RU

R.F. Ubbink

info

Please Note

12 records found

Charge transfer between quantum dots (QDs) and redox molecules is not well described by the Marcus theory, the hall-mark theory for charge transfer in molecular systems. The Marcus inverted region, where the rate decreases with increasing the free energy difference, has never been observed in QDs. The previously reported hypothesis for the absence of the Marcus inverted region in QDs is an Auger-assisted charge transfer pathway, which we refer to as the "Auger hypothesis". Here, we show that the Auger hypothesis does not hold to experimental tests. We measured the rate constants for two processes where Auger is either allowed or not: charge separation and charge recombination. We used ultrafast transient absorption spectroscopy to probe the rate of charge separation and recombination between PbS QDs and ferrocene derivatives ligands bound to their surface. We find that the rate constant for both charge separation and recombination increases by increasing the free energy difference, is temperature-independent, and increases with the number of molecular acceptors. All these results are against theoretical predictions for an Auger-assisted charge transfer pathway. ...
Indium phosphide (InP) quantum dots (QDs) are promising heavy-metal-free materials for optoelectronics, but their redox stability, trap-state landscape, and charge carrier dynamics are not well understood. Here we investigate InP and InP/ZnSe/ZnS QD films with different ligands by using spectroelectrochemistry. For both core-only and core/shell/shell QD films, the absorption spectra remain unchanged during charging, indicating that injected charges do not populate the conduction or valence bands. InP/ZnSe/ZnS QD films with original ligands exhibit reversible photoluminescence (PL) modulation: an increase at modest cathodic potentials, followed by quenching at more negative potentials. Solid-state ligand exchange using ethylenediamine (2DA) and sodium sulfide (Na2S) enhances conductivity and induces stronger PL changes at both cathodic and anodic potentials. These results are in line with the population of electron traps at modest cathodic potentials (i.e., near the midbandgap), suppressing nonradiative recombination and increasing the PL. At more negative potentials, electrochemical reactions of surface species result in new trap states quenching the PL. Our findings provide insights into the stability and trap-state-mediated carrier dynamics during electrochemical charging of InP-based QDs. ...
Journal article (2026) - Raimon Terricabres-Polo, Reinout F. Ubbink, Erik Betz-Güttner, Freddy T. Rabouw, Arjan J. Houtepen, Celso de Mello Donega
Indium phosphide-based quantum dots (QDs) are leading Cd- and Pb-free alternatives for photonic applications spanning 400–920 nm. However, their long-term photostability under prolonged illumination remains poorly understood. In this study, we systematically investigate the optical response of colloidal InP/ZnSe/ZnS core/shell/shell QDs exposed to white light under a dynamic inert atmosphere (glovebox filled with circulating N2 with O2 < 0.1 ppm, H2O < 1.0 ppm). Upon illumination, the QDs exhibit irreversible photodarkening, defined as a reduction in photoluminescence quantum yield with a nearly unchanged absorption spectrum. Photodarkening shows a linear dependence on absorbed photon dose, with photoexcitation deep into the conduction band inducing it more rapidly than resonant photoexcitation. Additionally, prolonged photoexposure leads to an emission redshift and an enhanced delayed-emission component, consistent with the selective photodarkening of individual QDs. Experiments in air and controlled humidity (10% and 90% relative humidity) indicate that photodarkening primarily arises from photooxidation by oxygen, whereas water promotes QD photoetching. This is further corroborated by control experiments in which the QDs are illuminated under dry oxygen (<3 ppm of H2O) and in a cuvette sealed by fusion under a N2 atmosphere with <0.1 ppm of O2 and <1 ppm of H2O. These experiments show that photodarkening does not occur in QDs contained in the fusion-sealed cuvette, while under dry oxygen the photodarkening rates of the QDs are even faster than in dry air. These findings advance understanding of InP-based QD photodegradation and provide a framework for quantifying their stability under light stress. ...
Journal article (2025) - R.F. Ubbink, Tom Speelman, Daniel Arenas Esteban, M. van Leeuwen, M. Stam, Sara Bals, Gilles A. De Wijs, Ernst R H van Eck, A.J. Houtepen
InP/ZnSe/ZnS core/shell/shell quantum dots are the most investigated quantum dot material for commercial applications involving visible light emission. The inner InP/ZnSe interface is complex since it is not charge balanced, and the InP surface is prone to oxidation. The role of oxidative defects at this interface has remained a topic of debate, with conflicting reports of both detrimental and beneficial effects on the quantum dot properties. In this study we probe the structure of the InP/ZnSe interface at the atomic level using 31P, 77Se and 17O ssNMR and HAADF-STEM. We observe clear differences in Se NMR spectra and crystal orientation of core and shell when the InP/ZnSe is oxidized on purpose. High levels of interface oxidation result in an amorphous phosphate layer at the interface, which inhibits epitaxial growth of the ZnSe shell. ...
The efficiency of quantum dot (QD) light-emitting diodes is limited by inefficient hole injection into the valence levels of the QDs. Electrochemical doping, where mobile ions form electrical double layers (EDLs) at electrodes, offers a route to removing injection barriers. While QD light-emitting electrochemical cells (QLECs) have shown promise, prior studies relied on additional charge injection layers, complicating the study of charge injection into QDs. In this work, devices with a simple ITO/QD active layer/Al structure were fabricated using highly photoluminescent ligand-exchanged CdSe/CdS/ZnS QDs, poly(ethylene oxide), and lithium trifluoromethanesulfonate as electrolyte. We show that the dense QD films in these QLECs can be electrochemically doped, transport charges, and exhibit electroluminescence. Symmetrical cyclic voltammograms and operando photoluminescence measurements prove that these devices function as electrochemically doped LECs. Spectroelectrochemical experiments on separately n- and p-doped QD films indicate that hole injection remains the primary limitation in QLEC performance. These findings demonstrate that using EDLs to facilitate charge injection in QD light-emitting devices is promising, but significant challenges remain to be solved before electron and hole injections are balanced. ...
Electrochemical charging of films of semiconductor nanocrystals (NCs) allows precise control over their Fermi level and opens up new possibilities for use of semiconductor NCs in optoelectronic devices. Unfortunately, charges added to the semiconductor NCs are often lost due to electrochemical side reactions. In this work, we examine which loss processes can occur in electrochemically charged semiconductor NC films by comparing numerical drift-diffusion simulations with experimental data. Both reactions with impurities in the electrolyte solution, as well as reactions occurring on the surface of the nanomaterials themselves, are considered. We show that the Gerischer kinetic model can be used to accurately model the one-electron transfer between charges in the semiconductor NC and oxidant or reductant species in solution. Simulations employing the Gerischer model are in agreement with experimental results of charging of semiconductor NC films with ideal one-electron acceptors ferrocene and cobaltocene. We show that reactions of charges in the semiconductor NC film with redox species in solution are reversible when the reduction potential is in the conduction band of the semiconductor NC material but are irreversible when the reduction potential is in the band gap. Experimental charging of semiconductor NC films in the presence of oxygen is always irreversible in our system, even when the reduction potential of oxygen is in the conduction band of the semiconductor NC material. We show that the Gerischer model in combination with a coupled reversible-irreversible reaction mechanism can be used to model oxygen reduction. Finally, we model irreversible reduction reactions with the semiconductor NC material itself, such as reduction of ligands or surface ions. Simulations of semiconductor NC cyclic voltammograms in the presence of material reduction reactions strongly resemble experimental cyclic voltammograms of InP and CdSe NC films. This marks material reduction reactions at the semiconductor NC surface as a likely candidate for the irreversible behavior of these materials in electrochemical experiments. These results show that all reduction reactions with redox potentials in the band gap of semiconductor NCs must be suppressed in order to achieve stable charging of these materials. ...

Investigations into quantum dots as phosphors and in light-emitting electrochemical cells

Doctoral thesis (2025) - R.F. Ubbink, A.J. Houtepen, T.J. Savenije
Semiconductor nanocrystals, known as quantum dots (QDs), have unique optical
properties that makes them useful for application in various light-emitting devices, such
as LEDs, displays and lasers. For actual application of QDs, energy efficiency of their light
emission and material stability are crucial. To achieve high energy efficiency, it must be
understood which types of atomic defects on the nanocrystals lead to energy losses and
how to prevent them. To achieve stable QDs, it is important to understand which kinds of
chemical reactions the QDs can undergo, if these reactions lead to the formation of new
defects and how to prevent this... ...
Journal article (2024) - Maarten Stam, Guilherme Almeida, Reinout F. Ubbink, Lara M. van der Poll, Yan B. Vogel, Hua Chen, Luca Giordano, Pieter Schiettecatte, Zeger Hens, Arjan J. Houtepen
Indium phosphide (InP) quantum dots (QDs) are considered the most promising alternative for Cd and Pb-based QDs for lighting and display applications. However, while core-only QDs of CdSe and CdTe have been prepared with near-unity photoluminescence quantum yield (PLQY), this is not yet achieved for InP QDs. Treatments with HF have been used to boost the PLQY of InP core-only QDs up to 85%. However, HF etches the QDs, causing loss of material and broadening of the optical features. Here, we present a simple postsynthesis HF-free treatment that is based on passivating the surface of the InP QDs with InF3. For optimized conditions, this results in a PLQY as high as 93% and nearly monoexponential photoluminescence decay. Etching of the particle surface is entirely avoided if the treatment is performed under stringent acid-free conditions. We show that this treatment is applicable to InP QDs with various sizes and InP QDs obtained via different synthesis routes. The optical properties of the resulting core-only InP QDs are on par with InP/ZnSe/ZnS core-shell QDs, with significantly higher absorption coefficients in the blue, and with potential for faster charge transport. These are important advantages when considering InP QDs for use in micro-LEDs or photodetectors. ...
Journal article (2024) - Yan B. Vogel, Le Nhan Pham, Maarten Stam, Reinout F. Ubbink, Michelle L. Coote, Arjan J. Houtepen
The optoelectronic properties of colloidal quantum dots (cQDs) depend critically on the absolute energy of the conduction and valence band edges. It is well known these band-edge energies are sensitive to the ligands on the cQD surface, but it is much less clear how they depend on other experimental conditions, like solvation. Here, we experimentally determine the band-edge positions of thin films of PbS and ZnO cQDs via spectroelectrochemical measurements. To achieve this, we first carefully evaluate and optimize the electrochemical injection of electrons and holes into PbS cQDs. This results in electrochemically fully reversible electron injection with >8 electrons per PbS cQDs, allowing the quantitative determination of the conduction band energy for PbS cQDs with various diameters and surface compositions. Surprisingly, we find that the band-edge energies shift by nearly 1 eV in the presence of different solvents, a result that also holds true for ZnO cQDs. We argue that complexation and partial charge transfer between solvent and surface ions are responsible for this large effect of the solvent on the band-edge energy. The trend in the energy shift matches the results of density functional theory (DFT) calculations in explicit solvents and scales with the energy of complexation between surface cations and solvents. As a first approximation, the solvent Lewis basicity can be used as a good descriptor to predict the shift of the conduction and valence band edges of solvated cQDs. ...
Electrochemical charging of nanocrystal films opens up new possibilities for designing quantum dot-based device structures, but a solid theoretical framework of this process and its limitations is lacking. In this work, drift-diffusion simulations are employed to model the charging of nanocrystal films and gain insight into the electrochemical doping process. Through steady state simulations it is shown that the Fermi level and doping density in the nanocrystal film depend on the concentration of the electrolyte in addition to the value of the applied potential. Time-resolved simulations reveal that charging is often limited by transport of electrolyte ions. However, ion transport in the film is dominated by drift, rather than diffusion, and the concentration profile of ions differs substantially from concentration profiles of diffusing redox species at flat electrodes. Classical electrochemical theory cannot be used to model this type of mass transport limited behavior in films of nanocrystals, so a new model is developed. We show that the Randles-Ševčík equation, which is derived for electrochemical species diffusing in solution, but is often applied to films as well, results in a significant underestimation of the diffusion coefficients of the charge compensating electrolyte ions. ...
Owing to their tunable band gap, high absorption coefficient, narrow emission linewidths and unrestricted composition, InP-based colloidal quantum dots (QDs) have become industrially relevant for visible and near-infrared photonic technologies. Although their development has so far been strongly driven by their suitability for green and red light-emitting diodes, the spectrum of applications for this class of materials is much broader. This Review covers the multidisciplinary field of InP-based QDs from its genesis in the mid-1990s to date, drawing on relevant knowledge from other classes of QDs and from III–V semiconductors as a whole. We discuss the optoelectronic properties of InP QDs, their fabrication, their defects and passivation strategies and the design of InP-based QD heterostructures. Finally, we outline the technological status of these QDs for various photonic applications. ...
Indium phosphide quantum dots are the main alternative for toxic and restricted Cd-based quantum dots for lighting and display applications, but in the absence of protecting ZnSe and/or ZnS shells, InP quantum dots suffer from low photoluminescence quantum yields. Traditionally, HF treatments have been used to improve the quantum yield of InP to ~50%, but these treatments are dangerous and not well understood. Here, we develop a postsynthetic treatment that forms HF in situ from benzoyl fluoride, which can be used to strongly increase the quantum yield of InP core-only quantum dots. This treatment is water-free and can be performed safely. Simultaneous addition of the z-type ligand ZnCl2 increases the photoluminescence quantum yield up to 85%. Structural analysis via XPS as well as solid state and solution NMR measurements shows that the in situ generated HF leads to a surface passivation by indium fluoride z-type ligands and removes polyphosphates, but not PO3 and PO4 species from the InP surface. With DFT calculations it is shown that InP QDs can be trap-free even when PO3 and PO4 species are present on the surface. These results show that both polyphosphate removal and z-type passivation are necessary to obtain high quantum yields in InP core-only quantum dots. They further show that core-only InP QDs can achieve photoluminescence quantum yields rivalling those of InP/ZnSe/ZnS core/shell/shell QDs and the best core-only II-VI QDs. ...