HB
HJL Bressers
Authored
20 records found
In order to calculate cure induced stresses, reliable material data is needed over a large modulus range. This paper concerns the derivation of correction equations needed for the interpretation of dynamic mechanical experiments on two different shear tools. For the first shear t
...
In order to establish the possible influence of residual stress and strain fields after cure on the failure prediction of electronic packages, cure-dependent viscoelastic constitutive relations for the applied polymers are required. This paper gives an overview of progress in the
...
Among various materials, polymers are widely used in microelectronics as different product constituents, such as encapsulants, conductive or non-conductive adhesives, underfills, molding compounds, insulators, dielectrics, and coatings. The behavior of these polymer constituents
...
In the electronics industry epoxy molding compounds, underfills and adhesives are used for the packaging of electronic components. These materials are applied in liquid form, cured at elevated temperatures and then cooled down to room temperature. During these processing steps re
...
In microelectronic industry, thin polymer layers are one of the more commonly used product constituents. Examples are glue layers, coatings, and dielectric layers. The thicknesses of these films vary from a few tens of nanometers to over a hundred micrometers. Since at film thick
...
Warpage is a critical issue for QFN array molding process. In this paper, a cure-dependent viscoelastic constitutive model is established to model the cure-induced warpage in array molding process. For the relaxation modulus functions of the packaging polymer , the equilibrium mo
...
Package warpage, interface delamination and thermal fatigue are the major reliability concerns for micro-electronic packages, caused by mismatch in thermal expansion together with residual stress originating from the curing process of the packaging polymers. To investigate the in
...