Increasing the operating lifetime of photovoltaic (PV) modules is a key factor in further reducing their levelized cost of electricity. Analytical degradation models typically use the external relative humidity (RH) as a stress factor, rather than the moisture concentration inside the module. This study presents a Finite Element Method (FEM) model, built in COMSOL Multiphysics, to simulate the moisture ingress inside a PV module. We explore the effects of different encapsulant and backsheet materials, as well as various climatic conditions, on moisture penetration. Overall, the impact of the climate has a larger impact on the moisture ingress than the choice of material, implying that the PV module design should be adjusted for different climates. As FEM simulations are computationally intensive, we also present an analytical model, based on empirically determined characteristics, to simulate the moisture ingress. This reconstruction can be done with a deviation lower than 0.05 for all conditions. Finally, our findings indicate that the relative moisture content (RMC) within the module serves as a more accurate stress factor than outdoor RH. Degradation rates over time found in literature are captured more accurately when deploying RMC.

At standard test conditions (STC), the performance of photovoltaic modules is compared using efficiency. As irradiance and module temperature fluctuate over the year and STC efficiency does not assess the performance of the module accurately in real world conditions, the annual energy yield is used instead as performance metric. Perovskite/silicon tandem solar cells are being massively researched and sought after in PV industry for their efficiency well above 34% with further growth perspective. In this work, to evaluate and compare performance of different perovskite/silicon tandem photovoltaic (PV) modules based on different bottom cell technologies, we use a hybrid modelling approach. Such approach, combining experimentally obtained and simulated current-voltage curves, flexibly predicts the annual energy yield of novel tandem PV modules via our PVMD toolbox and enables their optimization in any location. In particular, considering (i) mono- and bi-facial architectures, (ii) 2-terminal and 4-terminal module configurations, and (iii) silicon heterojunction or novel poly-SiOx passivated c-Si solar bottom cells, we compare the annual energy yield of different perovskite/silicon tandem modules and we optimize their performance in different locations with respect to different perovskite thickness and bandgaps

Bifacial perovskite/silicon solar cells can combine the advantages of tandem technology (high efficiencies) and bifacial modules (additional received irradiance from the rear) to increase the energy yield of photovoltaic (PV) systems further. In literature, it has already been shown that for two-terminal tandems this would require a lower bandgap energy (E_g) for the perovskite cell, as the rear irradiance increases the current in the bottom cell creating a current mismatch, if this is not considered during optimization. This work expands on bifacial two-terminal tandem optimization by considering aspects not included before. Besides the E_g, the thickness (d) of the perovskite is also optimized, as this also affects the current matching. Additionally, this work studies the trends in different energy losses of the PV module to better understand what affects the optimal perovskite cell. Our simulations show that the optimal E_g is 1.61–1.65 eV and the optimal d is 650–750 nm, which agrees with the observations in literature. The optimal E_g and d are mostly a trade-off between mismatch and thermalization losses, meaning that the mismatch losses should not be fully minimized. Additionally, the irradiance from the rear side is converted less efficiently than the front side irradiance due to larger thermalization and reflection losses. Therefore, the energy yield of bifacial tandem modules, compared to monofacial tandem ones, only increases for large ground albedo. Finally, our results show that the bifacial tandems have over a 25% gain in energy yield compared to bifacial single junction modules and up to 5% gain compared to monofacial tandem modules.

In the quest for advancing photovoltaic efficiency, the adoption of multijunction solar cell architectures has emerged as a promising approach. Perovskite/silicon double-junction solar cells have already achieved efficiencies surpassing 33%, exceeding the theoretical efficiency limit for single-junction devices. To enhance efficiency even further, exploring perovskite/perovskite/silicon (PPS) triple-junction solar cells seems a logical next step, as they offer the potential to further reduce thermalization losses and achieve even higher efficiencies. This study delves into the potential of various configurations of PPS modules, exploring different subcell interconnections. Initially, we present an optoelectrical model to simulate the performance of these devices, incorporating both luminescence coupling and cell-to-module losses. This enables us to optimize the bandgap energy of the top and middle perovskite subcells under both standard test conditions (STC) and outdoor conditions. Our analysis reveals that the addition of a perovskite subcell can improve the STC efficiency up to 9%–13%. This gain in STC performance also translates into a similar gain in energy yield, meaning that triple-junction devices produce 8%–14% more electricity than their double-junction reference devices.

Lead halide perovskites are a promising class of materials for solar cell applications. The perovskite bandgap depends on the material composition and is highly tunable. Opto-electrical device modelling is commonly used to find the optimum perovskite bandgap that maximizes device efficiency or energy yield, either in single junction or multi-junction configuration. The first step in this calculation is the optical modelling of the spectral absorptance. This requires as input the perovskite's complex refractive index N as a function of wavelength λ. The complex refractive index consists of real part n(λ) and imaginary part k(λ). For the most commonly used perovskites, n and k curves are available from spectroscopic ellipsometry measurements, but usually only for a few discrete bandgap energies. For solar cell optimization, these curves are required for a continuous range of bandgap energies. We introduce new methods for generating the n and k curves for an arbitrary bandgap, based on interpolating measured complex refractive index data. First, different dispersion models (Cody-Lorentz, Ullrich-Lorentz and Forouhi-Bloomer) are used to fit the measured data. Then, a linear regression is applied to the fit parameters with respect to the bandgap energy. From the interpolated parameters, the refractive index curve of perovskite with any desired bandgap energy is finally reconstructed. To validate our method, we compare our results with methods from literature and then use it to simulate the absorptance of a single junction perovskite and a perovskite/silicon tandem cell. This shows that our method based on the Forouhi-Bloomer model is more accurate than existing methods in predicting the complex refractive index of perovskite for arbitrary bandgaps.

Photovoltaic (PV) technology is raising attention as a low-cost green energy source. It mainly finds applications in solar fields, on building facades and on rooftop. One of the main issues that can occur is the shading of solar cells inside the photovoltaic module which could affect the maximum power output of the PV panel and the lifetime of the cell itself. In order to predict the behaviour of PV panels in partial shading conditions, simulations and then measurements on two different photovoltaic modules have been carried out and compared. Data have shown that the maximum power output of the panels under 1sun illumination can be predicted by simulation with a 3% discrepancy from measured values, independently from the type of technology and interconnections of the PV module.

The tandem PV technology can potentially increase the efficiency of PV modules over 30%. To design efficient modules, a quantification of the different losses is important. Herein, a model for quantifying the energy loss mechanisms in PV systems under real-world operating conditions with a level of detail back to the components and their fundamental properties is presented. Totally, 17 losses are defined and divided into four categories (fundamental, optical, electrical, and system losses). As example, a system based on a > 29% two-terminal perovskite/silicon tandem cell is considered. The loss distribution at standard test conditions is compared to four geographical locations. The results show that the thermalization, reflection, and inverter losses increase by 1.2%, 1.1%, and 1.4%, respectively, when operating outdoors. Additionally, it is quantified how fill factor gains partly compensate the current mismatch losses. For example, a mismatch of 7.0% in photocurrent leads to a power mismatch of 1.2%. Therefore, the power mismatch should be used as indicator for mismatch losses instead of a current mismatch. Finally, herein, it is shown that solar tracking increases not only the in-plane irradiance but also the efficiency of the tandem module.

We introduce a novel simulation tool capable of calculating the energy yield of a PV system based on its fundamental material properties and using self-consistent models. Thus, our simulation model can operate without measurements of a PV device. It combines wave and ray optics and a dedicated semiconductor simulation to model the optoelectronic PV device properties resulting in the IV-curve. The system surroundings are described via spectrally resolved ray tracing resulting in a cell resolved irradiance distribution, and via the fluid dynamics-based thermal model, in the individual cell temperatures. A lumped-element model is used to calculate the IV-curves of each solar cell for every hour of the year. These are combined factoring in the interconnection to obtain the PV module IV-curves, which connect to the inverter for calculating the AC energy yield. In our case study, we compare two types of 2 terminal perovskite/silicon tandem modules with STC PV module efficiencies of 27.7% and 28.6% with a reference c-Si module with STC PV module efficiency of 20.9%. In four different climates, we show that tandem PV modules operate at 1–1.9 °C lower yearly irradiance weighted average temperatures compared to c-Si. We find that the effect of current mismatch is significantly overestimated in pure optical studies, as they do not account for fill factor gains. The specific yields in kWh/kWp of the tandem PV systems are between −2.7% and +0.4% compared to the reference c-Si system in all four simulated climates. Thus, we find that the lab performance of the simulated tandem PV system translates from the laboratory to outdoors comparable to c-Si systems.