Anode-free aqueous zinc metal batteries (AZMBs) offer significant potential for energy storage due to their low cost and environmental benefits. Ti₃C₂T_x MXene provides several advantages over traditional metallic current collectors like Cu and Ti, including better Zn plating affinity, lightweight, and flexibility. However, self-freestanding MXene current collectors in AZMBs remain underexplored, likely due to challenges with Zn deposition reversibility. This study investigates the combination of a Ti₃C₂T_x self-freestanding film with advanced electrolyte engineering, specifically examining the effects of Li-salt and propylene carbonate (PC) as additives on Zn plating reversibility. While using Li⁺ ions as an additive alone facilitates uniform Zn deposition on bulk metals through the electrostatic shielding effect, the addition of Li-salt negatively impacts Zn plating uniformity on Ti₃C₂T_x. Meanwhile, using PC additive alone forms an organic SEI layer on Ti₃C₂T_x and causes Zn agglomeration. The use of both additives together results in a ZnF₂-containing hybrid SEI layer with improved interfacial kinetics, promoting more uniform Zn deposition. This approach achieves an average Coulombic efficiency (CE) of 96.8% over 150 cycles (a maximum CE of 97.8%). The study highlights the strategic difference in electrolyte design, emphasizing the need for tailored approaches to optimize Zn deposition on MXenes, contrasting with traditional metallic current collectors.

Here, we show that we can synthesize free-standing palladium nanoparticles with a size of about 5 nm embedded in a fluorinated polymer matrix using magnetron codeposition and a subsequent annealing step. Indeed, we deposit with magnetron sputtering at the same time PTFE and Pd, and a subsequent thermal annealing step under a hydrogen atmosphere ensures agglomeration of the Pd atoms into small nanoparticles. This scalable vapor-based method allows deposition on all kinds of surfaces, including substrates and optical fibers. Using a combination of transmission electron microscopy, grazing-incidence diffraction, neutron and X-ray reflectometry, and X-ray photoelectron spectroscopy, we characterize the nanocomposite films and the palladium particles inside. These palladium nanoparticles could have a variety of applications in catalysis, hydrogen compressors, and optical hydrogen sensors. For the later application, we show using optical transmission measurements that the nanoparticles can reversibly absorb hydrogen, having well-defined steps in optical transmission when the hydrogen pressure is changed. Owing to their small size, the polymer matrix, and high surface-to-volume ratio, the nanoparticles show subsecond response times to changes in hydrogen concentration.

Last year’s mixed Sn–Pb perovskites have been applied as low-bandgap absorbers in efficient solar cells. However, the performance is still limited by tin oxidation, resulting in doping and defects. Here we perform a quantitative analysis on how tin oxidation affects the optoelectronic properties of spin-coated Cs_0.25FA_0.75Sn_0.5Pb_0.5I₃with varying SnF₂additions ranging from 0 to 20 mol %. First, optical spectroscopy is used to determine the fraction of Sn⁴⁺in the spin-coating solution, which varies depending on the purity of the starting SnI₂precursor. By applying steady-state microwave conductance, a large decrease in the dark conductivity from ∼100 to <∼1 S m^–1in the spin-coated films on going from 0 to 2 mol % SnF₂is observed. We conclude that, without SnF₂, ∼12% of the Sn⁴⁺in solution leads to mobile carriers in the form of free holes, p₀, in the perovskite layer. Upon SnF₂addition, p₀decreases to <1 × 10¹⁶cm^–3. We infer that a ∼70 times excess of SnF₂over the initial concentration of Sn⁴⁺in solution is required to scavenge the Sn⁴⁺and obtain layers with reduced doping. Although the reduction of p₀and defects results in increased carrier lifetimes, higher SnF₂additions are also required to decrease the surface defects, leading to even longer lifetimes close to 200 ns. The reduced doping of these perovskite films with SnF₂makes them ideal candidates for efficient solar cells; however, SnF₂also induces compositional heterogeneity and accumulation of SnO_xat the surface.

Depending on the applications based on graphene, single-layer or few-layer graphene would be more beneficial. Ideally, graphene could be nucleated directly with the required thickness. However, some aspects related to graphene thickness and uniformity control still need to be solved. This work aims to better understand graphene formation using Mo thin films as a catalyst. The grown graphene films were characterized using SEM, TEM, XPS, AFM, standard Raman spectroscopy and 3D Raman surface imaging. A correlation between the catalyst thickness and the number of layers is established. All the characterization techniques show that the number of graphene layers inversely scales with the Mo catalyst thickness used for the graphene synthesis. Then, by simply adjusting the catalyst thickness, the number of graphene layers can be engineered from few-layer graphene (FLG) up to multi-layer graphene (MLG). A pinhole distribution of 1 % was detected on the films synthesized on 50 nm and 100 nm Mo thicknesses after the catalyst was etched. On the synthesized FLG (500 nm Mo), no holes were observed on the surface film after the etching process and even after a transfer onto another substrate. These results can enable the formation of FLG with a controlled thickness and good uniformity.

Lithium metal with its high theoretical capacity and low negative potential is considered one of the most important candidates to raise the energy density of all-solid-state batteries. However, lithium filament growth and its induced solid electrolyte decomposition pose severe challenges to realize a long cycle life. Here, dendrite growth in solid-state Li metal batteries is alleviated by introducing a high dielectric material, barium titanate, as a filler that removes the electric field gradients that catalyze dendrite formation. In symmetrical Li-metal cells, this results in a very small over-potential of only 48 mV at a relatively high current density of 1 mA cm⁻², when cycling a capacity of 2 mA h cm⁻² during 1700 h. The high dielectric filler improves the Coulombic efficiency and cycle life of full cells and suppresses electrolyte decomposition as indicated by solid-state nuclear magnetic resonance (NMR) and X-ray photoelectron spectroscopy (XPS) measurements. This indicates that the high dielectric filler can suppress dendrite formation, thereby reducing solid electrolyte decomposition reactions, resulting in the observed low overpotentials and improved cycling efficiency.

We have designed and realized a temperature and pressure controlled cell for Neutron Reflectometry (NR) and Small Angle Neutron Scattering (SANS) that is compatible with simultaneous optical transmission and resistivity measurements. The cell can accommodate samples up to 102 mm (4 inch) in diameter, can be pressurized from vacuum up to 10 bar gas pressure and the sample temperature can be controlled up to 350°C. The four single crystal quartz windows ensure both a good neutron and optical transmission and hence can be used in combination with in-situ optical transmission measurements. We present the cell and illustrate its performance with a series of neutron reflectometry experiments performed on Ta based thin films under a hydrogen containing atmosphere.

Mixed Sn-Pb halide perovskites are promising absorber materials for solar cells due to the possibility of tuning the bandgap energy down to 1.2-1.3 eV. However, tin-containing perovskites are susceptible to oxidation affecting the optoelectronic properties. In this work, we investigated qualitatively and quantitatively metastable oxygen-induced doping in isolated ASn_xPb_1-xI₃ (where A is methylammonium or a mixture of formamidinium and cesium) perovskite thin films by means of microwave conductivity, structural and optical characterization techniques. We observe that longer oxygen exposure times lead to progressively higher dark conductivities, which slowly decay back to their original levels over days. Here oxygen acts as an electron acceptor, leading to tin oxidation from Sn²⁺ to Sn⁴⁺ and creation of free holes. The metastable oxygen-induced doping is enhanced by exposing the perovskite simultaneously to oxygen and light. Next, we show that doping not only leads to the reduction in the photoconductivity signal but also induces long-term effects even after loss of doping, which is thought to derive from consecutive oxidation reactions leading to the formation of defect states. On prolonged exposure to oxygen and light, optical and structural changes can be observed and related to the formation of SnO_x and loss of iodide near the surface. Our work highlights that even a short-term exposure to oxygen immediately impairs the charge carrier dynamics of the perovskite, while structural perovskite degradation is only noticeable upon long-term exposure and accumulation of oxidation products. Hence, for efficient solar cells, exposure of mixed Sn-Pb perovskites to oxygen during production and operation should be rigorously blocked.

Achieving both high redox activity and rapid ion transport is a critical and pervasive challenge in electrochemical energy storage applications. This challenge is significantly magnified when using large-sized charge carriers, such as the sustainable ammonium ion (NH₄⁺). A self-assembled MXene/n-type conjugated polyelectrolyte (CPE) superlattice-like heterostructure that enables redox-active, fast, and reversible ammonium storage is reported. The superlattice-like structure persists as the CPE:MXene ratio increases, accompanied by a linear increase in the interlayer spacing of MXene flakes and a greater overlap of CPEs. Concurrently, the redox activity per unit of CPE unexpectedly intensifies, a phenomenon that can be explained by the enhanced de-solvation of ammonium due to the increased volume of 3 Å-sized pores, as indicated by molecular dynamic simulations. At the maximum CPE mass loading (MXene:CPE ratio = 2:1), the heterostructure demonstrates the strongest polymeric redox activity with a high ammonium storage capacity of 126.1 C g⁻¹ and a superior rate capability at 10 A g⁻¹. This work unveils an effective strategy for designing tunable superlattice-like heterostructures to enhance redox activity and achieve rapid charge transfer for ions beyond lithium.

At ambient conditions, rare-earth oxyhydride thin films show reversible photochromism and photoconductivity, while their mechanism and relation are still unclear. In this work, this question is explored with in situ time-resolved measurements of both optical and transport properties of Gd-based oxyhydride thin films. It is found that p-type large polaron conduction is the initial mechanism of charge transport; however, upon photo-darkening, a 10⁴-fold increase of conductivity occurs, and n-type carriers become dominant. Further, photochromism and photoconductivity are shown to originate from a single process, as indicated by the fact that the photoconductivity is exponentially proportional to the increase of optical absorption. This exponential relation, notably, cannot stem from any of the optically absorbing species thought responsible for photochromism and, therefore, suggests that their formation is accompanied by a concerted increase of negative charge carriers in the Gd oxyhydride films.

Silicon-aluminum-oxigen (SiAlO) coatings doped with Sm²⁺ and prepared by reactive magnetron co-sputtering of Si, Al, and Sm targets, are attractive for luminescence solar concentrator applications but suffer from the low absorption between 300 and 600 nm. This article reports that the main cause of low absorption is a high concentration of undesired Sm³⁺. This finding is supported by optical transmittance, photoluminescence emission and excitation characterization, and X-ray photoelectron spectroscopy data of the Sm's 3d^5/2 edge. We present an alternative deposition process for obtaining Sm doped SiAlO layers with enhanced Sm²⁺ absorption by incorporating Sm through the use of multilayer thin-film precursors composed of metallic Sm and SiAlO layers. After thermal post-deposition treatments, diffusion and reaction of the metallic Sm layers with the SiAlO host results in coatings showing the characteristic 5d → 4f transitions of Sm²⁺ in the region between 250 and 600 nm which were not detectable in Sm-doped single layers. This same deposition strategy produces Tm doped SiAlO coatings with Tm²⁺‘s characteristic luminescence at 1132 nm when the SiAlO host is in the mullite composition region. The photoluminescence excitation spectrum of Tm²⁺ is compared to phosphor with similar composition and covers the range between 300 and 700 nm.

The electrochemical nitrogen reduction reaction (NRR) is a promising alternative to the current greenhouse gas emission intensive process to produce ammonia (NH₃) from nitrogen (N₂). However, finding an electrocatalyst that promotes NRR over the competing hydrogen evolution reaction (HER) has proven to be difficult. This difficulty could potentially be addressed by accelerating the electrocatalyst development for NRR by orders of magnitude using high-throughput (HTP) workflows. In this work, we developed a HTP gas diffusion electrode (GDE) cell to screen up to 16 electrocatalysts in parallel. The key innovation of the cell is the use of expanded Polytetrafluoroethylene (ePTFE) gas diffusion layers (GDL) which simplifies the handling of catalyst arrays compared to carbon fabrics and enables sufficient N₂ mass transport. We demonstrate the robustness of the HTP workflow by screening 528 bimetallic catalysts of composition AB (A,B = Ag, Al, Au, Co, Cu, Fe, Mn, Mo, Ni, Pd, Re, Ru, W) for NRR activity. None of the materials produced ammonia significantly over background level which emphasizes the difficulty of finding active electrocatalysts for NRR and narrows down the search space for future studies.

In this study, different surface pretreatments were applied to clean and activate titanium alloy surfaces. The samples were subjected to grit blasting treatments using two different pressures and afterwards, a UV/Ozone treatment was applied at different times to study the wettability and surface oxidation of the titanium samples. Scanning electron microscopy and laser confocal microscopy showed the surface morphology and the increased roughness with grit blasting pressure. X-ray Photoelectron Spectroscopy revealed that titanium was increasingly oxidized with increasing UV/Ozone treatment time, which leads to a reduced contact angle and a better adhesive performance in a butt tension test proving the effectivity of this surface treatment for titanium. Furthermore, the addition of sol-gel AC-120 and corrosion inhibition primer BR 6747 showed to be an additional improvement in the initial adhesion and after different degrees of aging by exposure to salt-spray, making the surface treatment techniques used in this research, a promising environmental friendly alternative to improve adhesive bonding performance.

Direct electrochemical nitrogen reduction holds the promise of enabling the production of carbon emission-free ammonia, which is an important intermediate in the fertilizer industry and a potential green energy carrier. Here we show a strategy for ambient condition ammonia synthesis using a hydrogen permeable nickel membrane/electrode that spatially separates the electrolyte and hydrogen reduction side from the dinitrogen activation and hydrogenation sites. Gaseous ammonia is produced catalytically in the absence of electrolyte via hydrogenation of adsorbed nitrogen by electrochemically permeating atomic hydrogen from water reduction. Dinitrogen activation at the polycrystalline nickel surface is confirmed with 15N2 isotope labeling experiments, and it is attributed to a Mars-van Krevelen mechanism enabled by the formation of N-vacancies upon hydrogenation of surface nitrides. We further show that gaseous hydrogen does not hydrogenate the adsorbed nitrogen, strengthening the benefit of having an atomic hydrogen permeable electrode. The proposed approach opens new directions toward green ammonia.

Wide-band-gap perovskites such as methylammonium lead bromide (MAPB) are promising materials for tandem solar cells because of their potentially high open-circuit voltage, which is yet still far below the maximum limit. The relatively short charge-carrier lifetimes deduced from time-resolved photoluminescence (TRPL) measurements seem in strong contrast with the long lifetimes observed with time-resolved photoconductance measurements. This is explained by a large amount of hole defect states, NT > 1016 cm-3, in spin-coated layers of MAPB residing at or near the grain boundaries. The introduction of hypophosphorous acid (HPA) increases the average grain size by a factor of 3 and reduces the total concentration of the trap states by a factor of 10. The introduction of HPA also increases the fraction of initially generated holes that undergo charge transfer to the selective contact, Spiro-OMeTAD (SO), by an order of magnitude. In contrast to methylammonium lead iodide (MAPI)/SO bilayers, a reduction of the carrier lifetime is observed in MAPB/SO bilayers, which is attributed to the fact that injected holes undergo interfacial recombination via these trap states. Our findings provide valuable insight into the optoelectronic properties of bromide-containing lead halide perovskites essential for designing efficient tandem solar cells.

Chemical vapour deposition (CVD) has emerged as the dominant technique to combine high quality with large scale production of graphene. The key challenge for CVD graphene remains the transfer of the film from the growth substrate to the target substrate while preserving the quality of the material. Avoiding the transfer process of single or multi-layered graphene (SLG-MLG) has recently garnered much more interest. Here we report an original method to obtain a 4-inch wafer fully covered by MLG without any transfer step from the growth substrate. We prove that the MLG is completely released on the oxidized silicon wafer. A hydrogen peroxide solution is used to etch the molybdenum layer, used as a catalyst for the MLG growth via CVD. X-ray photoelectron spectroscopy proves that the layer of Mo is etched away and no residues of Mo are trapped beneath MLG. Terahertz transmission near-field imaging as well as Raman spectroscopy and atomic force microscopy show the homogeneity of the MLG film on the entire wafer after the Mo layer etch. These results mark a significant step forward for numerous applications of SLG-MLG on wafer scale, ranging from micro/nano-fabrication to solar cells technology.

This paper describes a novel method to fabricate porous graphene oxide (PGO) from GO by exposure to oxygen plasma. Compared to other methods to fabricate PGO described so far, e.g. the thermal and steam etching methods, oxygen plasma etching method is much faster. We studied the development of the porosity with exposure time using atomic force microscopy (AFM). It was found that the development of PGO upon oxygen-plasma exposure can be controlled by tapping mode AFM scanning using a Si tip. AFM tapping stalls the growth of pores upon further plasma exposure at a level that coincides with the fraction of sp² carbons in the GO starting material. We suggest that AFM tapping procedure changes the bond structure of the intermediate PGO structure, and these stabilized PGO structures cannot be further etched by oxygen plasma. This constitutes the first report of tapping AFM as a tool for local mechano-chemistry.