This study covers three aspects of acoustic localisation of drones using a microphone array. First, it assesses a grid-free approach, using differential evolution, to estimate the three-dimensional position of a drone. It is found that this is indeed possible for the drone in the near-field. For larger distances, it still provides the angular position of the drone. Second, the study emphasizes the essence of localisation over small frequency bands with the bands jointly spanning a large frequency range to reveal the presence of multiple sound sources and maximise the drone localisation range. Third, it addresses the localisation ranges for six different drones.

Since every flight ends in a landing and every landing is a potential crash, deceleration during landing is one of the most critical flying maneuvers. Here we implement a recently-discovered insect visual-guided landing strategy in which the divergence of optical flow is regulated in a step-wise fashion onboard a quadrotor for the task of visual servoing. This approach was shown to be a powerful tool for understanding challenges encountered by visually-guided flying systems. We found that landing on a relatively small target requires mitigation of the noise with adaptive low-pass filtering, while compensation for the delays introduced by this filter requires open-loop forward accelerations to switch from divergence setpoint. Both implemented solutions are consistent with insect physiological properties. Our study evaluates the challenges of visual-based navigation for flying insects. It highlights the benefits and feasibility of the switching divergence strategy that allows for faster and safer landings in the context of robotics.

The real-world application of small drones is mostly hampered by energy limitations. Neuromorphic computing promises extremely energy-efficient AI for autonomous flight but is still challenging to train and deploy on real robots. To reap the maximal benefits from neuromorphic computing, it is necessary to perform all autonomy functions end-to-end on a single neuromorphic chip, from low-level attitude control to high-level navigation. This research presents the first neuromorphic control system using a spiking neural network (SNN) to effectively map a drone's raw sensory input directly to motor commands. We apply this method to low-level attitude estimation and control for a quadrotor, deploying the SNN on a tiny Crazyflie. We propose a modular SNN, separately training and then merging estimation and control sub-networks. The SNN is trained with imitation learning, using a flight dataset of sensory-motor pairs. Post-training, the network is deployed on the Crazyflie, issuing control commands from sensor inputs at 500Hz. Furthermore, for the training procedure we augmented training data by flying a controller with additional excitation and time-shifting the target data to enhance the predictive capabilities of the SNN. On the real drone, the perception-to-control SNN tracks attitude commands with an average error of 3.0 degrees, compared to 2.7 degrees for the regular flight stack. We also show the benefits of the proposed learning modifications for reducing the average tracking error and reducing oscillations. Our work shows the feasibility of performing neuromorphic end-to-end control, laying the basis for highly energy-efficient and low-latency neuromorphic autopilots.

Learning-based visual ego-motion estimation is promising yet not ready for navigating agile mobile robots in the real world. In this article, we propose CUAHN-VIO, a robust and efficient monocular visual-inertial odometry (VIO) designed for micro aerial vehicles (MAVs) equipped with a downward-facing camera. The vision frontend is a content-and-uncertainty-aware homography network (CUAHN). Content awareness measures the robustness of the network toward non-homography image content, e.g. 3-dimensional objects lying on a planar surface. Uncertainty awareness refers that the network not only predicts the homography transformation but also estimates the prediction uncertainty. The training requires no ground truth that is often difficult to obtain. The network has good generalization that enables “plug-and-play” deployment in new environments without fine-tuning. A lightweight extended Kalman filter (EKF) serves as the VIO backend and utilizes the mean prediction and variance estimation from the network for visual measurement updates. CUAHN-VIO is evaluated on a high-speed public dataset and shows rivaling accuracy to state-of-the-art (SOTA) VIO approaches. Thanks to the robustness to motion blur, low network inference time (∼23 ms), and stable processing latency (∼26 ms), CUAHN-VIO successfully runs onboard an Nvidia Jetson TX2 embedded processor to navigate a fast autonomous MAV.

Spiking neural networks (SNNs) for event-based optical flow are claimed to be computationally more efficient than their artificial neural networks (ANNs) counterparts, but a fair comparison is missing in the literature. In this work, we propose an event-based optical flow solution based on activation sparsification and a neuromorphic processor, SENECA. SENECA has an event-driven processing mechanism that can exploit the sparsity in ANN activations and SNN spikes to accelerate the inference of both types of neural networks. The ANN and the SNN for comparison have similar low activation/spike density (∼5%) thanks to our novel sparsification-aware training. In the hardware-in-loop experiments designed to deduce the average time and energy consumption, the SNN consumes 44.9ms and 927.0μJ, which are 62.5% and 75.2% of the ANN's consumption, respectively. We find that SNN's higher efficiency is attributed to its lower pixel-wise spike density (43.5% vs. 66.5%) that requires fewer memory access operations for neuron states.

This paper analyses the methods and technologies involved in flapping-wing flying robots (FWFRs), where the actuation of the flapping wing produces thrust and lift force that mimics birds’ and insects’ flight. The focus is on the evolution of the flapping-wing technology and the challenges in prototyping, modeling, navigation, and control. The mechanism for flapping production, frequency control of the flapping, and wing/tail control for positioning the robot are important topics for successful prototyping. The article includes the study of the dynamics and aerodynamics of the FWFR. Using the combination of flapping and gliding has led researchers to seek more energy savings through this hybrid-in-nature dynamic system, which benefits from the wind, a natural and free energy source. The paper reviews the dynamics, design, and categorization of flapping-wing systems; it also includes control and onboard intelligent functionalities, particularly environment perception for positioning and guidance, as well as obstacle detection and avoidance.

Neuromorphic computing shows promise for advancing computing efficiency and capabilities of AI applications using brain-inspired principles. However, the neuromorphic research field currently lacks standardized benchmarks, making it difficult to accurately measure technological advancements, compare performance with conventional methods, and identify promising future research directions. This article presents NeuroBench, a benchmark framework for neuromorphic algorithms and systems, which is collaboratively designed from an open community of researchers across industry and academia. NeuroBench introduces a common set of tools and systematic methodology for inclusive benchmark measurement, delivering an objective reference framework for quantifying neuromorphic approaches in both hardware-independent and hardware-dependent settings. For latest project updates, visit the project website (neurobench.ai).

Autonomous flight in unknown, cluttered environments is still a major challenge in robotics. Existing obstacle avoidance algorithms typically adopt a fixed flight velocity, overlooking the crucial balance between safety and agility. We propose a reinforcement learning algorithm to learn an adaptive flight speed policy tailored to varying environment complexities, enhancing obstacle avoidance safety. A downside of learning-based obstacle avoidance algorithms is that the lack of a mapping module can lead to the drone getting stuck in complex scenarios. To address this, we introduce a novel training setup for the latent space that retains memory of previous depth map observations. The latent space is explicitly trained to predict both past and current depth maps. Our findings confirm that varying speed leads to a superior balance of success rate and agility in cluttered environments. Additionally, our memory-augmented latent representation outperforms the latent representation commonly used in reinforcement learning. Furthermore, an extensive comparison of our method with the existing state-of-the-art approaches Agile-autonomy and Ego-planner shows the superior performance of our approach, especially in highly cluttered environments. Finally, after minimal fine-tuning, we successfully deployed our network on a real drone for enhanced obstacle avoidance.

Tailsitter aircraft attract considerable interest due to their capabilities of both agile hover and high speed forward flight. However, traditional tailsitters that use aerodynamic control surfaces face the challenge of limited control effectiveness and associated actuator saturation during vertical flight and transitions. Conversely, tailsitters relying solely on tilting rotors have the drawback of insufficient roll control authority in forward flight. This letter proposes a tilt-rotor tailsitter aircraft with both elevons and tilting rotors as a promising solution. By implementing a cascaded weighted least squares (WLS) based incremental nonlinear dynamic inversion (INDI) controller, the drone successfully achieved autonomous waypoint tracking in outdoor experiments at a cruise airspeed of 16 m/s, including transitions between forward flight and hover without actuator saturation. Wind tunnel experiments confirm improved roll control compared to tilt-rotor-only configurations, while comparative outdoor flight tests highlight the vehicle's superior control over elevon-only designs during critical phases such as vertical descent and transitions. Finally, we also show that the tilt-rotors allow for an autonomous takeoff and landing with a unique pivoting capability that demonstrates stability and robustness under wind disturbances.

Inspired by frame-based methods, state-of-the-art event-based optical flow networks rely on the explicit construction of correlation volumes, which are expensive to compute and store, rendering them unsuitable for robotic applications with limited compute and energy budget. Moreover, correlation volumes scale poorly with resolution, prohibiting them from estimating high-resolution flow. We observe that the spatiotemporally continuous traces of events provide a natural search direction for seeking pixel correspondences, obviating the need to rely on gradients of explicit correlation volumes as such search directions. We introduce IDNet (Iterative Deblurring Network), a lightweight yet high-performing event-based optical flow network directly estimating flow from event traces without using correlation volumes. We further propose two iterative update schemes: "ID"which iterates over the same batch of events, and "TID"which iterates over time with streaming events in an online fashion. Our top-performing model (ID) sets a new state of the art on DSEC benchmark. Meanwhile, the base model (TID) is competitive with prior arts while using 80% fewer parameters, consuming 20x less memory footprint and running 40% faster on the NVidia Jetson Xavier NX. Furthermore, the TID scheme is even more efficient offering an additional 5x faster inference speed and 8 ms ultra-low latency at the cost of only a 9% performance drop, making it the only model among current literature capable of real-time operation while maintaining decent performance.Code: https://github.com/tudelft/idnet.

Navigation is an essential capability for autonomous robots. In particular, visual navigation has been a major research topic in robotics because cameras are lightweight, power-efficient sensors that provide rich information on the environment. However, the main challenge of visual navigation is that it requires substantial computational power and memory for visual processing and storage of the results. As of yet, this has precluded its use on small, extremely resource-constrained robots such as lightweight drones. Inspired by the parsimony of natural intelligence, we propose an insect-inspired approach toward visual navigation that is specifically aimed at extremely resource-restricted robots. It is a route-following approach in which a robot's outbound trajectory is stored as a collection of highly compressed panoramic images together with their spatial relationships as measured with odometry. During the inbound journey, the robot uses a combination of odometry and visual homing to return to the stored locations, with visual homing preventing the buildup of odometric drift. A main advancement of the proposed strategy is that the number of stored compressed images is minimized by spacing them apart as far as the accuracy of odometry allows. To demonstrate the suitability for small systems, we implemented the strategy on a tiny 56-gram drone. The drone could successfully follow routes up to 100 meters with a trajectory representation that consumed less than 20 bytes per meter. The presented method forms a substantial step toward the autonomous visual navigation of tiny robots, facilitating their more widespread application.

Developing optimal controllers for aggressive high-speed quadcopter flight poses significant challenges in robotics. Recent trends in the field involve utilizing neural network controllers trained through supervised or reinforcement learning. However, the sim-to-real transfer introduces a reality gap, requiring the use of robust inner loop controllers during real flights, which limits the network's control authority and flight performance. In this paper, we investigate for the first time, an end-to-end neural network controller, addressing the reality gap issue without being restricted by an inner-loop controller. The networks, referred to as G&CNets, are trained to learn an energy-optimal policy mapping the quadcopter's state to rpm commands using an optimal trajectory dataset. In hover-to-hover flights, we identified the unmodeled moments as a significant contributor to the reality gap. To mitigate this, we propose an adaptive control strategy that works by learning from optimal trajectories of a system affected by constant external pitch, roll and yaw moments. In real test flights, this model mismatch is estimated onboard and fed to the network to obtain the optimal rpm command. We demonstrate the effectiveness of our method by performing energy-optimal hover-to-hover flights with and without moment feedback. Finally, we compare the adaptive controller to a state-of-the-art differential-flatness-based controller in a consecutive waypoint flight and demonstrate the advantages of our method in terms of energy optimality and robustness.

Accurate trajectory tracking with quadrotors is a challenging task that requires a trade-off between accuracy and complexity to run onboard. Stateof- the-art adaptive controllers achieve impressive trajectory tracking results with slight performance degradation in varying winds or payloads but at the cost of computational complexity. This work proposes a lightweight combination of adaptive and neural control and shows its performance when flying with propeller damage. The neural architecture consists of offline learning of a condition-invariant representation of the aerodynamic forces through Deep Neural Networks. The second part consists of fast online adaptation using a composite adaptation law. We deploy this flight controller fully onboard the flight controller of the Parrot Bebop 1, showcasing its computational efficiency. The adaptive neural controller improves tracking performance by ≈ 60% over the nonlinear baseline, with minimal performance degradation of just ≈ 20% with increasing propeller damage.

This paper proposes an innovative approach for optical flow-based control of micro air vehicles (MAVs), addressing challenges inherent in the nonlinearity of optical flow observables. The proposed incremental nonlinear dynamic inversion (INDI) control scheme employs an efficient data-driven approach to directly estimate the inverse of the time-varying INDI control effectiveness in real-time. This method eliminates the constant effectiveness assumption typically made by traditional INDI methods and reduces the computational burden associated with inverting this variable at each time step. It effectively handles rapidly changing system dynamics, often encountered in optical flow-based control, particularly height-dependent control variables. Stability analysis of the proposed control scheme is conducted, and its robustness and efficiency are demonstrated through both numerical simulations and real-world flight tests. These tests include multiple landings of an MAV on a static, flat surface with several different tracking setpoints, as well as hovering and landings on moving and undulating surfaces. Despite the challenges posed by noisy optical flow estimates and lateral or vertical movements of the landing surfaces, the MAV successfully tracks or lands on the surface with an exponential decay of both height and vertical velocity almost simultaneously, aligning with the desired performance.

Unmanned air vehicles (UAVs) have traditionally been considered as "eyes in the sky", that can move in three dimensions and need to avoid any contact with their environment. On the contrary, contact should not be considered as a problem, but as an opportunity to expand the range of UAVs applications. In this paper, we designed, fabricated, and characterized a whisker sensor unit based on MEMS barometers suitable for tactile localization on UAVs, featuring lightweight, low stiffness, high sensitivity, a broad sensing range, and scalability. Then, for the challenging task of contact point localization, we propose a Recurrent Multi-output Network (RMN) for predicting 3D contact points under continuous contact conditions to address the problems of non-linearity, hysteresis, and non-injective mapping between signals and contact points by considering time series. In addition, we propose an azimuth prediction loss function which reduces the RMSE by 3.24° compared to L₁ loss. Finally, we conduct experiments on a linear stage to validate the 3D contact point localization capability of the proposed whisker system and model. The results show that our localization can achieve excellent performance, with an inference time of 1.4 ms and a mean error of only 9.18 mm in Euclidean distance within 3D space, laying a robust foundation for future implementation of tactile localization on UAVs. The design files, dataset, and source code are available on: https://github.com/BioMorphic-Intelligence-Lab/Whisker-3D-Localization.

In recent years, Artificial Neural Networks (ANN) have become a standard in robotic control. However, a significant drawback of large-scale ANNs is their increased power consumption. This becomes a critical concern when designing autonomous aerial vehicles, given the stringent constraints on power and weight. Especially in the case of blimps, known for their extended endurance, power-efficient control methods are essential. Spiking neural networks (SNN) can provide a solution, facilitating energy-efficient and asynchronous eventdriven processing. In this paper, we have evolved SNNs for accurate altitude control of a non-neutrally buoyant indoor blimp, relying solely on onboard sensing and processing power. The blimp’s altitude tracking performance significantly improved compared to prior research, showing reduced oscillations and a minimal steady-state error. The parameters of the SNNs were optimized via an evolutionary algorithm, using a Proportional- Derivative-Integral (PID) controller as the target signal. We developed two complementary SNN controllers while examining various hidden layer structures. The first controller responds swiftly to control errors, mitigating overshooting and oscillations, while the second minimizes steady-state errors due to nonneutral buoyancy-induced drift. Despite the blimp’s drivetrain limitations, our SNN controllers ensured stable altitude control, employing only 160 spiking neurons.

Aggressive time-optimal control of quadcopters poses a significant challenge in the field of robotics. The state-of-the-art approach leverages reinforcement learning (RL) to train optimal neural policies. However, a critical hurdle is the sim-to-real gap, often addressed by employing a robust inner loop controller-an abstraction that, in theory, constrains the optimality of the trained controller, necessitating margins to counter potential disturbances. In contrast, our novel approach introduces high-speed quadcopter control using end-to-end RL (E2E) that gives direct motor commands. To bridge the reality gap, we incorporate a learned residual model and an adaptive method that can compensate for modeling errors in thrust and moments. We compare our E2E approach against a state-of-the-art network that commands thrust and body rates to an INDI inner loop controller, both in simulated and real-world flight. E2E showcases a significant 1.39-second advantage in simulation and a 0.17-second edge in real-world testing, highlighting end-to-end reinforcement learning's potential. The performance drop observed from simulation to reality shows potential for further improvement, including refining strategies to address the reality gap or exploring offline reinforcement learning with real flight data.

This Review discusses the main results obtained in training end-to-end neural architectures for guidance and control of interplanetary transfers, planetary landings, and close-proximity operations, highlighting the successful learning of optimality principles by the underlying neural models. Spacecraft and drones aimed at exploring our solar system are designed to operate in conditions where the smart use of onboard resources is vital to the success or failure of the mission. Sensorimotor actions are thus often derived from high-level, quantifiable, optimality principles assigned to each task, using consolidated tools in optimal control theory. The planned actions are derived on the ground and transferred on board, where controllers have the task of tracking the uploaded guidance profile. Here, we review recent trends based on the use of end-to-end networks, called guidance and control networks (G&CNets), which allow spacecraft to depart from such an architecture and to embrace the onboard computation of optimal actions. In this way, the sensor information is transformed in real time into optimal plans, thus increasing mission autonomy and robustness. We then analyze drone racing as an ideal gym environment to test these architectures on real robotic platforms and thus increase confidence in their use in future space exploration missions. Drone racing not only shares with spacecraft missions both limited onboard computational capabilities and similar control structures induced from the optimality principle sought but also entails different levels of uncertainties and unmodeled effects and a very different dynamical timescale.

ROVIO is one of the state-of-the-art monocular visual inertial odometry algorithms. It uses an Iterative Extended Kalman Filter (IEKF) to align visual features and update the vehicle state simultaneously by including the feature locations in the state vector of the IEKF. This algorithm is single-core intensive, which allows the other cores to be used for other algorithms, such as object detection and path optimization. However, the computational cost of the algorithm grows rapidly with the maximum number of features to track. Each feature adds three new states (a 2D bearing vector and inverse depth), leading to bigger matrix multiplications that are computationally expensive. The main computational load of ROVIO is the iterative update step of the IEKF. In this work, we reduce the average computational cost of ROVIO by 40% on an NVIDIA Jetson TX2, without affecting the accuracy of the algorithm. This computational gain is mainly achieved by exploiting the sparse matrices in ROVIO. Furthermore, we reduce the computational peaks by pre-selecting new features based on their already calculated FAST score. The combination of both modifications allows us to run ROVIO on the computationally restricted Raspberry Pi Zero 2W.