The interlaboratory comparability and reproducibility of all-solid-state battery cell cycling performance are poorly understood due to the lack of standardized set-ups and assembly parameters. This study quantifies the extent of this variability by providing commercially sourced battery materials—LiNi_0.6Mn_0.2Co_0.2O₂ for the positive electrode, Li₆PS₅Cl as the solid electrolyte and indium for the negative electrode—to 21 research groups. Each group was asked to use their own cell assembly protocol but follow a specific electrochemical protocol. The results show large variability in assembly and electrochemical performance, including differences in processing pressures, pressing durations and In-to-Li ratios. Despite this, an initial open circuit voltage of 2.5 and 2.7 V vs Li⁺/Li is a good predictor of successful cycling for cells using these electroactive materials. We suggest a set of parameters for reporting all-solid-state battery cycling results and advocate for reporting data in triplicate.

Lithium argyrodite solid electrolytes have attracted ever-increasing attention for all-solid-state batteries due to their high ionic conductivity and low cost. However, the relation between structure and ionic transport for the halogen-rich lithium argyrodites under different synthesis routes is still elusive. Herein, the influence of synthesis procedures, such as annealing conditions and balling milling, on the structure, ionic conductivity, and activation energy of the lithium argyrodite (e.g., Li_5.5PS_4.5Cl_1.5, Li_5.3PS_4.3Cl_1.7), is systematically investigated. Compared with high-energy ball milling followed by annealing, using fast dry mixing followed by annealing can obtain comparable ionic conductivity of the chlorine-rich lithium argyrodites. Single-crystal LiNi_0.83Co_0.11Mn_0.06O₂-based solid-state battery with these electrolytes shows stable cycling performance, demonstrating that chlorine-rich lithium argyrodite is a promising candidate for all-solid-state batteries.

Due to their high ionic conductivity, lithium-ion conducting argyrodites show promise as solid electrolytes for solid-state batteries. Aliovalent substitution is an effective technique to enhance the transport properties of Li₆PS₅Br, where aliovalent Si substitution triples ionic conductivity. However, the origin of this experimentally observed increase is not fully understood. Our density functional theory (DFT) study reveals that Si⁴⁺ substitution increases Li diffusion by activating Li occupancy in the T4 sites. Redistribution of Li-ions within the lattice results in a more uniform distribution of Li around the T4 and neighboring T5 sites, flattening the energy landscape for diffusion. Since the T4 site is positioned in the intercage jump pathway, an increase in the intercage jump rate is found, which is directly related to the macroscopic diffusion and bulk conductivity. Analysis of neutron diffraction experiments confirms partial T4 site occupancy, in agreement with the computational findings. Understanding the aliovalent substitution effect on interstitials is crucial for improving solid electrolyte ionic conductivity and advancing solid-state battery performance.

The development of improved solid electrolytes (SEs) plays a crucial role in the advancement of bulk-type solid-state battery (SSB) technologies. In recent years, multicomponent or high-entropy SEs are gaining increased attention for their advantageous charge-transport and (electro)chemical properties. However, a comprehensive understanding of how configurational entropy affects ionic conductivity is largely lacking. Herein we investigate a series of multication-substituted lithium argyrodites with the general formula Li_6+x[M1_aM2_bM3_cM4_d]S₅I, with M being P, Si, Ge, and Sb. Structure-property relationships related to ion mobility are probed using a combination of diffraction techniques, solid-state nuclear magnetic resonance spectroscopy, and charge-transport measurements. We present, to the best of our knowledge, the first experimental evidence of a direct correlation between occupational disorder in the cationic host lattice and lithium transport. By controlling the configurational entropy through compositional design, high bulk ionic conductivities up to 18 mS cm⁻¹ at room temperature are achieved for optimized lithium argyrodites. Our results indicate the possibility of improving ionic conductivity in ceramic ion conductors via entropy engineering, overcoming compositional limitations for the design of advanced electrolytes and opening up new avenues in the field.

Lithium argyrodite superionic conductors have recently gained significant attention as potential solid electrolytes for all-solid-state batteries because of their high ionic conductivity and ease of processing. Promising aspects of these materials are the ability to introduce halides (Li_6-xPS_5-xHal_1+x, Hal = Cl and Br) into the crystal structure, which can greatly impact the lithium distribution over the wide range of accessible sites and the structural disorder between the S^2- and Hal^- anion on the Wyckoff 4d site, both of which strongly influence the ionic conductivity. However, the complex relationship among halide substitution, structural disorder, and lithium distribution is not fully understood, impeding optimal material design. In this study, we investigate the effect of bromide substitution on lithium argyrodite (Li_6-xPS_5-xBr_1+x, in the range 0.0 ≤ x ≤ 0.5) and engineer structural disorder by changing the synthesis protocol. We reveal the correlation between the lithium substructure and ionic transport using neutron diffraction, solid-state nuclear magnetic resonance (NMR) spectroscopy, and electrochemical impedance spectroscopy. We find that a higher ionic conductivity is correlated with a lower average negative charge on the 4d site, located in the center of the Li⁺ “cage”, as a result of the partial replacement of S^2- by Br^-. This leads to weaker interactions within the Li⁺ “cage”, promoting Li-ion diffusivity across the unit cell. We also identify an additional T4 Li⁺ site, which enables an alternative jump route (T5-T4-T5) with a lower migration energy barrier. The resulting expansion of the Li⁺ cages and increased connections between cages lead to a maximum ionic conductivity of 8.55 mS/cm for quenched Li_5.5PS_4.5Br_1.5 having the highest degree of structural disorder, an 11-fold improvement compared to slow-cooled Li₆PS₅Br having the lowest degree of structural disorder. Thereby, this work advances the understanding of the structure-transport correlations in lithium argyrodites, specifically how structural disorder and halide substitution impact the lithium substructure and transport properties and how this can be realized effectively through the synthesis method and tuning of the composition.