Current monolithic quantum computer architectures have limited scalability. One promising approach for scaling them up is to use a modular or multi-core architecture, in which different quantum processors (cores) are connected via quantum and classical links. This new architectural design poses new challenges such as the expensive inter-core communication. To reduce these movements when executing a quantum algorithm, an efficient mapping technique is required. In this paper, a detailed critical discussion of the quantum circuit mapping problem for multi-core quantum computing architectures is provided. In addition, we further explore the performance of a mapping method, which is formulated as a partitioning over time graph problem, by performing an architectural scalability analysis.

Artificial neural networks are becoming an integral part of digital solutions to complex problems. However, employing neural networks on quantum processors faces challenges related to the implementation of non-linear functions using quantum circuits. In this paper, we use repeat-until-success circuits enabled by real-time control-flow feedback to realize quantum neurons with non-linear activation functions. These neurons constitute elementary building blocks that can be arranged in a variety of layouts to carry out deep learning tasks quantum coherently. As an example, we construct a minimal feedforward quantum neural network capable of learning all 2-to-1-bit Boolean functions by optimization of network activation parameters within the supervised-learning paradigm. This model is shown to perform non-linear classification and effectively learns from multiple copies of a single training state consisting of the maximal superposition of all inputs.

Modular quantum computing architectures are a promising alternative to monolithic QPU (Quantum Processing Unit) designs for scaling up quantum devices. They refer to a set of interconnected QPUs or cores consisting of tightly coupled quantum bits that can communicate via quantum-coherent and classical links. In multi-core architectures, it is crucial to minimize the amount of communication between cores when executing an algorithm. Therefore, mapping a quantum circuit onto a modular architecture involves finding an optimal assignment of logical qubits (qubits in the quantum circuit) to different cores with the aim to minimize the number of expensive inter-core operations while adhering to given hardware constraints. In this paper, we propose for the first time a Quadratic Unconstrained Binary Optimization (QUBO) technique to encode the problem and the solution for both qubit allocation and inter-core communication costs in binary decision variables. To this end, the quantum circuit is split into slices, and qubit assignment is formulated as a graph partitioning problem for each circuit slice. The costly inter-core communication is reduced by penalizing inter-core qubit communications. The final solution is obtained by minimizing the overall cost across all circuit slices. To evaluate the effectiveness of our approach, we conduct a detailed analysis using a representative set of benchmarks having a high number of qubits on two different multi-core architectures. Our method showed promising results and performed exceptionally well with very dense and highly-parallelized circuits that require on average 0.78 inter-core communications per two-qubit gate.

With the potential of quantum algorithms to solve intractable classical problems, quantum computing is rapidly evolving, and more algorithms are being developed and optimized. Expressing these quantum algorithms using a high-level language and making them executable on a quantum processor while abstracting away hardware details is a challenging task. First, a quantum programming language should provide an intuitive programming interface to describe those algorithms. Then a compiler has to transform the program into a quantum circuit, optimize it, and map it to the target quantum processor respecting the hardware constraints such as the supported quantum operations, the qubit connectivity, and the control electronics limitations. In this article, we propose a quantum programming framework named OpenQL, which includes a high-level quantum programming language and its associated quantum compiler. We present the programming interface of OpenQL, we describe the different layers of the compiler and how we can provide portability over different qubit technologies. Our experiments show that OpenQL allows the execution of the same high-level algorithm on two different qubit technologies, namely superconducting qubits and Si-Spin qubits. Besides the executable code, OpenQL also produces an intermediate quantum assembly code, which is technology independent and can be simulated using the QX simulator.

Quantum many-core processors are envisioned as the ultimate solution for the scalability of quantum computers. Based upon Noisy Intermediate-Scale Quantum (NISQ) chips interconnected in a sort of quantum intranet, they enable large algorithms to be executed on current and close future technology. In order to optimize such architectures, it is crucial to develop tools that allow specific design space explorations. To this aim, in this paper we present a technique to perform a spatio-temporal characterization of quantum circuits running in multi-chip quantum computers. Specifically, we focus on the analysis of the qubit traffic resulting from operations that involve qubits residing in different cores, and hence quantum communication across chips, while also giving importance to the amount of intra-core operations that occur in between those communications. Using specific multi-core performance metrics and a complete set of benchmarks, our analysis showcases the opportunities that the proposed approach may provide to guide the design of multi-core quantum computers and their interconnects.

Quantum algorithms need to be compiled to respect the constraints imposed by quantum processors, which is known as the mapping problem. The mapping procedure will result in an increase of the number of gates and of the circuit latency, decreasing the algorithm's success rate. It is crucial to minimize mapping overhead, especially for noisy intermediate-scale quantum (NISQ) processors that have relatively short qubit coherence times and high gate error rates. Most of prior mapping algorithms have only considered constraints, such as the primitive gate set and qubit connectivity, but the actual gate duration and the restrictions imposed by the use of shared classical control electronics have not been taken into account. In this article, we present a mapper called Qmap to make quantum circuits executable on scalable processors with the objective of achieving the shortest circuit latency. In particular, we propose an approach to formulate the classical control restrictions as resource constraints in a conventional list scheduler with polynomial complexity. Furthermore, we implement a routing heuristic to cope with the connectivity limitation. This router finds a set of movement operations that minimally extends circuit latency. To analyze the mapping overhead and evaluate the performance of different mappers, we map 56 quantum benchmarks onto a superconducting processor named Surface-17. Compared to a prior mapping strategy that minimizes the number of operations, Qmap can reduce the latency overhead (LtyOH) up to 47.3% and operation overhead up to 28.6%, respectively.

In the quest of large-scale quantum computers, multi-core distributed architectures are considered a compelling alternative to be explored. A crucial aspect in such approach is the stringent demand on communication among cores when qubits need to interact, which conditions the scalability potential of these architectures. In this work, we address the question of how the cost of the communication among cores impacts on the viability of the quantum multi-core approach. Methodologically, we consider a design space in which architectural variables (number of cores, number of qubits per core), application variables for several quantum benchmarks (number of qubits, number of gates, percentage of two-qubit gates) and inter-core communication latency are swept along with the definition of a figure of merit. This approach yields both a qualitative understanding of trends in the design space and companion dimensioning guidelines for the architecture, including optimal points, as well as quantitative answers to the question of beyond which communication performance levels the multi-core architecture pays off. Our results allow to determine the thresholds for inter-core communication latency in order for multi-core architectures to outperform single-core quantum processors.

Despite its tremendous potential, it is still unclear how quantum computing will scale to satisfy the requirements of its most powerful applications. Among other issues, there are hard limits to the number of qubits that can be integrated into a single chip. Multicore architectures are a firm candidate for unlocking the scalability of quantum processors. Nonetheless, the vulnerability and complexity of quantum communications make this a challenging approach. A comprehensive design should imply consolidating the communications stack in the quantum computer architecture. In this article, we explain how this vision, by entangling communications and computation in the core of the design, may help to solve the open challenges. We also summarize the first results of our application of structured design methodologies backing this vision. With our work, we hope to contribute with design guidelines that may help unleash the potential of quantum computing.

A widely-used quantum programming paradigm comprises of both the data flow and control flow. Existing quantum hardware cannot well support the control flow, significantly limiting the range of quantum software executable on the hardware. By analyzing the constraints in the control microarchitecture, we found that existing quantum assembly languages are either too high-level or too restricted to support comprehensive flow control on the hardware. Also, as observed with the quantum microinstruction set QuMIS [1], the quantum instruction set architecture (QISA) design may suffer from limited scalability and flexibility because of microarchitectural constraints. It is an open challenge to design a scalable and flexible QISA which provides a comprehensive abstraction of the quantum hardware. In this paper, we propose an executable QISA, called eQASM, that can be translated from quantum assembly language (QASM), supports comprehensive quantum program flow control, and is executed on a quantum control microarchitecture. With efficient timing specification, single-operationmultiple-qubit execution, and a very-long-instruction-word architecture, eQASM presents better scalability than QuMIS. The definition of eQASM focuses on the assembly level to be expressive. Quantum operations are configured at compile time instead of being defined at QISA design time. We instantiate eQASM into a 32-bit instruction set targeting a seven-qubit superconducting quantum processor. We validate our design by performing several experiments on a two-qubit quantum processor.

Modern computer applications usually consist of a variety of components that often require quite different computational co-processors. Some examples of such co-processors are TPUs, GPUs or FPGAs. A more recent and promising technology that is being investigated is quantum co-processors. In this paper, we present a modern computer architecture where a quantum co-processor is included as an additional accelerator. In such an environment, the idea is to execute the application on a heterogeneous architecture where the classic processor will execute the host part, but certain components will be mapped, in our case, on the quantum accelerator. To this purpose, we define the distinct layers for the quantum computer architecture where there is a clear boundary between the host program and quantum kernel(s). We also discuss the opportunities and challenges of mapping hybrid algorithms to such a heterogeneous quantum computer architecture.

This article proposes a quantum microarchitecture, QuMA. Flexible programmability of a quantum processor is achieved by multilevel instructions decoding, abstracting analog control into digital control, and translating instruction execution with non-deterministic timing into event trigger with precise timing. QuMA is validated by several single-qubit experiments on a superconducting qubit.

Quantum computers promise to solve certain problems that are intractable for classical computers, such as factoring large numbers and simulating quantum systems. To date, research in quantum computer engineering has focused primarily at opposite ends of the required system stack: devising high-level programming languages and compilers to describe and optimize quantum algorithms, and building reliable low-level quantum hardware. Relatively little attention has been given to using the compiler output to fully control the operations on experimental quantum processors. Bridging this gap, we propose and build a prototype of a flexible control microarchitecture supporting quantum-classical mixed code for a superconducting quantum processor. The microarchitecture is based on three core elements: (i) a codeword-based event control scheme, (ii) queue-based precise event timing control, and (iii) a flexible multilevel instruction decoding mechanism for control. We design a set of quantum microinstructions that allows flexible control of quantum operations with precise timing. We demonstrate the microarchitecture and microinstruction set by performing a standard gate-characterization experiment on a transmon qubit.