Physics-based compact models for emerging non-volatile memories (NVMs) are often limited by the complex interactions of microscopic domains and defects that are difficult to capture analytically, resulting in reduced accuracy and simulation efficiency. To address this challenge, a machine learning (ML)-based approach is proposed using artificial neural networks (ANNs) trained entirely on device measurement data, enabling a direct translation of fabrication characteristics into SPICE-compatible circuit models. The resulting models achieve high accuracy (MSE: 0.724, adjusted R² : 0.998), significantly outperforming physics-based baselines with an 18× lower MSE for polarization and a two-order-of-magnitude precision improvement in FeFET current simulation, while accurately capturing the wake-up process. Furthermore, the model demonstrates robust out-of-distribution (OOD) extrapolation to unseen ferroelectric thicknesses and a 33.7% improvement in simulation speed. These results validate the ML-based approach as a highly efficient, SPICE-compatible solution for next-generation memory.

Addressing non-idealities in Resistive Random Access Memories (RRAMs) is crucial for their successful commercialization. For example, the inherent resistance drift that occurs during consecutive read operations can induce Read Disturb Faults (RDF), leading to functional errors. This paper analyzes and characterizes the resistance drift and the RDF based on data measurements and presents a physics-based RRAM compact model that incorporates these non-idealities. Additionally, an in-field mitigation scheme is proposed, leveraging bidirectional read operations to balance the resistance. The scheme is implemented and validated through circuit simulations, both for RRAM used as memory and for RRAM-based computation-in-memory microarchitectures for deep neural networks. The results demonstrate that RRAM without any mitigation scheme can start failing after 8,000 consecutive reads, while our mitigation scheme ensures that the memory remains functional even after 10⁶ consecutive reads. Furthermore, the results indicate that using the MNIST dataset as a case study, the accuracy can drop significantly from 86% to as low as 12.5% without any mitigation scheme. In contrast, the proposed mitigation scheme improves this accuracy up to 84.2%.

Ferroelectric Field-Effect Transistors (FeFETs) are promising candidates for non-volatile memory (NVM) technologies, especially in embedded systems and edge computing. However, due to their physical characteristics, FeFETs exhibit unique defects—such as Threshold Voltage Shifting (TVS) caused by trap charges in the oxide layer—that are not captured by conventional defect models. This study adopts the Device-Aware Test (DAT) methodology to model these defects by incorporating their impact into the electrical parameters, calibrated using measurement data. Defect injection, circuit-level simulations, and fault analysis are performed to derive realistic fault models. Finally, the March algorithm and Design-for-Test (DfT) techniques are proposed to effectively detect these defects.

The development of Ferroelectric Field-Effect Transistor (FeFET) manufacturing requires high-quality test solutions, yet research on FeFET testing is still in a nascent stage. To generate a dedicated test method for FeFETs, it is critical to have a deep understanding of manufacturing defects and accurately model them. In this work, we introduce the unique defect, Anomalous Charge Trapping (ACT), in FeFETs. The ACT-defective FeFET is characterized, and the physical mechanism of the defect is explained. Then, we apply the Deviceaware Test (DAT) method to design a specific ACT-defective FeFET model, which includes the physical impact of the defect on the electrical parameters of defect-free models, and calibrate the model with measurement data. Fault modeling is performed based on circuit-level simulations, and dedicated test solutions are proposed.

As emerging non-volatile memory (NVM) devices, Ferroelectric Field-Effect Transistors (FeFETs) present distinctive opportunities for the design of ultra-dense and low-leakage memory systems. For matured FeFET manufacturing, it is extremely important to have an understanding of manufacturing defects and accurately model them to develop effective test solutions. This paper introduces a comprehensive framework for defect and fault modeling, which enables the development of test solutions. First, a classification of FeFET manufacturing defects is provided; both conventional defects (such as contacts and interconnect defects) as well as unique FeFET defects are discussed. The latter FeFET specific defect leads to unique faults that cannot be adequately described using traditional modeling approaches. Then, the Device-Aware Test (DAT) method is used to effectively and appropriately model, analyze and develop test solutions for such unique defects; the approach will be illustrated for Stuck-at-Polarization (SAP) defects.