Resilience assessment and management of technical systems have been increasingly important as the current applications in the process industries are becoming more complex. Several review papers on resilience management methods and applications have been published by researchers from different aspects. However, none of them put the focus on bibliometric analysis of the relevant research works especially those in the process industries. This study pays attention to system resilience assessment and management, by reviewing sources of relevant publications, collaboration of institutions and authors, and development trends. In addition, the development of resilience engineering and management is further investigated through analyzing the most influential and relevant journals of process safety and environmental protection. This review provides valuable information regarding knowledge structure, evolution and influential publications, and high-level insights for future research.@en

As an important consideration in the chemical industry, chemical process safety has received notable attention in China. However, catastrophic chemical accidents still occur. To better understand why accidents continue to occur, this paper presented a diagnostic analysis of 14 major chemical accidents in China from 2012 to 2022 based on VOSviewer software. The authors analysed the correlation between the accident causation and their relationship with the safety management elements. The study observed that inferior process safety culture, intentional violation (rule-breaking) of procedure, inadequate safety training, and illegal operations were the most frequent causes of accidents. These causes highlighted the prominent gaps in PSM in China in the process safety culture, compliance with standards, the conduct of operations, process safety competency, and training & performance assurance. The results based on co-occurrence analysis indicated a strong correlation between these gaps in PSM. Enterprises should pay attention to collaborative management among them. These deficiencies in the enterprise's PSM system showed that the essential defects in China's chemical industry are a poor safety culture, inadequate accident investigation, inadequate training, and a lack of chemical safety personnel. The study recommended that the chemical industry establish superior process safety culture and competency for all personnel, monitor leading and lagging process safety indicators, apply inherent safety, and practice advanced safety management concepts. We hope that the findings can provide China's perspectives and strengths for global chemical safety.@en

It is well known that safety climate (SC) has paramount significance in safety science and accident prevention. In this paper, a bibliometric data mining is conducted to systematically review the research domain of SC. Overall, 1624 documents on SC are obtained, covering 4830 authors, 473 journals, 89 countries/regions, and 1766 institutions between 1980 and 2021. SC has obtained increasing attention since the number of publications related to SC grew from 1 in 1980 to 188 in 2020. Based on the bibliometric data, network analysis was carried out to understand the relationship among different countries/regions, authors, and keywords. Safety Science, Journal of Safety Research, and Accident Analysis and Prevention are the major sources of SC publications, and the USA, Australia, and China lead scientific collaboration production on SC research. Then, text mining of publication keywords is used to identify the hot topics and the evolution of mainstream research over time in the SC domain. The dominant topics in SC research include culture, performance, safety behavior, and model. Meanwhile, the limitations of past research on SC are analyzed and the differences between SC and safety culture are discussed. Moreover, recommendations for future research on SC are also given based on the results of bibliometric analysis and existing literature reviews.@en

Domino accidents are typical low-frequency and high-consequence events in chemical process industries. Applying quantitative risk assessment (QRA) in domino accident assessment is challenging due to the uncertainties in the escalation process. Meanwhile, the outcomes of QRA are subject to a certain degree of unreliability due to the inappropriate representation of uncertainty. This paper reviews the literature in the field of QRA of domino accidents that may happen in the chemical process industries. Firstly, the sources of uncertainty in risk assessment of domino effects are identified and categorized based on a fundamental structure of uncertainty and a QRA framework. Furthermore, the current methodologies and approaches applied for handling various uncertainties (input uncertainty, model parameter uncertainty, and model structure uncertainty) in the QRA related to domino effects are reviewed. Based on the literature review results, current challenges with respect to uncertainty handling in QRA of domino accidents are discussed, and recommendations for future research are given before the conclusions are presented. This study helps researchers to get insights into the interface between uncertainty fundamentals and the QRA framework and the current status of uncertainty handling in the QRA of domino effects. Furthermore, this study promotes the development of new approaches for handling uncertainty in domino accident analysis.@en

This article presents an application-specific integrated circuit (ASIC) for catheter-based 3-D ultrasound imaging probes. The pitch-matched design implements a comprehensive architecture with high-voltage (HV) transmitters, analog front ends, hybrid beamforming analog-To-digital converters (ADCs), and data transmission to the imaging system. To reduce the number of cables in the catheter while maintaining a small footprint per element, transmission (TX) beamforming is realized on the chip with a combination of a shift register (SR) and a row/column (R/C) approach. To explore an additional cable-count reduction in the receiver part of the design, a channel with a combination of time-division multiplexing (TDM), subarray beamforming, and multi-level pulse amplitude modulation (PAM) data transmission is also included. This achieves an 18-fold cable-count reduction and minimizes the power consumption in the catheter by a load modulation (LM) cable driver. It is further explored how common-mode interference can limit beamforming gain and a strategy to reduce its impact with local regulators is discussed. The chip was fabricated in TSMC 0.18-m HV BCD technology and a 2-D PZT transducer matrix of 16 × 18 elements with a pitch of 160 m and a center frequency of 6 MHz was manufactured on the chip. The system can generate all required TX patterns at up to 30 V, provides quick settling after the TX phase, and has an reception (RX) power consumption of only 1.12 mW/element. The functionality and operation of up to 1000 volumes/s have been demonstrated in electrical and acoustic imaging experiments.@en

Fire-induced domino effect is one of the main threats to hazardous material storage tanks, and many attempts have been conducted to assess the vulnerability of storage tanks exposed to fire to evaluate domino effect risk. However, past research ignored the influence of wind load on the thermal buckling behavior of storage tanks exposed to fire, which may underestimate the risk of exposed tanks. This paper thus conducts a numerical simulation of the thermal buckling behavior of steel vertical dome storage tanks under the synergistic effect of static wind loads and thermal effects. The effects of wind parameters and heat radiation parameters on the thermal post-buckling behavior and the time to failure (ttf) of storage tanks are investigated to analyze the synergistic effects of fire and wind loads. By comparing the circumferential and meridional stresses before and after the thermal post-buckling stage, it is found that under the disturbing effect of the positive wind pressure load, the thermal post-buckling of the tanks on downwind occurs earlier and more severe. Besides, the effects of wind angle, fire location height, and diameter on buckling damage were investigated. The comparative analysis of different scenarios shows that the tanks in the windy scenario are more prone to thermal post-buckling, and the deformation is intensified, with an increased likelihood of failure.@en

Effective firefighting and evacuation are integral parts of emergency response plans in process plants, which play a key role in protecting human lives and assets in the event of major fires. Given sufficient firefighting resources, firefighters would suppress all the burning vessels and cool off all the exposed vessels in order to contain the fire and prevent a fire-induced domino effect. However, when the number of critical units—whether on fire or exposed to fire—exceeds the firefighting resources, firefighters should decide how to optimally allocate the resources so as to best satisfy the safety goals. To facilitate such decisions, the present work aims to develop a methodology for effective firefighting under insufficient resources. The methodology seeks out two safety goals via optimal firefighting strategies: (1) providing for the safety of evacuees, and (2) reducing the risk of domino effects. Although both safety goals are attempted to be satisfied at the same time, a higher priority is assigned to the first goal as long as the evacuation is underway. When the evacuation is complete, all the resources are focused on the second goal. The study shows that a multi-objective optimization approach to identifying firefighting plans outdoes single-objective optimization approaches in that several safety goals could be met at once. Although only two safety goals are considered in the present study, the methodology is flexible enough to accommodate several goals such as safety of offsite people and assets.@en

Toxic gas leakage represents a type of major process accident scenario threatening human life. Technical and non-technical safety barriers are employed to prevent toxic gas leakage accidents or mitigate the possible catastrophic consequences. Evacuation must be executed in severe toxic gas release scenarios. The performance assessment of technical safety barriers and evacuations in these accident scenarios, although very important, has never been investigated in previous studies. This paper proposes an approach integrating event tree analysis (ETA), computational fluid dynamics (CFD) simulation, and evacuation modeling (EM), for risk assessment of toxic gas leakage accidents in chemical plants. In the proposed approach, the spatiotemporal distribution of toxic gas is predicted by CFD simulations. A dynamic evacuation is determined by a cellular automaton (CA)-based model. Synergistic interventions resulting from technical safety barriers and evacuations are considered in the risk assessment. Considering safety barrier failures in the event tree analysis, individual fatality risks due to toxic gas leakage scenarios are calculated. For illustrative purposes, the proposed method is applied to a case of ammonia leakage. The results show that worse scenarios would be ignored without considering the failure probabilities of technical safety barriers, which can cause underestimated individual fatality risks. Timely gas detection & alarm has the potential to expedite the starting time of evacuations and thus may shorten the time that evacuees stay in the toxicity area to reduce individual fatality risks.@en