This paper presents a novel approach integrating motion replanning, path tracking and vehicle stability for collision avoidance using nonlinear Model Predictive Contouring Control. Employing torque vectoring capabilities, the proposed controller is able to stabilise the vehicle in evasive manoeuvres at the limit of handling. A nonlinear double-track vehicle model, together with an extended Fiala tyre model, is used to capture the nonlinear coupled longitudinal and lateral dynamics. The optimised control inputs are the steering angle and the four longitudinal wheel forces to minimise the tracking error in safe situations and maximise the vehicle-to-obstacle distance in emergency manoeuvres. These optimised longitudinal forces generate an additional direct yaw moment, enhancing the vehicle’s lateral agility and aiding in obstacle avoidance and stability maintenance. The longitudinal tyre forces are constrained using the tyre friction cycle. The proposed controller has been tested on rapid prototyping hardware to prove real-time capability. In a high-fidelity simulation environment validated with experimental data, our proposed approach successfully avoids obstacles and maintains vehicle stability. It outperforms two baseline controllers: one without torque vectoring and another one without collision avoidance prioritisation. Furthermore, we demonstrate the robustness of the proposed approach to vehicle parameter variations, road friction, perception, and localisation errors. The influence of each variation is statistically assessed to evaluate its impact on the performance, providing guidelines for future controller design.

We present a vehicle system capable of navigating safely and efficiently around Vulnerable Road Users (VRUs), such as pedestrians and cyclists. The system comprises key modules for environment perception, localization and mapping, motion planning, and control, integrated into a prototype vehicle. A key innovation is a motion planner based on Topology-driven Model Predictive Control (T-MPC). The guidance layer generates multiple trajectories in parallel, each representing a distinct strategy for obstacle avoidance or non-passing. The underlying trajectory optimization constrains the joint probability of collision with VRUs under generic uncertainties. To address extraordinary situations ('edge cases') that go beyond the autonomous capabilities - such as construction zones or encounters with emergency responders - the system includes an option for remote human operation, supported by visual and haptic guidance. In simulation, our motion planner outperforms three baseline approaches in terms of safety and efficiency. We also demonstrate the full system in prototype vehicle tests on a closed track, both in autonomous and remotely operated modes.

This paper proposes a novel vehicle sideslip angle estimator, which uses the physical knowledge from an Unscented Kalman Filter (UKF) based on a non-linear single-track vehicle model to enhance the estimation accuracy of a Convolutional Neural Network (CNN). The model-based and data-driven approaches interact mutually, and both use the standard inertial measurement unit and the tyre forces measured by load sensing technology. CNN benefits from the UKF the capacity to leverage the laws of physics. Concurrently, the UKF uses the CNN outputs as sideslip angle pseudo-measurement and adaptive process noise parameters. The back-propagation through time algorithm is applied end-to-end to the CNN and the UKF to employ the mutualistic property. Using a large-scale experimental dataset of 216 manoeuvres containing a great diversity of vehicle behaviours, we demonstrate a significant improvement in the accuracy of the proposed architecture over the current state-of-art hybrid approach combined with model-based and data-driven techniques. In the case that a limited dataset is provided for the training phase, the proposed hybrid approach still guarantees estimation robustness.

This paper presents an original approach to vehicle obstacle avoidance. It involves the development of a nonlinear Model Predictive Contouring Control, which uses torque vectoring to stabilise and drive the vehicle in evasive manoeuvres at the limit of handling. The proposed algorithm combines motion planning, path tracking and vehicle stability objectives, prioritising collision avoidance in emergencies. The controller's prediction model is a nonlinear double-track vehicle model based on an extended Fiala tyre to capture the nonlinear coupled longitudinal and lateral dynamics. The controller computes the optimal steering angle and the longitudinal forces per each of the four wheels to minimise tracking error in safe situations and maximise the vehicle-to-obstacle distance in emergencies. Thanks to the optimisation of the longitudinal tyre forces, the proposed controller can produce an extra yaw moment, increasing the vehicle's lateral agility to avoid obstacles while keeping the vehicle stable. The optimal forces are constrained in the tyre friction circle not to exceed the tyres and vehicle capabilities. In a high-fidelity simulation environment, we demonstrate the benefits of torque vectoring, showing that our proposed approach is capable of successfully avoiding obstacles and keeping the vehicle stable while driving a double-lane change manoeuvre, in comparison to baselines lacking torque vectoring or collision avoidance prioritisation.

This paper proposes a non-linear Model Predictive Contouring Control (MPCC) for obstacle avoidance in automated vehicles driven at the limit of handling. The proposed controller integrates motion planning, path tracking and vehicle stability objectives, prioritising obstacle avoidance in emergencies. The controller’s prediction model is a non-linear single-track vehicle model with the Fiala tyre to capture the vehicle’s non-linear behaviour. The MPCC computes the optimal steering angle and brake torques to minimise tracking error in safe situations and maximise the vehicle-to-obstacle distance in emergencies. Furthermore, the MPCC is extended with the tyre friction circle to fully exploit the vehicle’s manoeuvrability and stability. The MPCC controller is tested using real-time rapid prototyping hardware to prove its real-time capability. The performance is compared with a state-of-the-art Model Predictive Control (MPC) in a high-fidelity simulation environment. The double lane change scenario results demonstrate a significant improvement in successfully avoiding obstacles and maintaining vehicle stability.

This paper presents a novel approach to automated drifting with a standard passenger vehicle, which involves a Nonlinear Model Predictive Control to stabilise and maintain the vehicle at high sideslip angle conditions. The proposed controller architecture is split into three components. The first part consists of the offline computed equilibrium maps, which provide the equilibrium points for each vehicle state given the desired sideslip angle and radius of the path. The second is the predictive controller minimising the errors between the equilibrium and actual vehicle states. The third is a path-following controller, which reduces the path error, altering the equilibrium curvature path. In a high-fidelity simulation environment, we validate the controller architecture capacity to stabilise the vehicle in automated drifting along a desired path, with a maximal lateral path deviation of 1 m. In the experiments with a standard passenger vehicle, we demonstrate that the proposed approach is capable of bringing and maintaining the vehicle at the desired 30 deg sideslip angle in both high and low friction conditions.

This paper presents a novel Learning-based Model Predictive Contouring Control (L-MPCC) algorithm for evasive manoeuvres at the limit of handling. The algorithm uses the Student-t Process (STP) to minimise model mismatches and uncertainties online. The proposed STP captures the mismatches between the prediction model and the measured lateral tyre forces and yaw rate. The mismatches correspond to the posterior means provided to the prediction model to improve its accuracy. Simultaneously, the posterior covariances are propagated to the vehicle lateral velocity and yaw rate along the prediction horizon. The STP posterior covariance directly depends on the variance of observed data, so its variance is more significant when the online measurements differ from the recorded ones in the training set and smaller in the opposite case. Thus, these covariances can be utilised in the L-MPCC’s cost function to minimise the vehicle state uncertainties. In a high-fidelity simulation environment, we demonstrate that the proposed L-MPCC can successfully avoid obstacles, keeping the vehicle stable while driving a double lane change manoeuvre at a higher velocity than an MPCC without STP. Furthermore, the proposed controller yields a significantly lower peak sideslip angle, improving the vehicle’s manoeuvrability compared to an L-MPCC with a Gaussian Process.

This paper presents an innovative combined control using Model Predictive Control (MPC) to enhance the stability of automated vehicles. It integrates path tracking and vehicle stability control into a single controller to satisfy both objectives. The stability enhancement is achieved by computing two expected yaw rates based on the steering wheel angle and on lateral acceleration into the MPC model. The vehicle's stability is determined by comparing the two reference yaw rates to the actual one. Thus, the MPC controller prioritises path tracking or vehicle stability by actively varying the cost function weights depending on the vehicle states. Using two industrial standard manoeuvres, i.e. moose test and double lane change, we demonstrate a significant improvement in path tracking and vehicle stability of the proposed MPC over eight benchmark controllers in the high-fidelity simulation environment. The numerous benchmark controllers use different path tracking and stability control methods to assess each performance benefit. They are split into two groups: the first one uses differential braking in the control output, while the second group can only provide an equal brake torque for the wheels in the same axle. Furthermore, the controller's robustness is evaluated by changing various parameters, e.g. initial vehicle speed, mass and road friction coefficient. The proposed controller keeps the vehicle stable at higher speeds even with varying conditions.