (FNN), aiming to overcome this challenge. To optimize the model further and strike a refined balance between complexity and accuracy, Multi-Objective Optimization (MOO) is employed to identify the ideal combination of hyperparameters, such as layer count, neuron number, activation functions, optimizers, and batch size. This optimized Neural Network outperforms traditionally intuitive models in both accuracy and size. Leveraging the optimized base model for known materials, transfer learning is applied to new materials with limited data, effectively addressing data scarcity. The proposed approach substantially enhances model training efficiency, achieves remarkable accuracy, and sets an example for Artificial Intelligence applications in loss and electrical characteristic predictions with challenges of model size, accuracy goals, and limited data.

This article summarizes the main results and contributions of the MagNet Challenge 2023, an open-source research initiative for data-driven modeling of power magnetic materials. The MagNet Challenge has (1) advanced the state-of-the-art in power magnetics modeling; (2) set up examples for fostering an open-source and transparent research community; (3) developed useful guidelines and practical rules for conducting data-driven research in power electronics; and (4) provided a fair performance benchmark leading to insights on the most promising future research directions. The competition yielded a collection of publicly disclosed software algorithms and tools designed to capture the distinct loss characteristics of power magnetic materials, which are mostly open-sourced. We have attempted to bridge power electronics domain knowledge with state-of-the-art advancements in artificial intelligence, machine learning, pattern recognition, and signal processing. The MagNet Challenge has greatly improved the accuracy and reduced the size of data-driven power magnetic material models. The models and tools created for various materials were meticulously documented and shared within the broader power electronics community.

This paper concerns the control problem of the active caused by the mismatched impedance in resistive feeders-dominated microgrids. A distributed model predictive control (DMPC) scheme is suggested to regulate the virtual impedance of each involved unit. Moreover, the proposed method benefits resilience to communication failure by designing the communication matrix. Furthermore, it involves propagating information among units in a short period, significantly reducing the communication and computation burden. Finally, the performance of the proposed control scheme is evaluated in terms of its convergence, robustness to communication delay and load variations, resilience to communication failure, and plug-and-play functionality without communication in an inverter-connected system.

This paper presents a control strategy for active power decoupling in a Solid State Transformer (SST) using a cascaded H-bridge (CHB) converter, dual active bridge (DAB) converters, and a high-frequency link (HFL). The strategy balances capacitor voltage and decouples power flow, significantly reducing second harmonic voltage ripple in DC link capacitors and potentially reducing their size.

This article introduces an auxiliary power supply (APS) designed explicitly for bipolar DC grids, utilizing a flyback topology for robust and efficient operation. Central to our design is a high-voltage 3300 V silicon carbide (SiC) MOSFET and a planar transformer comprising one primary, one auxiliary, and two secondary windings. This APS uniquely addresses the resilience requirements of bipolar grids by enabling seamless switching between poles in the event of a pole failure, thus maintaining continuous power supply. Control is achieved through the UC3844A integrated circuit from Texas Instruments. The converter's effectiveness is demonstrated through experimental validations, confirming its suitability for advanced bipolar DC grid applications.

In the production of green hydrogen, electrolyzers draw power from renewable energy sources. In this paper, the design of Solid State Transformer (SST) for large-scale H ₂ electrolyzers is benchmarked. The three most promising topologies are chosen for design and comparison, including Modular Multi-level Converter (MMC) based SST, Modular Multi-level Resonant (MMR) based SST, and Input-Series-Output-Parallel (ISOP) based SST. The distance between converter towers for insulation and maintenance, the insulation system of the transformer, and the cooling system are designed with practical considerations in order to have an accurate estimation of the volume and weight of the SST. Losses in the switches are calculated based on equations, and losses in passive components are calculated based on FEM simulation. The operating frequency for each topology is optimized to minimize loss, weight, and volume. The best of each topology is then compared with each other to identify the most suitable one for large-scale H ₂ electrolyzers.

The communication network used in distributed sec-ondary control (DSC) for microgrid power and voltage regulation is vulnerable to cyber-attacks. Unlike the predominantly resilient research on secondary control, which tends to employ passive defense strategies, this paper presents a proactive defense mecha-nism to design a resilient network for microgrid secure operation. This proposed method involves preparing the resilient scheme before attacks occur and facilitates timely resilience during an attack. First, novel metrics are introduced to effectively quantify the impact of various cyber attacks. Then, a multiobjective optimization method is applied to design the communication graph considering the quantified attacks, convergence, time-delay robustness, and communication cost. Simulations are performed on a microgrid consisting of 10 inverter units under different scenarios to validate the effectiveness of the proposed methodology.

This paper concerns the control problem of the active and harmonic power sharing caused by the mismatched impedance in resistive feeders-dominated microgrids. A distributed model predictive control (DMPC) scheme is suggested to regulate the virtual impedance of each involved unit for power sharing based on the neighbor's state. With the distributed philosophy, the central controller is not required. Moreover, the proposed method benefits resilience to communication failure by designing the communication matrix. Furthermore, it involves propagating information among units in a short period, significantly reducing the communication and computation burden. Finally, the performance of the proposed control scheme is evaluated in terms of its convergence, robustness to communication delay and load variations, resilience to communication failure, and plug-and-play functionality without communication in an inverter-connected system.

Resonant converters are popular in power electronics due to their soft-switching capabilities, which enhance efficiency and prolong component lifetime. Three- phase resonant converters are particularly noteworthy for their higher power density and reduced ripple, making them ideal for demanding applications. A critical aspect of optimizing three-phase LLC resonant converters is the design of a transformer with adequate leakage inductance required for the resonance circuit. This paper compares two distinct transformer designs for such converters: a five-limb shell-type transformer and a symmetrical triangular transformer. Both designs are evaluated in terms of their performance, efficiency, and suitability for integration into the converter architecture. A detailed design procedure using Finite Element Method (FEM) analysis is presented to guide the development of these transformers. The practicality of this approach and its effectiveness are demonstrated through the implementation of a 3.4 kV to 60 V, 50 kVA prototype. This work provides a comparative analysis of transformer designs and introduces a validated methodology for improving the performance of three-phase LLC resonant converters through optimized transformer design.

Communication-based distributed secondary control is deemed necessary to restore the state of islanding AC microgrids to set points. As its limited global information, the microgrids become vulnerable to cyber-attacks, which by falsifying the communicating singles, like the angular frequency, can disturb the power dispatch in the microgrids or even induce blackout by pushing the microgrids beyond the safe operation area and triggering the protection. To make the microgrids more cyber secure, adaptive resilient control for the secondary frequency regulation is proposed. It assumes that each converter is communicating with its adjacent converters. With the proposed control, the weight of the communication channel being attacked is automatically reduced, and the more the communicating signals are falsified, the further the weight of that communication channel is weakened. The proposed approach does not rely on attack detection and thereby is easy to implement; Besides, it still works when challenged by a combination of multi-attack signals; Moreover, it applies to multiple communication lines getting attacked cases. Finally, the effectiveness and feasibility of the proposed resilient control scheme are validated by both simulations and experimental results.

Balancing converters play a pivotal role in bipolar dc grids, and while numerous topologies have been explored, many suffer from drawbacks, such as reliance on bulky passive components, limited soft-switching capabilities, or complex control mechanisms. This article introduces an LC series-resonant balancing converter topology that addresses these issues, featuring smaller passive components, the ability to achieve soft switching across its entire operational range, and simplified control with proper design. By operating in the capacitive region, the converter ensures soft switching for the complete load range, enabling all switches to achieve zero voltage switching (ZVS) turn on. The study reveals that the converter's power flow depends on both the switching frequency (fsw) and the phase shift angle (φ), but notably, when the resonant inductor value is kept sufficiently low, fsw and φ become decoupled, simplifying power flow control. In addition, this article provides detailed design guidelines for the converter's resonant tank and validates the operation and control of the converter through an experimental setup.