The scalability and power of quantum computing architectures depend critically on high-fidelity operations and robust and flexible qubit connectivity^{1, 2–3}. In this respect, mobile qubits are particularly attractive as they enable dynamic and reconfigurable qubit arrays. This approach allows quantum processors to adapt their connectivity patterns during operation, implement different quantum error correction codes on the same hardware and optimize resource use through dedicated functional zones for specific operations such as measurement or entanglement generation^{4, 5, 6–7}. Such flexibility also relieves architectural constraints, as recently demonstrated in atomic systems based on trapped ions^4,5 and neutral atoms manipulated with optical tweezers^6,7. In solid-state platforms, highly coherent shuttling of electron spins was recently reported^8,9. A key outstanding question is whether it may be possible to perform quantum gates directly on the mobile spins. Here we demonstrate two-qubit operations between two electron spins carried towards each other in separate travelling potential minima in a semiconductor device. We find that the interaction strength is highly tunable by their spatial separation. When we shuttle the two spins towards the centre by 120 nm each for a total displacement of 240 nm, we achieve an average two-qubit gate fidelity of about 99%. Furthermore, we implement conditional post-selected quantum state teleportation between qubits separated by 320 nm with an average gate fidelity of 87%, showcasing the potential of mobile spin qubits for non-local quantum information processing. We expect that operations on mobile qubits will become a universal feature of future large-scale semiconductor quantum processors.

Micromagnet-enabled electric-dipole spin resonance (EDSR) is an established method for high-fidelity single-spin control in silicon, although so far experiments have been restricted to one-dimensional arrays. In contrast, qubit control based on hopping spins has recently emerged as a compelling alternative, with high-fidelity baseband control realized in sparse two-dimensional hole arrays in germanium. In this work, we commission a ²⁸Si/SiGe 2 × 2 quantum dot array both as a four-qubit device using EDSR and as a two-qubit device using baseband hopping control. We establish a lower bound on the fidelity of the hopping gate of 99.50(6)%, which is similar to the average fidelity of the resonant gate. The hopping gate also circumvents the transient pulse-induced resonance shift from heating observed during EDSR operation. To motivate hopping spins as an attractive means of scaling silicon spin-qubit arrays, we propose an extensible nanomagnet design that enables engineered baseband control of large spin arrays.

The computational power and fault tolerance of future large-scale quantum processors derive in large part from the connectivity between the qubits. One approach to increase connectivity is to engineer qubit–qubit interactions at a distance. Alternatively, the connectivity can be increased by physically displacing the qubits. For semiconductor spin qubits, several studies have investigated spin coherent shuttling of individual electrons, but high-fidelity transport over extended distances remains to be demonstrated. Here we report shuttling of an electron inside an isotopically purified Si/SiGe heterostructure using electric gate potentials. In a first set of experiments, we form static quantum dots and study how spin coherence decays during bucket-brigade shuttling, where we repeatedly move a single electron between up to five dots. Next, for conveyor-mode shuttling, we create a travelling-wave potential, formed with either one or two sets of sine waves, to transport an electron in a moving quantum dot. This method shows a spin coherence an order of magnitude better than the bucket-brigade shuttling. It allows us to displace an electron over an effective distance of 10 μm in under 200 ns while preserving the spin state with a fidelity of 99.5% on average. These results will guide future efforts to realize large-scale semiconductor quantum processors, making use of electron shuttling both within and between qubit arrays.

Semiconductor spin qubits have emerged as a promising platform for quantum computing, following a significant improvement in their control fidelities over recent years. Increasing the qubit count remains challenging, beginning with the fabrication of small features and complex fan-outs. A particular challenge has been formed by the need for individual barrier gates to control the exchange interaction between adjacent spin qubits. Here, we propose a method to vary two-qubit interactions without applying pulses on individual barrier gates while also remaining insensitive to detuning noise in first order. Experimentally we find that changing plunger gate voltages over 300 mV can tune the exchange energy J from 100 kHz to 60 MHz. This allows us to perform two-qubit operations without changing the barrier gate voltage. Based on these findings we conceptualize a spin qubit architecture without individual barrier gates, simplifying the fabrication while maintaining the control necessary for universal quantum computation.