The high field transport characteristics of nanostructured transistors based on layered materials are not only important from a device physics perspective but also for possible applications in next generation electronics. With the growing promise of layered materials as replacements to conventional silicon technology, the high current density properties of the layered material titanium trisulfide (TiS3) are studied here. The high breakdown current densities of up to 1.7 × 106 A cm−2 are observed in TiS3 nanoribbon-based field-effect transistors, which are among the highest found in semiconducting nanomaterials. Investigating the mechanisms responsible for current breakdown, a thermogravimetric analysis of bulk TiS3 is performed and the results with density functional theory and kinetic Monte Carlo calculations are compared. In conclusion, the oxidation of TiS3 and subsequent desorption of sulfur atoms play an important role in the electrical breakdown of the material in ambient conditions. The results show that TiS3 is an attractive material for high power applications and lend insight into the thermal and defect activated mechanisms responsible for electrical breakdown in nanostructured devices.@en

We studied the electron-transport properties of ten different amino acids and one dimer (di-methionine) using the mechanically controlled break-junction (MCBJ) technique. For methionine and cysteine, additional measurements were performed with the scanning tunneling microscope break-junction (STM-BJ) technique. By means of a statistical clustering technique, we identified several conductance groups for each of the molecules considered. Ab initio calculations revealed that the observed broad conductance distribution stems from the possibility of various binding geometries which can be formed during stretching combined with a multitude of possible conformational changes. The results suggest that it would be helpful to explore different experimental techniques such as recognition tunneling and conditions to help identify the nature of amino-acid-based junctions even further, for example, with the goal to establish a firm platform for their unambiguous recognition by tunneling break-junction experiments.@en

The ability to exfoliate layered materials down to the single layer limit has presented the opportunity to understand how a gradual reduction in dimensionality affects the properties of bulk materials. Here we use this top-down approach to address the problem of superconductivity in the two-dimensional limit. The transport properties of electronic devices based on 2H tantalum disulfide flakes of different thicknesses are presented. We observe that superconductivity persists down to the thinnest layer investigated (3.5 nm), and interestingly, we find a pronounced enhancement in the critical temperature from 0.5 to 2.2 K as the layers are thinned down. In addition, we propose a tight-binding model, which allows us to attribute this phenomenon to an enhancement of the effective electron-phonon coupling constant. This work provides evidence that reducing the dimensionality can strengthen superconductivity as opposed to the weakening effect that has been reported in other 2D materials so far.@en

The fabrication of van der Waals heterostructures, artificial materials assembled by individual stacking of 2D layers, is among the most promising directions in 2D materials research. Until now, the most widespread approach to stack 2D layers relies on deterministic placement methods, which are cumbersome and tend to suffer from poor control over the lattice orientations and the presence of unwanted interlayer adsorbates. Here, we present a different approach to fabricate ultrathin heterostructures by exfoliation of bulk franckeite which is a naturally occurring and air stable van der Waals heterostructure (composed of alternating SnS 2-like and PbS-like layers stacked on top of each other). Presenting both an attractive narrow bandgap (<0.7 eV) and p-type doping, we find that the material can be exfoliated both mechanically and chemically down to few-layer thicknesses. We present extensive theoretical and experimental characterizations of the material's electronic properties and crystal structure, and explore applications for near-infrared photodetectors.@en

We report on the large-scale synthesis of highly oriented ultrathin MoO3 layers using a simple and low-cost atmospheric pressure, van der Waals epitaxy growth on muscovite mica substrates. By this method, we are able to synthesize high quality centimeter-scale MoO3 crystals with thicknesses ranging from 1.4 nm (two layers) up to a few nanometers. The crystals can be easily transferred to an arbitrary substrate (such as SiO2) by a deterministic transfer method and be extensively characterized to demonstrate the high quality of the resulting crystal. We also study the electronic band structure of the material by density functional calculations. Interestingly, the calculations demonstrate that bulk MoO3 has a rather weak electronic interlayer interaction, and thus, it presents a monolayer-like band structure. Finally, we demonstrate the potential of this synthesis method for optoelectronic applications by fabricating large-area field-effect devices (10 μm × 110 μm in lateral dimensions) and find responsivities of 30 mA W-1 for a laser power density of 13 mW cm-2 in the UV region of the spectrum and also as an electron acceptor in a MoS2-based field-effect transistor.@en

We report on the large-scale synthesis of highly oriented ultrathin MoO3 layers using a simple and low-cost atmospheric pressure, van der Waals epitaxy growth on muscovite mica substrates. By this method, we are able to synthesize high quality centimeter-scale MoO3 crystals with thicknesses ranging from 1.4 nm (two layers) up to a few nanometers. The crystals can be easily transferred to an arbitrary substrate (such as SiO2) by a deterministic transfer method and be extensively characterized to demonstrate the high quality of the resulting crystal. We also study the electronic band structure of the material by density functional calculations. Interestingly, the calculations demonstrate that bulk MoO3 has a rather weak electronic interlayer interaction, and thus, it presents a monolayer-like band structure. Finally, we demonstrate the potential of this synthesis method for optoelectronic applications by fabricating large-area field-effect devices (10 μm × 110 μm in lateral dimensions) and find responsivities of 30 mA W-1 for a laser power density of 13 mW cm-2 in the UV region of the spectrum and also as an electron acceptor in a MoS2-based field-effect transistor.@en

Break-junction techniques provide the possibility to study electric and thermoelectric properties of single-molecule junctions in great detail. These techniques rely on the same principle of controllably breaking metallic contacts in order to create single-molecule junctions, whilst keeping track of the junction's conductance. Here, we compare results from mechanically controllable break junction (MCBJ) and scanning tunneling microscope (STM) methods, while characterizing conductance properties of the same novel mechanosensitive para- and meta-connected naphtalenophane compounds. In addition, thermopower measurements are carried out for both compounds using the STM break junction (STM-BJ) technique. For the conductance experiments, the same data processing using a clustering analysis is performed. We obtain to a large extent similar results for both methods, although values of conductance and stretching lengths for the STM-BJ technique are slightly larger in comparison with the MCBJ. STM-BJ thermopower experiments show similar Seebeck coefficients for both compounds. An increase in the Seebeck coefficient is revealed, whilst the conductance decreases, after which it saturates at around 10 μV K−1. This phenomenon is studied theoretically using a tight binding model. It shows that changes of molecule-electrode electronic couplings combined with shifts of the resonance energies explain the correlated behavior of conductance and Seebeck coefficient.@en