Monolithic perovskite/c-Si tandem solar cells have attracted enormous research attention and have achieved efficiencies above 30%. This work describes the development of monolithic tandem solar cells based on silicon heterojunction (SHJ) bottom- and perovskite top-cells and highlights light management techniques assisted by optical simulation. We first engineered (i)a-Si:H passivating layers for (100)-oriented flat c-Si surfaces and combined them with various (n)a-Si:H, (n)nc-Si:H, and (n)nc-SiOx:H interfacial layers for SHJ bottom-cells. In a symmetrical configuration, a long minority carrier lifetime of 16.9 ms was achieved when combining (i)a-Si:H bilayers with (n)nc-Si:H (extracted at the minority carrier density of 1015 cm-3). The perovskite sub-cell uses a photostable mixed-halide composition and surface passivation strategies to minimize energetic losses at charge-transport interfaces. This allows tandem efficiencies above 23% (a maximum of 24.6%) to be achieved using all three types of (n)-layers. Observations from experimentally prepared devices and optical simulations indicate that both (n)nc-SiOx:H and (n)nc-Si:H are promising for use in high-efficiency tandem solar cells. This is possible due to minimized reflection at the interfaces between the perovskite and SHJ sub-cells by optimized interference effects, demonstrating the applicability of such light management techniques to various tandem structures.

Solar-assisted water electrolysis is a promising technology for storing the energy of incident solar irradiation into hydrogen as a fuel. Here, an integrated continuous flow electrochemical reactor coupled to a monolithic perovskite-silicon tandem solar cell is demonstrated that provides light-driven electrochemical solar-to-hydrogen conversion with an energy conversion efficiency exceeding 21% at 1-Sun equivalent light intensity and stable operation during three simulated day-night cycles.

Solution-processed quasi-2D perovskites are promising for stable and efficient solar cells because of their superior environmental stability compared to 3D perovskites and tunable optoelectronic properties. Changing the number of inorganic layers (n) sandwiched between the organic spacers allows for tuning of the bandgap. However, narrowing the phase distribution around a specific n-value is a challenge. In-situ UV–vis–NIR absorption spectroscopy is used to time-resolve the crystallization dynamics of quasi-2D butylammonium-based (BA) perovskites with <n> = 4, processed from N,N-dimethylformamide (DMF) in the presence of different co-solvents. By combining with photoluminescence, transient absorption, and grazing-incidence wide-angle X-ray scattering, the crystallization is correlated to the distribution of phases with different n-values. Infrared spectroscopy and density functional theory reveal that the phase distribution correlates with perovskite precursor—co-solvent interaction energies and that stronger interactions shift the phase distribution towards smaller n-values. Careful tuning of the solvent/co-solvent ratio provides a more homogeneous phase distribution, with highly oriented perovskite crystals and suppressed formation of n = 1–2 phases, providing a power conversion efficiency for BA₂MA₃Pb₄I₁₃ solar cells that increases from 3.5% when processed from DMF to over 11% and 10% when processed from DMF/dimethyl sulfoxide and DMF/N-methyl-2-pyrrolidone mixtures, respectively.