Mobility is vital for societal wellbeing, economic growth, social inclusion, and access to essential amenities. However, the current system faces significant challenges, including environmental impact, unequal access, and safety concerns. […]

Very-low-level (VLL) urban air operations have been extensively investigated as a solution for mitigating congestion in cities. However, the manner in which the management of such traffic should be performed is still actively investigated. One important component of such a system is the conflict detection and resolution (CD&R), mainly composed of the strategic and tactical CD&R module. While many approaches towards these have been studied, insufficient analysis has been conducted on their compatibility when functioning within a unified, hybrid system. Additionally, their robustness to operational uncertainties such as wind and departure delays is often overlooked. In this work, we investigate the performance of strategic planing methods when combined with tactical CD&R and subjected to a wide range of traffic demand levels and uncertainty conditions. Simulations indicate that the performance of the strategic deconfliction module is highly sensitive to the presence of wind and delay. This decline in performance is partially mitigated by the tactical deconfliction module. Thus, the results suggest that increased use of tactical CD&R could lessen the required level of detail of strategic deconfliction methods, leading to improved compatibility between the two modules.

The increasing integration of Uncrewed Aerial Systems (UAS) into controlled airspace presents significant operational and safety challenges, particularly in conflict detection and resolution (CD&R) for Beyond Visual Line of Sight (BVLOS) operations. Ensuring reliable separation management in U-Space requires robust e-conspicuity solutions that address uncertainties in Communication, Navigation, and Surveillance (CNS) systems. This study evaluates the CERTIFLIGHT UTM Box, an e-conspicuity device designed for General Aviation (GA) and UAS operations, incorporating authenticated GNSS tracking, blockchain-based data integrity, and conflict resolution advisory services. Flight validation tests were conducted using a GA aircraft and a UAS to assess the system's effectiveness in detecting and resolving conflicts under realistic operational conditions. The results indicate that while the UTM Box successfully provided conflict advisories, navigation uncertainties and communication delays exceeding five seconds affected its performance. The study highlights the importance of incorporating CNS system uncertainties into CD&R algorithms to ensure safe separation. Future work will focus on refining conflict resolution strategies, integrating advanced filtering techniques to mitigate sensor noise, and enhancing pilot interface design for improved situational awareness and decision support.

U-Space drone operations are expected to be a driver for further urban development, especially through use cases such as medical and commercial parcel delivery. In particular, package delivery using small drones shows great promise, with e-commerce giants such as Amazon deploying limited-scale drone delivery trials in rural areas. As the technology matures, large-scale operations will take place in constrained urban areas, leading to high airborne traffic densities. It is necessary to develop a robust automated separation management system that actively ensures safe separation of drones both in the air and on the ground. This paper focuses on the Strategic element, more specifically on pre-departure planning. The aim of this is to reduce the chance of conflicts around vertiports, where spatial and environmental constraints make tactical resolutions difficult. This work focuses on two scenarios: a single pad for both takeoffs and landings (in a spatially constrained urban area) and 4 takeoff-landing pad pairs (for a distribution center). Several methods are compared for this takeoff sequencing task, coupled with a conflict detection algorithm: A First-Come First-Served method that applied delay to conflicting flights, a Mixed-Integer Programming approach, a Genetic Algorithm, Particle Swarm Algorithm and Simulated Annealing were used. For a single-pad approach, first-come first-served works best in terms of computation time and total deployment time (or makespan). For the multi-pad approach however, changing the flight sequence through metaheurisitic methods and mixed-integer linear programming show a reduction in total deployment time.

U-space/UTM operations are considered an integral part of the future development of cities, with applications ranging from package delivery to urban air mobility. However, this new complex environment also poses challenges for the conflict detection and resolution (CD&R) process, especially if aircraft will have to navigate above the existing street network due to privacy and obstacle constraints. The research at hand aims to investigate how information about the environment and other aircraft can be used to improve the performance of CD&R methods in constrained urban airspace. For this, three algorithms are developed and tested, each with different levels of information availability: the first solely uses current state information for conflict solving, the second includes additional information about the urban environment within the CD&R process, and the last also incorporates trajectory intent data to solve conflicts. These methods are tested within simulations of urban air traffic scenarios at various demand and wind levels to determine their safety and efficiency performance. Results show the use of street geometry information benefits the resolution process greatly, increasing the safety level while minimally affecting efficiency. Intent information is shown to not be critical for achieving this.

Abstract—The integration of unmanned aerial systems (UASs) into existing airspace is imminent as the concept is maturing. U- Space is a concept in which UASs are allowed to fly alongside general aviation aircraft, requiring all aircraft in the airspace to transmit navigation data using radio and network identification. Nevertheless, a consensus is required for the separation in case of conflict amidst the limitations of communication, navigation, and surveillance (CNS) systems. Update rate and probability depict the uncertainty in the communication systems, while spread around the ground truth in position describes the navigation accuracy. Then, BlueSky, an open-source simulator, produces thousands of conflict detection and resolutions to evaluate the CNS limitation on the intrusion prevention rate and loss of separation severity. This paper concludes that higher update rate, probability, and position accuracy lead to safer conflict resolution, and selecting 50 meters as the radius of the protected zone results in a 25-meter intrusion in the worst case.

Urban air mobility can be a potential solution for urban congestion, and high-level concepts of operations (e.g., UTM, U-space) have been developed with the help of large-scale simulations of multi-agent systems. However, one aspect that should be researched more is the effect of wind on the safety and efficiency of missions in an urban environment. While studies that analyse the potential effect of wind on U-space operations exist, they mostly use constant wind fields, or highly simplified wind models. The study at hand investigates whether medium-fidelity CFD models can be used to predict and match recorded wind data in the city centre of The Hague. Six locations with distinct urban features were chosen, and wind measurements were recorded on two separate days. Using the rooftop wind properties obtained during the measurement sessions, computational fluid dynamics (CFD) simulations were performed within a large urban model of the city. Results indicate that there are large discrepancies between the simulated and measured values. Some wind phenomena observed within the measured wind data were also replicated by the CFD model. Thus, based on the results presented in this work, future research should focus on improving computer city models and wind measurement methods to ensure the development of concepts of operations that maximise the safety and efficiency of future U-space operations.

Reinforcement Learning (RL) is rapidly becoming a mainstay research direction within Air Traffic Management and Control (ATM/ATC). Many international consortia and individual works have explored its applicability to different ATC and U-Space / Urban Aircraft System Traffic Management (UTM) tasks, such as merging traffic flows, with varying levels of success. However, to date there is no common basis on which these RL techniques are compared, with many research parties building their own simulator and scenarios from scratch. This can diminish the value of this research, as the performance of an algorithm cannot be easily verified, or compared to that of other implementations. This hampers development in the long run. The gymnasium library shows for other research domains that this can be solved by providing a set of standardised environments, which can be used to test different algorithms, and compare them to benchmark results. This paper proposes BlueSky-Gym: a library that provides a similar set of test environments for the aviation domain, building on the existing open-source air traffic simulator BlueSky. The current BlueSky-Gym environments range from vertical descent environments, to static obstacle avoidance and traffic flow merging. Built upon the Gymnasium API and the BlueSky air traffic simulator, it delivers an open-source solution for the ATC-specific RL performance benchmark. In the initial release of BlueSky-Gym, 7 functional environments are presented. Preliminary experiments with PPO, SAC, DDPG and TD3 are presented in this paper. Results show stable training is obtained on all of the environments with the default hyperparameters. On some environments, there is a large performance gap, with the on-policy PPO often trailing, but overall no clear algorithm that outperforms others across the board in terms of total reward.

For car traffic it was found that a more crowded area leads to a lower speed and a lower arrival rate. The relation between crowdedness and speed (or arrival rate) can be expressed in a network fundamental diagram, or macroscopic fundamental diagram (MFD). Similar concepts have been shown for pedestrian and train traffic. In this paper, we extend the concept to three spatial dimensions. While simulations have explored some concepts, we present for the first time empirical results of the relation between the crowdedness in the air and the performance of the “network.” We base our results on several months of data of airplanes around Amsterdam Schiphol Airport. Similar to car traffic, we observe a reduction in speeds as the number of airplanes in the area increases. However, even at the highest observed densities, we do not see a reduction in flows. This is because of active and intensive management (based on departure/landing possibilities), comparable to perimeter control in traffic, as well as a minimum airplane speed. This paper introduces an interesting concept of applying a MFD to three-dimensional (3D) spaces. We also show to what extent the performance reduction is caused by speed reduction and to what extent it is caused by less efficient routes. The MFD concept can eventually be used to also manage 3D airspaces for applications with less strict microscopic air traffic management than the current management around airports.

With the rapid increase in the use of Unmanned Aerial Systems (UAS) for commercial applications such as medical and parcel delivery, the need for safe airborne separation in airspace has become critical. This paper examines the impact of position uncertainty on autonomous separation methods within U-Space, a European Union initiative for managing drone traffic. The study focuses on evaluating various conflict resolution algorithms—specifically, Modified Voltage Potential (MVP) and Velocity Obstacle (VO) variations—under conditions of navigational uncertainty. Through Monte Carlo simulations using the BlueSky ATM simulator, position uncertainty stemming from Global Navigation Satellite Systems (GNSS) errors is modelled and analysed. The research compares the effectiveness of different conflict resolution strategies in preventing conflicts between UAS, measuring intrusion prevention rates and the closest point of approach during encounters. The results indicate that MVP provides superior performance in handling positional uncertainty, offering more robust conflict resolution capabilities than VO-based methods especially at shallow angles conflict situation. These findings are critical for ensuring the safe integration of UAS into increasingly congested airspace environments, guiding future developments in U-Space operations.

As urban ground transportation congestion increases, there is growing interest in urban air transportation, such as delivery drones and air taxis. However, managing air traffic in densely populated urban areas poses significant challenges, which require effective flight planning, separation management, and airspace design. This paper investigates dynamic capacity balancing methods to manage air traffic in constrained urban airspace, where drones must fly above the existing road network. Specifically, it compares the effectiveness of labelling high-complexity zones using historical data versus real-time aggregate flow data. The results indicate that while both approaches reduce airspace intrusions and improve safety, the best approach depends on traffic demand levels. At lower demand levels, using historical data yields better safety outcomes, whereas using real-time data is more effective at higher demand levels due to its flexibility. At their best, both methods increase the travel distance by less than 6% while reducing airspace intrusions by 30% compared to a case without dynamic capacity balancing.

Conventional Air Traffic Control is still predominantly being done by human Air Traffic Controllers, however, as the traffic density increases, the workload of the controllers increases as well. Especially for the area of unmanned aviation, driven by the rise in drones, having human controllers might become unfeasible. One of the methods that is currently being investigated for replacing the conflict resolution task of Air Traffic Control is Reinforcement Learning. As violation of the required separation margins, also called an intrusion, is an event of relatively low frequency, using Reinforcement Learning for this task comes with difficulties that can potentially be attributed to data imbalance. This paper artificially increased the traffic density during the training phase of the Reinforcement Learning method to investigate what the importance is of a balanced data set on the performance of the Reinforcement Learning method. It was found that as the traffic density increased, the Reinforcement Learning methods started to outperform the analytical methods. Beyond this it was found that methods trained at higher traffic densities, but tested at lower traffic densities, outperformed the methods trained at that specific density. This indicates that it might be better to always ensure that the training scenarios are more complex than anticipated during the execution phase, even if that results in unrealistic scenarios.

<p>There are several efforts to explore employing drones to replace ground transportation in cities. However, this would mean that the expected traffic densities would be significantly higher than existing air traffic management. A decentralised system for traffic management may be necessary in this future because (1) not all airspace actors will want to freely share data, (2) the uncertainty of missions due to wind or other factors could make a previous plan inoperable, and (3) the ad hoc nature of urban missions makes them difficult to plan in advance. This work focuses on the challenges of drone operations within constrained urban airspace. We define constrained airspace as a virtual network overlaid on the physical environment, where tall buildings and urban infrastructure dictate the allowed routes. Drones are restricted to flying within this virtual network, either above the existing street network or along other predetermined segments. A dynamic and decentralised traffic management method is presented. The method uses current aggregate flow data to identify and alter the cost of travelling through high-density clusters. The goal is to reduce local traffic density and complexity by encouraging alternate routes. Three different clustering strategies are presented that look at the current position of aircraft and recent safety events. The dynamic traffic management method is first illustrated with two simple example scenarios. Then an experiment is conducted with different traffic demand levels within the city of Rotterdam. It was observed that when using traffic complexity indicators, the method is able to reduce safety events by 30 percent while only increasing the distance travelled by 6 percent.</p><p> </p>

Abstract—In the coming decades, drones are expected to operate within urban areas at high volumes, and if implemented suc- cessfully, applications such as infrastructure inspection, medical supply and parcel delivery can be improved by the technology. This poses a challenge: how are these drones to be guided in this highly-constrained airspace? Many existing projects have approached the problem from different angles: some place more importance on the Tactical Layer and thus resolving conflicts in flight, while other research focuses on the Strategic Layer with scheduling or airspace design. While analysis is done on a complete system, with all separation management layers implemented, work remains to be done regarding quantifying how these layers interact, and what positive characteristics of these interactions can be utilised to make the system more efficient, safe, and robust to uncertainties. This paper proposes a framework on which this analysis can be performed. Firstly, lay- ers are investigated independently. A feedback system is proposed, where layer outputs are measured, as is the resulting system performance. For instance, an initial hypothesis is that reducing airspace complexity in the Strategic layer, while accounting for uncertainty, will lead to better overall system performance. This can help with minimising flight times and improving overall safety. Also, manoeuvres performed by the Tactical (in-flight) layer should take this complexity metric into account. The feedback loop approach also proposes that the complexity be fed back to the central planner, and that the Strategic (Pre-Flight) layer should be able to take system status into account when performing planning.

The use of small aircraft for a wide range of missions in urban airspace is expected to increase in the future. In Europe, efforts have been invested into developing a unified system, called U-space, to manage aircraft in dense very-low-level urban airspace. The Metropolis II project aimed to research what degree of centralisation an air traffic management system should use in such airspace. The paper at hand is a follow-up, and investigates improvements that can be brought to the tactical conflict prevention, detection, and resolution module of such a system in order to harmonise these components with an organic high-density U-space environment. The proposed improvements are: the prioritisation of vertical conflict prevention in intersections, the use of intent in detecting and resolving conflicts, and the use of heading-based manoeuvres in open airspace. Results show that the use of intent information in the conflict detection process, as well as the implementation of suitable tactical prevention procedures, can greatly increase airspace safety. Furthermore, the experiments revealed that the effectiveness of conflict resolution algorithms is highly dependent on the airspace rules and structure. This reiterates the potential for increasing the safety and efficiency of operations within constrained airspace if the tactical separation modules are unified with the other components of air traffic management systems for U-space.

The interest in urban air mobility as a potential solution for urban congestion is steadily growing. Air operations in urban areas can present added complexity as compared with traditional air traffic management. As a result, it is necessary to test and develop novel airspace designs and rules. As airspace in urban areas is a scarce resource, creating structures and rules that effectively utilise the airspace is an important challenge. This work specifically focuses on layered airspace design in urban operations constrained to fly between the existing buildings. Two design parameters of airspace design are investigated with two sub-experiments. Sub-experiment 1 investigates layer function assignment by comparing concepts from previous research with different layer assignment distributions. Sub-experiment 2 investigates the flight rules of vertical distribution of traffic within the airspace, to determine whether this is best achieved in a static (pre-allocated) or dynamic manner. Both sub-experiments analyse the overall system safety, route duration, and route distance under increasing traffic demand. Results reveal that the importance of cruising airspace is apparent at high densities. Results also shows that the safest layer allocation flight rule depends on the traffic density. At lower densities dynamic rules help to spread traffic locally. However, when the airspace is saturated it is safer to pre-allocate flight heights if achieved uniformly.

The number of unmanned aircraft operating in the airspace is expected to grow exponentially during the next decades. This will likely lead to traffic densities that are higher than those currently observed in civil and general aviation, and might require both a different airspace structure compared to conventional aviation, as well as different conflict resolution methods. One of the main disadvantages of analytical conflict resolution methods, in high-traffic density scenarios, is that they can cause instabilities of the airspace due to a domino effect of secondary conflicts. Therefore, many studies have also investigated other methods of conflict resolution, such as Deep Reinforcement Learning, which have shown positive results, but tend to be hard to explain due to their black-box nature. This paper investigates if it is possible to explain the behaviour of a Soft Actor-Critic model, trained for resolving vertical conflicts in a layered urban airspace, by interpreting the policy through a heat map of the selected actions. It was found that the model actively changes its policy depending on the degrees of freedom and has a tendency to adopt preventive behaviour on top of conflict resolution. This behaviour can be directly linked to a decrease in secondary conflicts when compared to analytical methods and can potentially be incorporated into these methods to improve them while maintaining explainability.

Unmanned Aircraft Systems (UAS) Traffic Management (UTM) is an active research subject as its proposed applications are increasing. UTM aims to enable a variety of UAS operations, including package delivery, infrastructure inspection, and emergency missions. That creates the need for extensive research on how to incorporate such traffic, as conventional methods and operations used in Air Traffic Management (ATM) are not suitable for constrained urban airspace. This paper proposes and compares several traffic capacity balancing methods developed for a UTM system designed to be used in highly dense, very low-level urban airspace. Three types of location-based dynamic traffic capacity management techniques are tested: street-based, grid-based, and cluster-based. The proposed systems are tested by simulating traffic within mixed (constrained and open) urban airspace based on the city of Vienna at five different traffic densities. Results show that using local, area-based clustering for capacity balancing within a UTM system improves safety, efficiency, and capacity metrics, especially when simulated or historical traffic data are used.

The traffic density of small aerial vehicles operating within urban environments is expected to increase significantly in the near future. This urban environment is highly constrained due to being limited to the low-altitude airspace directly above the existing road network. Multiple studies have addressed factors influencing the capacity of urban airspace. These have used simulations of aircraft, yet the empirical nature of these simulations limits their use beyond the specific conditions that have been tested. Analytical models would not have this limitation, but they are only developed for general airspace, while the emergent patterns in constrained urban airspace are different than in general, unconstrained conditions. For instance, queuing and local congestion are patterns that are unique to the heavily-constrained environment. Therefore, in this paper, we derive an analytical model for air traffic in a confined airspace to find the influencing factors for its capacity. By means of a simulation of aerial vehicles, we verify the analytical model and show a relationship between the mean flow rate and mean density in a two-dimensional orthogonal grid network airspace. Results show that the entire airspace can become unstable when the maximum capacity of just one intersection is reached. Furthermore, the maximum airspace density is found to be unaffected by cruise speed. The results demonstrate how the derived analytical model provides an effective tool to predict the effect of several design parameters on the capacity of constrained urban airspace. Moreover, this model can form the basis for further extensions, including the altitude dimension and non-orthogonal or non-four-way intersections.

Current predictions for future operations with drones estimate traffic densities orders of magnitude higher than any observed in manned aviation. Such densities call for further research and innovation, in particular, into conflict detection and resolution without the need for human intervention. The layered airspace concept, where aircraft are separated per vertical layer according to their heading, has been widely researched and proven to increase traffic capacity. However, aircraft traversing between layers do not benefit from this separation and alignment effect. As a result, interactions between climbing/descending and cruising aircraft can lead to a large increase in conflicts and intrusions. This paper looks into ways of reducing the impact of vertical transitions within the environment. We test two reinforcement learning methods: a decision-making module and a control execution module. The former issues a lane change command based on the planned route. The latter performs operational control to coordinate the longitude and vertical movement of the aircraft for a safe merging manoeuvre. The results show that reinforcement learning is capable of optimising an efficient driving policy for layer change manoeuvres, decreasing the number of conflicts and losses of minimum separation compared to manually defined navigation rules.