Power control of flexible loads will play a significant role in energy transition. This work has developed a mixed-integer linear power control (MILP) model that manages electric vehicle (EV) chargers, heat pumps (HPs), and PV rooftops. The power control was tested with and without vehicle-to-grid (V2G) capabilities in different grid types, namely residential, commercial, and mixed grids. Moreover, the effect of different seasons and charger efficiencies was investigated. It was shown that grid characteristics such as EV parking times and building occupations can affect significantly the power control, e.g. the amount of imported and V2G power. Moreover, while V2G power is rarely used due to current V2G round-trip efficiency, future efficiency improvement can lead to a significant increase in V2G use. Finally, the seasonal effect had also a significant impact with Summer being characterized by higher exported and lower imported energy due to the high and prolonged PV power availability.

The large Electric Vehicle (EV) fleet penetrations can provoke several grid impact issues if no EV smart-charging is implemented. However, many EV smart-charging works assume an accurate prediction of input data, such as the EV driving patterns, which are highly uncertain. This paper addresses the impact and potential management of several uncertainties related to EV smart charging, such as photovoltaic (PV) generation, load demand, arrival state-of-charge (SOC), requested energy, and arrival and departure time of the EVs. The application of different levels of uncertainty budgets is proposed to account for the gradual impact of every uncertainty on smart charging performance. Moreover, potential uncertainty management is investigated with the use of robust optimization (RO) in predictive receding-horizon EV smart charging under the worst-case uncertainty level, and the ''price of robustness"is calculated. The results show that the EV driving uncertainties are more hazardous for the provided charging energy. In contrast, PV generation and load demand uncertainties have a significant impact mostly on the charging cost. Moreover, the price of robustness is very low for EV charging under every uncertainty case.

The rising demand for electric vehicles (EVs) in the face of limited grid capacity encourages the development and implementation of smart charging (SC) algorithms. Experimental validation plays a pivotal role in advancing this field. This article formulates a hierarchical mixed integer programming EV SC algorithm designed for low voltage (LV) distribution grid applications. A flexible receding horizon scheme is introduced in response to system uncertainties. It also considers the practical constraints in protocols, such as IEC/ISO 15118 and IEC 61851-1. The proposed algorithm is verified and assessed in a power hardware-in-the-loop testbed that incorporates models of real LV distribution grids. Furthermore, the algorithm's capabilities are examined through eight scenarios, out of which four focus on the uncertainties of the input data and two address the engagement of extra grid capacity restrictions. The results demonstrate that the SC algorithm adequately lowers the EV charging cost while fulfilling the charging demand, and substantially reduces the peak power as well as the overloading duration, even when faced with input data uncertainty. The additional grid restrictions in place are proven to improve peak demand reduction and overloading mitigation further. Finally, the limitations and potentials of the developed algorithm are scrutinized.

Low Carbon Technologies (LCTs), such as Photovoltaics (PVs), Electric Vehicles (EVs), and Heat Pumps (HPs), are expected to cause a huge electric load in future distribution grids. This paper investigates the grid impact in terms of over-loading and nodal voltage deviations in different distribution grids due to increasing LCT penetrations. The major objectives are the identification of the most severe LCT, grid impact issue, seasonal effect, and vulnerable distributional area, considering the physical models of the LCTs. It is concluded that Winter is the most hazardous for the future grid impact, characterized by nearly 3 times higher over-loading and 2.5 times higher voltage deviations during high HP penetrations, while suburban areas are the most vulnerable. Moreover, while HPs seem to have, in general, a greater impact compared to EVs, EVs cause more prolonged violations. While this work follows a bottom-up approach, using detailed physical models, aggregated national data has also been acquired, which is often used by top-down approaches. Different grid impact issues have been compared for the two approaches in terms of magnitude and duration. While bottom-up approaches generate more pessimistic results regarding the magnitude of the violations, results about the duration of the violations can be contradictory.

In this paper, the impact of Electric Vehicle (EV) uncontrolled charging with four levels of EV penetration in overall 21 real low voltage distribution grids in two seasons are analysed. The employed real grid data is provided by distribution system operators from three European countries: Austria, Germany and the Netherlands. At least six grids in each country were considered and they are categorised into three types, namely rural grids, suburban grids and urban grids. The EV charging data used in this study is based on real measurements or surveys. The seasonal and the weekday-weekend factors are also considered in the EV charging impact research. Three key congestion indicators, the transformer loading, line loading and node voltage as well as several other evaluation indexes are studied. The results reveal that the majority of the simulated grids had no or minor moments of mild overloading while the rest grids had critical issues. Among all the grids, suburban grids are most vulnerable to massive EV integration. Out of the evaluated grids, those who are located in Germany have the highest redundancy for high EV penetration accommodation. Overall, the impact of uncontrolled EV charging depends on the combination of EV charging demand as well as the grid inherent features.

The past few years have seen strong growth of solar-based off-grid energy solutions such as Solar Home Systems (SHS) as a means to ameliorate the grave problem of energy poverty. Battery storage is an essential component of SHS. An accurate battery model can play a vital role in SHS design. Knowing the dynamic behaviour of the battery is important for the battery sizing and estimating the battery behaviour for the chosen application at the system design stage. In this paper, an accurate cell level dynamic battery model based on the electrical equivalent circuit is constructed for two battery technologies: the valve regulated lead-acid (VRLA) battery and the LiFePO₄ (LFP) battery. Series of experiments were performed to obtain the relevant model parameters. This model is built for low C-rate applications (lower than 0.5 C-rate) as expected in SHS. The model considers the non-linear relation between the state of charge (SOC) and open circuit voltage (V_OC) for both technologies. Additionally, the equivalent electrical circuit model for the VRLA battery was improved by including a 2nd order RC pair. The simulated model differs from the experimentally obtained result by less than 2%. This cell level battery model can be potentially scaled to battery pack level with flexible capacity, making the dynamic battery model a useful tool in SHS design.