Recently, the promising multi-component magnetocaloric materials (Mc-MCMs) are found to have a tunable giant magnetocaloric effect (GMCE) near room-temperature and manifest fruitful functionalities like multi-caloric effects, which are candidates for solid-state caloric applications. Introducing vacancy defects is found to be an efficient method to optimize its GMCE property. However, the responsible mechanism and especially the characteristics of the atomic vacancies are far from being elucidated. Here, we produce direct-solidified MnCoNiGeSi-based Mc-MCMs which exhibit the distinct shift in transition temperature (T_t) upon introducing Mn/Ni vacancies. It is found that T_t decreased significantly in the Mn vacancy materials and increased in the Ni vacancy materials. The first-order transition is maintained and the strength of the magnetic entropy change (Δs_m) was unchanged without degradation. For the Mn vacancy sample the decreased Mn-Mn atomic distance and strengthened covalent bonding can stabilize the high-temperature hexagonal phase, while for the Ni vacancy sample the decreased interatomic distances among different pairs (Mn-Ge, Mn-Mn and Mn-Ni) promote the stabilization of the low-temperature orthorhombic phase. Additionally, the introduced vacancy defects have directly been observed through HAADF-STEM. Positron annihilation results clarified the mono-vacancy nature for these vacancies, and indicate that the Ni positions around the Ni vacancies could partially be occupied by Mn atoms. Our study reveals that introducing atomic vacancy defects can effectively regulate the magnetocaloric properties and provide important fundamental insights into defect engineering of Mc-MCMs.

Compared with traditional techniques, solid-state magnetocaloric phase transition materials (MPTMs), based on the giant magnetocaloric effect (GMCE), can achieve a higher energy conversion efficiency for caloric applications. As one of the most promising MPTMs, the hexagonal (Mn,Fe)₂(P,Si)-based compounds host some advantages, but the existing hysteresis and relatively unstable GMCE properties need to be properly tackled. In this study, it is found that substitutions with Ni, Pd, and Pt can maintain and even enhance the GMCE (≈8.7% maximum improvement of |Δs_m|). For a magnetic field change of Δμ₀H = 2 T, all samples obtain a |Δs_m| in the range of 20–25 J kg⁻¹ K⁻¹ with a low thermal hysteresis ΔT_hys (≤5.6 K). The performance surpasses almost all other (Mn,Fe)₂(P,Si)-based materials with ΔT_hys (<10 K) reported until now. The occupancy of substitutional Ni/Pd/Pt atoms is determined by X-ray diffraction, neutron diffraction, and density functional theory calculations. The difference in GMCE properties upon doping is understood from the competition between a weakening of the magnetic exchange interactions and the different degrees of orbital hybridization among 3d-4d-5d elements. The studies elaborate on the responsible mechanism and provide a general strategy through d-block doping to further optimize the GMCE of this materials family.

Cycling stability of the photochromic effect in rare-earth oxyhydride thin films is of great importance for long-term applications such as smart windows. However, an increasingly slower bleaching rate upon photochromic cycling was found in yttrium oxyhydride thin films; the origin of this memory effect is yet unclear. In this work, the microstructural changes under six photodarkening-bleaching cycles in YHxOy and GdHxOy thin films are investigated by in situ illumination Doppler broadening positron annihilation spectroscopy, complemented by positron annihilation lifetime spectroscopy (PALS) investigations on YHxOy films before and after one cycle. For the first three cycles, the Doppler broadening S parameter after bleaching increases systematically with photodarkening-bleaching cycle, and correlates with the bleaching time constant extracted from optical transmittance measurements. This suggests that the microstructural evolution that leads to progressively slower bleaching involves vacancy creation and agglomeration. PALS suggests that during a photodarkening-bleaching cycle, divacancies are formed that are possibly composed of illumination-induced hydrogen vacancies and preexisting yttrium monovacancies, and vacancy clusters grow, which might be due to local removal of hydrogen. If bleaching is a diffusion-related process, the formed vacancy defects induced by illumination might affect the diffusion time by reducing the diffusion coefficient. Hydrogen loss could also be a key factor in the reduced bleaching kinetics. Other microstructural origins including domain growth, or formation of OH- hydroxide groups, are also discussed with respect to the slower bleaching kinetics. During the fourth to sixth photodarkening-bleaching cycle, reversible shifts in the Doppler S and W parameters are seen that are consistent with the reversible formation of metallic-like domains, previously proposed as a key factor in the mechanism for the photochromic effect.

Recently, the all-d-metal Ni(Co)MnTi based Heusler compounds are found to have a giant magnetocaloric effect (GMCE) near room temperature and manifest different functionalities like multicaloric effects, which can be employed for solid-state refrigeration. However, in comparison to other traditional Heusler compounds, the relatively large thermal hysteresis (ΔT_hys) and moderately steep ferromagnetic phase transition provides limitations for real applications. Here, we present that fast solidification (suction casting) can sufficiently tailor the GMCE performance by modifying the microstructure. Compared with the arc-melted sample, the magnetic entropy change of the suction-casted sample shows a 67% improvement from 18.4 to 29.4 Jkg⁻¹K⁻¹ for a field change (∆μ₀H) of 5 T. As the thermal hysteresis has maintained a low ΔT_hys value (5.5 K) for the enhanced first-order phase transition, a very competitive reversible magnetic entropy change of 21.8 Jkg⁻¹K⁻¹ for ∆μ₀H = 5 T is obtained. Combining high-resolution transmission electron microscopy (HRTEM) and positron annihilation spectroscopy (PAS) results, the difference in lattice defect concentration is found to be responsible for the significant improvement in GMCE for the suction-cast sample, which suggests that defect engineering can be applied to control the GMCE. Our study reveals that fast solidification can effectively regulate the magnetocaloric properties of all-d-metal NiCoMnTi Heusler compounds without sacrificing ΔT_hys.

Rare-earth (RE) oxyhydride thin films show a color-neutral, reversible photochromic effect at ambient conditions. The origin of the photochromism is the topic of current investigations. Here, we investigated the lattice defects, electronic structure, and crystal structure of photochromic YHxOy and GdHxOy thin films deposited by magnetron sputtering using positron annihilation techniques and X-ray diffraction, in comparison with Y, YH∼1.9, Y2O3, Gd, GdH∼1.8, and Gd2O3 films. Positron annihilation lifetime spectroscopy (PALS) reveals the presence of cation monovacancies in the as-deposited Y and YH∼1.9 films at concentrations of ∼10-5 per cation. In addition, vacancy clusters and nanopores are found in the as-prepared YHxOy and Y2O3 films. Doppler broadening positron annihilation spectroscopy (DB-PAS) of the Y- A nd Gd-based films reflects the transition from a metallic to an insulating nature of the RE metal, metal hydride, semiconducting oxyhydride and insulating oxide films. In-situ illumination DB-PAS shows the irreversible formation predominantly of di-vacancies, as PALS showed that cation mono-vacancies are already abundantly present in the as-prepared films. The formation of di-vacancies supports conjectures that H-(and/or O2-) ions become mobile upon illumination, as these will leave anion vacancies behind, some of which may subsequently cluster with cation vacancies present. In addition, in RE oxyhydride films, partially reversible shifts in the Doppler parameters are observed that correlate with the photochromic effect and point to the formation of metallic domains in the semiconducting films. Two processes are discussed that may explain the formation of these metallic domains and the changes in optical properties associated with the photochromic effect. The first process considers the reversible formation of metallic nanodomains with reduced O: H composition by transport of light-induced mobile hydrogen and local oxygen displacements. The second process considers metallic nanodomains resulting from the trapping of photoexcited electrons in an eg orbital at the yttrium ions surrounding positively charged hydrogen vacancies that are formed by light-induced removal of hydrogen atoms from octahedral sites. When a sufficiently large concentration, on the order of ∼10%, is reached in a certain domain of the film, band formation of the eg electrons may occur, leading to an Anderson-Mott insulator-metal transition like the case of yttrium trihydride in these domains.

The energy axes of the RBS and ERD data (contained in Figures 2a,b,d,e, and S4) were originally underestimated, and the corrected figures appear below and in the Supporting Information. The change is in the conversion from raw data to the energy scale, which was initially converted incorrectly. The rescaled x-axis does not change the data conclusions since the assignment of peaks to atoms remains the same and the intensity of the peaks is unaffected. Hence, it has no influence on the calculations and conclusions in the original text. (Figure presented).

The quarternary (Mn,Fe)₂(P,Si)-based materials with a giant magnetocaloric effect (GMCE) at the ferromagnetic transition T_C are promising bulk materials for solid-state magnetic refrigeration. In the present study we demonstrate that doping with the light elements fluorine and sulfur can be used to adjust T_C near room temperature and tune the magnetocaloric properties. For F doping the first-order magnetic transition (FOMT) of Mn_0.60Fe_1.30P_0.64Si_0.36F_x (x = 0.00, 0.01, 0.02, 0.03) is enhanced, which is explained by an enhanced magnetoelastic coupling. The magnetic entropy change |ΔS_m| at a field change (Δμ₀H) of 2 T markedly improved by 30% from 14.2 Jkg⁻¹K⁻¹ (x = 0.00) at 335 K to 20.2 Jkg⁻¹K⁻¹ (x = 0.03) at 297 K. For the F doped material the value of |ΔS_m| for Δμ₀H = 1 T reaches 11.6 Jkg⁻¹K⁻¹ at 294 K, which is consistent with the calorimetric data (12.4 Jkg⁻¹K⁻¹). Neutron diffraction experiments reveal enhanced magnetic moments by F doping in agreement with the prediction of DFT calculation. For S doping in Mn_0.60Fe_1.25P_0.66-ySi_0.34S_y (y = 0.00, 0.01, 0.02, 0.03, 0.04) three impurity phases have been found from microstructural analysis, which reduce the stability of the FOMT in the main phase and decrease T_C, e.g. the |ΔS_m| reduces from 7.9(12.6) Jkg^-1K^-1 (332 K) for the undoped sample to 3.4(6.2) Jkg^-1K^-1 (313 K) for the maximum doped sample for Δμ₀H = 1(2) T. Neutron diffraction experiments combined with first-principles theoretical calculation, distinguish the occupation of F/S dopants and the tuning mechanism for light element doping, corresponding to subtle structural changes and a strengthening of the covalent bonding between metal and metalloid atoms. It is found that the light elements F and S can effectively regulate the magnetocaloric properties and provide fundamental understanding of (Mn,Fe)₂(P,Si)-based intermetallic compounds.

To develop an understanding of the photochromic effect in rare-earth metal oxyhydride thin films (REH3-2xOx, here RE = Y), we explore the aliovalent doping of the RE cation. We prepared Ca-doped yttrium oxyhydride thin films ((CazY1-z)HxOy) by reactive magnetron cosputtering with Ca doping concentrations between 0 and 36 at. %. All of the films are semiconductors with a constant optical band gap for Ca content below 15%, while the band gap expands for compositions above 15%. Ca doping affects the photochromic properties, resulting in (1) a lower photochromic contrast, likely due to a lower H- concentration, and (2) a faster bleaching speed, caused by a higher pre-exponential factor. Overall, these results point to the importance of the H- concentration for the formation of a "darkened"phase and the local rearrangement of these H- for the kinetics of the process.