Cryogenic characterization and modeling of two nanometer bulk CMOS technologies (0.16-μm and 40-nm) are presented in this paper. Several devices from both technologies were extensively characterized at temperatures of 4 K and below. Based on a detailed understanding of the device physics at deep-cryogenic temperatures, a compact model based on MOS11 and PSP was developed. In addition to reproducing the device DC characteristics, the accuracy and validity of the compact models are demonstrated by comparing time-and frequency-domain simulations of complex circuits, such as a ring oscillator and a low-noise amplifier (LNA), with the measurements at 4 K.

The characterization of nanometer CMOS transistors of different aspect ratios at deep-cryogenic temperatures (4 K and 100 mK) is presented for two standard CMOS technologies (40 nm and 160 nm). A detailed understanding of the device physics at those temperatures was developed and captured in an augmented MOS11/PSP model. The accuracy of the proposed model is demonstrated by matching simulations and measurements for DC and time-domain at 4 K and, for the first time, at 100 mK.

Quantum computing holds the promise to achieve unprecedented computation power and to solve problems today intractable. State-of-the-art quantum processors consist of arrays of quantum bits (qubits) operating at a very low base temperature, typically a few tens of mK, as shown in Fig. 15.5.1 The qubit states degrade naturally after a certain time, upon loss of quantum coherence. For proper operation, an error-correcting loop must be implemented by a classical controller, which, in addition of handling execution of a quantum algorithm, reads the qubit state and performs the required corrections. However, while few qubits (∼10) in today's quantum processors can be easily connected to a room-temperature controller, it appears extremely challenging, if not impossible, to manage the thousands of qubits required in practical quantum algorithms [1].

Quantum computers could efficiently solve problems that are intractable by today's computers, thus offering the possibility to radically change entire industries and revolutionize our lives. A quantum computer comprises a quantum processor operating at cryogenic temperature and an electronic interface for its control, which is currently implemented at room temperature for the few qubits available today. However, this approach becomes impractical as the number of qubits grows towards the tens of thousands required for complex quantum algorithms with practical applications. We propose an electronic interface for sensing and controlling qubits operating at cryogenic temperature implemented in standard CMOS.

Quantum computers1 could revolutionize computing in a profound way due to the massive speedup they promise. A quantum computer comprises a cryogenic quantum processor and a classical electronic controller. When scaling up the cryogenic quantum processor to at least a few thousands, and possibly millions, of qubits required for any practical quantum algorithm, cryogenic CMOS (cryo-CMOS) electronics is required to allow feasible and compact interconnections between the controller and the quantum processor. Cryo-CMOS leverages the CMOS fabrication infrastructure while exploiting the continuous improvement of performance and miniaturization guaranteed by Moore's law, in order to enable the fabrication of a cost-effective practical quantum computer. However, designing cryo-CMOS integrated circuits requires a new set of CMOS device models, their embedding in design and verification tools, and the possibility to co-simulate the cryo-CMOS/quantum-processor architecture for full-system optimization. In this paper, we address these challenges by focusing on their impact on the design of complex cryo-CMOS systems.