CW

C. Wehrmann

info

Please Note

33 records found

Assessing narrative-shift potential in mobility-focused urban living labs

Mobility transitions are shaped not only by infrastructure, technology and policy, but also by narratives: shared understandings, in this case about what forms of mobility are considered normal, desirable, feasible and acceptable. These days, dominant mobility narratives are often car-centred, which can limit the adoption of more sustainable mobility practices. Urban living labs may offer conditions in which alternative mobility narratives can be experienced, discussed and developed, because they combine real-world experimentation, local embedding, stakeholder collaboration and participant involvement. However, it remains unclear how the narrative-shift potential of mobility-focused urban living labs can be assessed or strengthened in practice.
This thesis investigates how the narrative-shift potential of mobility-focused urban living labs can be assessed and translates this into a practical design-support tool for organisers. Narrative-shift potential is defined as the extent to which a living lab contains theoretically grounded design conditions that may support participants or relevant actors in engaging with, reflecting on and possibly adopting or diffusing an alternative mobility narrative. The thesis does not measure actual participant-level narrative change.
The thesis consists of two main sections: a research and design section. The research section is aimed at answering the research question: “How can the narrative-shift potential of mobility-focused urban living labs be assessed?”. The design section is aimed at answering the design question: “How can the assessment of narrative-shift potential be translated into a practical design-support tool for organisers of mobility-focused urban living labs?”.
The research combines a targeted literature review, rubric development and qualitative multiple-case study analysis. Literature on mobility narratives, narrative persuasion and urban living labs is synthesised into six mechanisms associated with narrative-shift potential: deep immersion, reflexivity, participatory approach, socio-spatial relevance, network nurturing and social network inclusion. These mechanisms are operationalised into a ULL characterisation rubric and applied to three real-world cases: GEMINI, ALTHEA and sCOOL2walk.
The analysis shows that across cases, socio-spatial relevance, deep immersion and network nurturing are relatively strong, while reflexivity and social network inclusion are less deliberately developed. This suggests that mobility-focused urban living labs may already contain implicit narrative-shift potential, but that this potential is not always intentionally recognised or designed for.
The design phase translates these findings into the ULL Optimisation Tool, consisting of a ULL framing canvas, assessment rubric, mechanism prompt cards and optimisation canvas. A validation step led to the addition of a living lab fit check, a clearer distinction between target groups, users and enabling actors, and an explicit access check before participant-facing interventions are selected. The final output is a workshop-based tool that helps organisers define the intended narrative shift, assess mechanism expression, prioritise improvement opportunities and translate them into design interventions.
The tool helps organisers make narrative-shift potential explicit and identify context-specific opportunities for strengthening it. The thesis contributes a theoretically grounded and practically usable approach for assessing and designing conditions associated with narrative-shift potential in mobility-focused urban living labs. ...

A case study of the unique challenges with implementing structured expert elicitation for projecting policy effects

Master thesis (2026) - T.K. Bolhuis, C. Wehrmann, Eva Kalmár, Shruti Setty, G.F. Nane, J. van Keulen
Expert opinions are crucial to quantify unknown variables when it is not feasible to use traditional research methods (limited resources or questions about future values). Implementing structured expert elicitation (SEE) is important for the quality and credibility of assumptions made by these experts or the researchers who enlist them. However, application in practice has been limited.

When research is performed to project policy effects, the context is so volatile that the accuracy of experts' judgements cannot be validated. Moreover, experts may focus on quantifying uncertainty while ignoring extreme uncertainties (war, future technological inventions), operating from a status quo point of view, in order to support the policy relevance of their research. This leads to a unique context of the expert judgement process. It is unclear how experts address expert judgement in this practice. Moreover, it is not yet known what problems may limit application of SEE protocols in this context.

I worked with the PBL Netherlands Environmental Assessment Agency to evaluate their expert judgement process for the KEV (The Climate and Energy Outlook). On a yearly basis their (sector) experts are required to judge dozens of uncertain variables for the projections of the progress on climate and energy goals. This includes policy effects, external factors like weather, and also scientific uncertainties like the inherent uncertainty of the models that are used for the projections.

How can practitioners in the policy research field be supported in implementing structured expert elicitation to improve their expert judgement?

To answer this research question and address it through communication design, I followed the Double Diamond method for design-based research (Discover-Define-Develop-Deliver). For the duration of a year, I was an intern at PBL, allowing me to observe and discuss their methodology, while inquiring after what problems they face. I helped organise a pilot for implementation of the IDEA protocol for structured expert elicitation. To evaluate this pilot I designed a focus group session with all different actors involved in the KEV project. Next, to discuss challenges and develop possible solutions I organised a co-design workshop with (sector) experts from different teams that work on the KEV.

The results show that experts face several unique challenges in their expert judgement process, which are not directly addressed by SEE protocols. The IDEA protocol shows promise to improve quality of judgements and transparency through increased documentation. However, the protocol lacks support experts say they require to select what uncertainties to address in their research, as well as adequate support to quantify their uncertainty interval.

Siloed teams lead to diverging methodology and definitions, as well as missing overall problem demarcation. Because there is limited opportunity for feedback on the accuracy of experts' judgements, there is no universal measure of what makes a judgement 'good'.

To address the problems faced by the practitioners at PBL, I designed an instructional video. It informs experts about SEE and provides tangible examples and actionable steps the practitioners can take on the short and long term, on the individual and organisational level. This provides the researchers with the knowledge and control to improve their own practice. At the same time, the video also acknowledges the unique challenges the experts face and reassures them of the confidence they can have in their practice to make decisions. By targeting both teamleaders and sector experts, the facilitating party and the practicing party are involved and given agency in this process.

Therefore, research requiring expert judgement on policy uncertainties presents some unique challenges in the expert judgement process. When accuracy cannot be used as a measure of quality, it is important that the researchers invest in the credibility of the methodology. SEE can provide structure and transparency, but additional instructions and methods are needed to support experts to confidently make judgements that balance accuracy and information.

Though this case study focuses on a specific organisation and group of experts, the lessons learned from this study indicate a variety of challenges when applying SEE in different research domains and contexts. This could possible indicate the stagnated implementation in practice. Additionally, this research and the development of structured expert elicitation for policy assessment support credibility of expert judgement in this political environment. ...

Why fundamental findings are not translated to medical contexts, and how to optimize the translational activity in the neuroscience field

Master thesis (2025) - N. Germain, C. Wehrmann, É. Kalmár, J. van Keulen, A. Badura
Neurological disorders are the leading cause of disabilities and second leading cause of death worldwide. Important discoveries therefor have the potential to save or aid large patient populations. However, valorising this research in a way that leads to this societal impact is not without its obstacles. A lack of resources, a lack of awareness from researchers and institutions, and differences between fundamental and clinical researchers are often mentioned in the literature as bottlenecks limiting the translational activity.

For this study, semi structured interviews were held with researchers from varying backgrounds in either fundamental, translational or clinical neuroscience. Transcripts were coded using iterative coding strategies and analysed for common themes. Based on this analysis, it seems expertise regarding effective translational research is not widely available, collaborators are difficult to find, and resources are sometimes only available for those with interdisciplinary collaborators. There seems to be an interest among researchers in a professional body focussing on translation embedded within the research institute. This body would have a role in helping find collaborators, increasing crosstalk and connections between clinical and fundamental researchers, as well as serving as a source of expertise regarding best translational practises.

These organisations, often called intermediaries, are characterised through three main roles: the knowledge broker, the network manager, and the system transitioner. Based on these three roles and available literature, different intermediary organisations are discussed through a novel framework that builds upon existing models from different fields. Two case studies are used to validate the framework and further explore trade offs and strategic choices made during the founding of the organisation or transitioning to a new strategy. Interviews with experts involved in these organisations were held and used to compare these two organisations based on the proposed framework. Based on their relationship to bridging and bonding social capital, autonomy, and knowledge aggregation, a first proposal is made regarding the best approach for this translational intermediary.

This intermediary tasked with optimizing the translational activity in the neuroscience field should be tasked with collecting and maintaining knowledge, be a centralised organisations with strong ties with different researchers in the network, and function autonomously from any existing institution. ...

An overview from the current practice to implementation

Extreme weather events such as heat waves and heavy rainfall are becoming more frequent due to climate change, threatening the liveability of urban environments. High building and infrastructure densities and impervious surfaces intensify heat and flood risks. This vulnerability has led to an increase in climate adaptation strategies, which often include the implementation of Nature based Solutions (NbS). In the Netherlands, one of the most widely used NbS is the swale, a green ditch that facilitates drainage, infiltration, and rainwater storage. Swales are seen as cost-effective and no-regret measures that, just as other NbS, can have multiple functions which provide multiple benefits. Despite these potential benefits, practitioners struggle with the design, development and maintenance of swales, partly due to limited local monitoring practices.

The research had two main objectives: (1) to explore current practice in research and in Dutch municipalities to identify performance criteria and monitoring techniques for swales to track the key functions of swales, and (2) to investigate motivators and challenges for municipal swale monitoring and develop a communication tool to address these.
A systematic literature review identified five key swale functions: water quantity, water quality, biodiversity, liveability and wellbeing. Water quantity and water quality functions are relatively well studied, with swales proven to reduce runoff and remove certain pollutants when properly designed and maintained. However, research is still lacking for the functions biodiversity, liveability, and wellbeing. The connections between the different functions were also explored, which showed the importance of recognising the connections and the influences of the different functions on each other. From this review, eight criteria were identified: infiltration rate, soil moisture, in- and outflow of pollutants, soil quality, vegetation development, temperature, resident experience and resident usage. For each criterion, quick-scan and in-depth monitoring techniques were proposed.

A survey among municipal workers who are involved with urban water management (mainly from South Holland) found that swales are seen as multifunctional objects, where water quantity and biodiversity are the most important functions. Monitoring is not part of the current practice, and swales are often only assessed on the functions during the design. However, there is interest in the implementation of monitoring, especially for water quantity and water quality. The main motivators for monitoring are to know the effect of swales on the long term and the ability to identify problems in time. The main challenges are keeping track of data and ensuring sufficient resources, like staff and budget.

To overcome these challenges, a workshop was designed to motivate practitioners to start monitoring the multiple swale functions. The workshop is aimed at municipal staff responsible for the organisation of maintenance for the different functions. By learning about the different functions and monitoring possibilities, the participants can create a monitoring plan that serves as a starting point for the actual implementation of monitoring. Evaluation by experts indicated that this workshop can motivate the target audience, because it increases the audience's awareness of swales, encourages them to consider the different functions and lets them practice with measuring, monitoring and retrieving data. It also provides them with a concrete and practical output that can be used in practice.

This study offers a framework to improve swale monitoring in the Netherlands. An overview of performance criteria with corresponding monitoring techniques is provided together with a communication tool that can bridge the gap between knowledge and practice.
...

Development of an effective communication tool and strategy through qualitative research into triggers and barriers for electrical and electronic household appliance maintenance behaviors

Master thesis (2025) - E.L. Meershoek, C. Wehrmann, É. Kalmár, R. Mugge, Daniëlle Broeze, Roos Janssen
The European Union's European Green Deal targets climate neutrality by 2050, necessitating significant reductions in environmental impacts, which includes addressing the growing problem of electronic waste (E-waste). This thesis addresses the issue of the E-waste by focusing on extending the lifetime of electrical and electronic household appliances (EEA) through improving user maintenance behaviors. The main research question explores what an effective communication tool and strategy should entail in order to encourage better maintenance behavior among EEA users who are willing but not yet sufficiently active in performing the required maintenance. Grounded in behavioral science, the study integrates the COM-B model and Fogg Behavior Model to examine capability, motivation, and triggering factors that influence maintenance behavior. Expert interviews and user research revealed that while technical knowledge is accessible, users often lack intrinsic or extrinsic motivational triggers to perform periodically required maintenance. Short-term stimuli, such as dirt or reduced appliance performance, were more influential than long-term sustainability goals.

Based on these insights, a set of magnetic reminder cards was developed and tested. Designed for washing machines and extendable to other EEAs, these cards combine simple instructions with visual and textual cues, including an option of planning the next maintenance activity, aimed at raising awareness and recurringly motivating the required maintenance activities. ...

How a creative consultancy can add to the inclusion and feeling of belonging for people with invisible disabilities within their organisation

Master thesis (2025) - E.M.P. Bosman, C. Wehrmann, É. Kalmár, Soraya Ramdin
This research investigates the experience of belonging among individuals with invisible disabilities in the workplace, with a focus on fostering inclusivity. More specifically, within the workspace of the company Flatland, a creative strategy and visualisation agency. This research is an extension of their efforts in the realms of Diversity, Equity and Inclusion (D.E.I.).
Research question: How can the organisation of Flatland add to the inclusion and feeling of belonging for people with invisible disabilities within their organisation?

Motivation
The research is also deeply personal, as I, the author, have an ‘invisible’ disability. Throughout the research, I have used insight stemming from both my own and others’ experiences. Prioritising qualitative data and lived experiences.
The recognition of the importance of D.E.I. efforts in companies and in society, in general, is growing. However, in many aspects the research and understanding are still severely lacking. Specifically, in the realms of disability and invisible disability inclusion, there are many knowledge gaps and misconceptions. Here I see the need for more lived experience data to close those gaps.

Approach
In chapter 3 a lens for understanding the invisibly disabled experience is created. This research uses the social perspective on disability:

“[Disability] results from the interaction between persons with impairments and attitudinal and environmental barriers that hinders their full and effective participation in society on an equal basis”

Having an invisible impairment produces extra workloads. An aspect of that is interpersonal, where advocating for oneself is both essential and challenging due to misconceptions and misunderstandings. The research further focuses on the intangible feeling of feelings like belonging. Here a belonging spectrum is introduced to further analyse findings.
The first step in collecting qualitative data is a creative session held with the employees of Flatland. Here the concepts of disability, invisible disability, and belonging are introduced and explored. Through the analysis of the drawings made in the session conclusions are drawn on their expressions of belonging and their understanding and view of disability. One finding was how the drawings on belonging favoured the more concrete right side of the belonging spectrum, often leaving out the left side that focuses more on the perspectives around thoughts and feelings. For the context of Flatland, the definition of belonging was defined as:

“ My place within this group is unquestioned. Within this space I can experiment, move, take up space, and express myself as I wish and am. “

After gathering the perspective from inside Flatland research is conducted on the experiences of the invisibly disabled. Several participants are asked to fill in an assignment booklet which then forms the basis of the interviews, a method called context mapping.

The booklet has assignments on the experience of disability: belonging and receiving help. The reporting of the results focuses on retaining the complexities of this lived experience, which display complicated relationships with receiving help.

Conclusion
The conversations that were held through the booklets brought up many topics that could be linked back to the belonging spectrum and more specifically those emotional, intangible aspects. The use of this research tool made space in conversation to discuss aspects of belonging. This finding brought us to the suggestion of implementing the research booklet as a tool within Flatland. As a first step to open up these conversations and make deliberate space for the emotional aspects of belonging. The added value being that this will be especially beneficial to the invisibly disabled, for whom the onus of advocating for themselves will slightly shift to the company. However, these conversations could have a curb-cut effect and benefit all employees.
The research ends on a discussion of what topics are not covered but deserve further attention and how the research is and isn’t representative. A vitally important part of any research so intertwined and critical of representation. ...
Master thesis (2025) - J. van Mil, C. Wehrmann, É. Kalmár, Julia Cramer, J. van Keulen
Encryption is central to securing communication and information exchange in today’s digital society. The rapid progress of quantum computing poses a major threat to this. Once cryptographically relevant quantum computers become available, widely used cryptographic systems could be broken. Quantum cryptography, with protocols such as Quantum Key Distribution (QKD) and newer foundations of protocols such as Quantum Secure Function Evaluations, is being developed as a possible solution. Yet, an open question remains whether industry is ready and willing to adopt these technologies once they move beyond research. This adoption challenge is further complicated by the dynamics of technological hype. The excitement around quantum technologies has attracted investment and media attention and inspired national strategies. However, it also risks inflating expectations and shaping priorities in ways that may not align with practical realities, as has happened with technologies like blockchain.
Against this backdrop, it becomes essential to examine how experts in cybersecurity and quantum research perceive quantum cryptography, navigating between justified optimism and potentially misleading expectations.

Research aim and approach
This thesis explores the factors influencing the adoption of quantum cryptography in the Dutch cybersecurity industry and presents a communication tool for those who promote quantum cryptography, to help enhance future narratives surrounding adoption.

How can the opportunities and challenges of adopting quantum cryptography in the Dutch cybersecurity industry be understood through insights into stakeholder perceptions and adoption dynamics?
This is further broken down into four subquestions:
1. How is quantum cryptography perceived in the cybersecurity industry in the Netherlands?
2. Which theoretical perspectives can help explain the dynamics of innovation and technology adoptionrelevant to quantum cryptography?
3. What insights from adoption models of other security technologies can inform a tailored adoption model for quantum cryptography?
4. How do experts from cybersecurity and quantum cryptography assess the adoption of quantum cryptography in the cybersecurity industry, and which factors do they identify as most influential?
The findings to these research questions are applied in the design of a communication tool to conclude this research.

To answer these questions and apply them in a design, the research followed a triple diamond model (Discover–Define × 2 – Develop–Deliver). The first two diamonds focused on research and analysis, while the third translated findings into a communication design. The methodology combined:
1. A background study of perceptions of quantum cryptography in the cybersecurity industry;
2. The construction of a theoretical framework, drawing on adoption and innovation models;
3. A systematic literature review of adoption models for comparable disruptive security technologies (AI, blockchain, IoT);
4. Expert interviews with professionals in cybersecurity and quantum cryptography;
5. A design phase producing a communication tool to address narrative challenges.

Findings
Perceptions in the Dutch cybersecurity industry
The Dutch cybersecurity field is aware of the quantum threat but demonstrates little urgency or coordination in its response. Awareness is largely concentrated on QKD, with limited recognition of other quantum cryptographic protocols. Quantum cryptography is often viewed as a far future solution rather than an imminent opportunity.

Theoretical framework
Three dimensions help explain adoption dynamics:
• Why innovation is necessary: framed through the Red Queen hypothesis, cybersecurity is seen as a continuous race between attackers and defenders, with quantum computing as a disruptive shift.
• What drives or constrains adoption: Protection Motivation Theory highlights the role of perceived threats and coping abilities, while security economics reveals systemic disincentives for adoption.
• How adoption unfolds: models such as TAM, UTAUT, TOE, and DOI provide insights into processes of acceptance, diffusion, and integration. Together, these perspectives contextualise adoption of quantum cryptography as both a behavioural and systemic phenomenon.

Insights from adoption models of other technologies
Adoption studies of AI, blockchain, and IoT show that effective models are built by combining different theoretical frameworks and adding technology-specific factors. For quantum cryptography, a hypothetical adoption model is proposed that integrates TAM and TOE, supplemented by DOI innovation characteristics (e.g. relative advantage, complexity, compatibility). Additional factors such as perceived trust and perceived security are highlighted, given their critical importance in the context of data security
technologies.

Expert assessments and influential factors
Interviews revealed that adoption of quantum cryptography will depend most strongly on
• A convincing business case (marketing and relative advantage);
• Environmental drivers (standards, certifications, and government regulations);
• Social influence, including hype and lobbying.
Barriers are predominantly technological (complexity, immaturity, fragility of infrastructure, comparison with capabilities of classical cryptography) and organisational (knowledge gaps in both cybersecurity and quantum communities, cost considerations). Importantly, many factors interact: for example, complexity undermines perceived ease of use and trust, while immaturity diminishes relative advantage. To capture these interdependencies, an infographic synthesis was developed, mapping adoption factors, their relationships, and stakeholder perspectives. This visualisation serves both as an analytical synthesis and a decision-support tool, highlighting factors that have greater or more direct impacts on adoption intention and how their effects are viewed by stakeholders.

Design contribution
Building on the findings, a communication tool was designed to address the issue of fragmented narratives. Stakeholders often rely on a single narrative, such as the hype of absolute security. This oversimplifies the reality of quantum cryptography and risks undermining trust. The design introduces the ”Dice of Narratives of Quantum Cryptography”, a metaphorical cube with six narrative perspectives. Just as one cannot see all faces of a dice at once, stakeholders rarely perceive all narratives simultaneously. Rolling the dice becomes a way to encounter multiple perspectives, emphasising that only by combining narratives one can make a more balanced and trustworthy story. The tool is intended for use in policy workshops on conferences (e.g. Quantum Meets), engaging stakeholders such as policymakers, industry leaders, and advocates. By encouraging participants to combine and compare narratives, the tool promotes more nuanced discussions between stakeholder, so future users can make better informed decisions.

Future research directions
This exploratory study of quantum cryptography adoption in the Dutch cybersecurity industry suggests several avenues for further research. First, the proposed hypothetical adoption model could be validated through larger-scale surveys to assess the relative weight and interactions of factors across stakeholders. Longitudinal studies could track how perceptions evolve alongside technical developments and pilot projects. Comparative research across countries would reveal how adoption dynamics differ under varying levels of investment, regulation, and infrastructure readiness. The influence of hype, lobbying, and narratives needs deeper investigation, starting with systematic mapping of currently circulating narratives in industry, policy, and media. The role of standards and certifications on trust, investment decisions, and experimentation should also be explored. Finally, the adoption dynamics infographic that resulted from this research, provides additional paths for design-oriented studies, investigating how different lines of influence can be visualised, communicated, and tested in practice.
...

Researching the motivational factors that influence teachers from the Industrial Design Engineering bachelor to publish and/or create open educational resources

Master thesis (2024) - A. Scharroo, C. Wehrmann, É. Kalmár, M.J. de Vries, M. de Jong
The Delft University of Technology wants their teachers to create and publish Open Educational Resources (OER). And even though they have an OER policy in place, creating and publishing OER is not yet a common practice. Therefore, this research aims to answer the question “How can a communication tool be used to help increase the creation and/or publishing of (little) OER at the Industrial Design Engineering faculty?”. It does so by taking a design-based approach and using the double diamond method.

This thesis starts by using literature to create a combined framework which combined the reasoned action approach with the OER adoption pyramid. This combined framework showed multiple factors that are relevant in influencing the motivation of teachers to create or publish OER. These motivational factors were incorporated into the questions and topics that were discussed in the semi structured interviews. The outcome of the interviews was compiled into a causal loop diagram that showed how different factors influence the willingness of teachers to create or publish OER. The causal loop diagram also showed how some factors could be both a driver and barrier depending on the situation. Based on the interview results the critical nodes were identified in the causal loop diagram. The critical nodes being: available time, perceived institutional support, perceive time and effort it cost to publish OER, clarity in expectations of OER, social responsibility to create/publish OER, Sharing ER with colleagues.

Using the critical nodes, a design goal was formulated. This design goal resulted in the design of a roadmap that laid out the phases in which the TU Delft can support IDE teachers in publishing their educational resources as open educational resources. The first phase addresses the creation of a designated support team and spreading awareness about OER. The second phase outlines that teachers first publish in a closed system, since sharing their material with colleagues is something teachers already do. During the second phase the educational material will also be improved via peer-to-peer feedback and the support team will ensure the quality. In the final phase the material will be published as open educational resource.

In conclusion, using this roadmap should make it easier to increase the creation and publication of OER at the IDE faculty by lowering barriers for teachers and playing into teachers’ drivers. For further research, it is recommended to validate the design and look into possible differences between teachers for master and bachelor courses. ...

Exploring how to Promote Acceptance in the Design of an Alertness Feedback System based on Eye Measurements

Master thesis (2024) - Maurits Rietveld, Caroline Wehrmann, Éva Kalmár, Nicole van Nes, M. de Vries, Ellemieke van Doorn
Train drivers are challenged to stay alert during train driving, for a big part due to the limited amount of tasks, and monotony of tasks. Driver condition monitoring (DCM) is a technology that involves measuring the driver’s alertness state in real-time, in which use of eye-based measurements is considered. Since DCM’s are upcoming in car and truck industry, train operators are now also showing interest in this technology to improve alertness. New technologies however are often resisted in railway operator companies, shown by strikes and works council involvement, and currently, it is unknown how drivers recognize and deal with alertness in the first place. Also for implementing DCM’s in the future, it is unknown what is required for such DCM feedback designs for acceptance to be promoted. This research thus aims to investigate how acceptance of train drivers can be promoted in a DCM feedback system. Considering a DCM system that can measure eye-directions, blinking behavior and gaze fixations, theoretical insights propose that you can use these measurements to infer driver distraction, sleepiness and mind-wandering. Theoretical approaches towards acceptance of technologies are generally focused on influencing the in-tention to use a technology. Generally used is Technology Acceptance model for evaluating acceptance of various technologies, proposing that the perceived usefulness and perceived ease of use are important to model an intention to use, and actual use of such DCM technology.
An explorative, qualitative approach led to conducting focus groups with train drivers and office employees to investigate the sensitive topic of alertness. In total, four train drivers and four office employees participated. To analyze the results qualitatively, thematic analysis was performed by coding iteratively. For current alertness strategies, the results showed that drivers recognize sleepiness the most, while fatigue and mind-wandering (task-related tiredness) are perceived as similar to sleepiness. Distraction was not recognized, as they are occupied more with a ’distributing’ and ’prioritizing’ their attention. Designing DCM feedback in a way that promotes acceptance is proposed to consider how drivers find a device useful, how their perceptions of autonomy and competence are influenced, and how to foster the trust towards the organization with respect to data use. The conclusions call for considering both rational factors (perceived usefulness) and affective factors (as a feeling of competence and autonomy might be related to intrinsic motivation) in the design of alertness feedback systems for train drivers. ...

Helping climate and energy researchers reflect on their role in action-oriented transdisciplinary collaborations

Master thesis (2022) - J. Buwalda, C. Wehrmann, M.C.A. van der Sanden, É. Kalmár, Håvard Haarstad, Janne Bjørgan
Transdisciplinary research can be a powerful means to achieve a change in society. This participatory form of research is becoming increasingly common in climate and energy research. However, transdisciplinary research can be challenging. Which role should a researcher adopt when collaborating with societal actors? This master thesis focuses on challenges around transdisciplinary researcher-roles at a specific academic research institute: the Center for climate and energy transformation (CET) at the University of Bergen in Norway. Through design-based research, the thesis developed a tool that can help starting researchers at CET (students and PhD-candidates) to reflect on these challenges. First, a descriptive case-study at CET analyzed which challenges researchers at CET face, using semi-structured interviews, logbooks and focus groups. Next, the research designed a reflection tool, using brainstorming techniques, prototype evaluations session and a test session. The resulting reflection tool is a card-game that makes CET-researchers exchange ideas about which roles to adopt in a playful way. Through the game, the CET-researchers learn a new language with which they can talk about researcher roles. They widen their repertoire to think and speak about what they want to contribute to transdisciplinary collaborations and how they can do that. This can help them when making role-divisions in researcher-teams and when discussing expectations with collaboration partners. Helping the academic changemaker reflect on their role in transdisciplinary collaboration – it is a crucial step towards creating more conscious and purposeful collaborations with the ability to transform society in the face of climate change. ...

Using the knowledge on their attitude and motivation to create an educational module that supports anesthesia assistants in their awareness and understanding of the impact of AI-assisted monitoring

Research on the possibilities to use Artificial Intelligence (AI) at the Operating Room (OR) is rising, although there is no implementation yet. AI-assisted monitoring could provide support to anesthesia assistants in their task of patient monitoring, by making predictions on the future occurrence of deviating events in the vital parameter values of the patient. As AI-assisted monitoring would come close the profession of anesthesia assistants, this explorative, qualitative research investigates the attitude of anesthesia assistants towards the use of AI in their task of patient monitoring. Furthermore, it investigates the motivational factors that are important for their motivation in their monitoring task as well as the expected impact of AI on their motivation. This design-based research subsequently describes how these results are incorporated into the development of an educational module about AI and motivation for anesthesia assistants. Gaining as well as giving insight in the motivation of anesthesia assistants is important, as their motivation is of impact on their professional behaviour while their decisions and actions are directly related to the safety of the patient.

Through literature research and semi-structured interviews, it was found that among anesthesia assistants there is little knowledge on the possibilities of AI at the OR, but that their attitude towards AI-assisted monitoring is positive as long as only suggestions are given. Only two out of eight anesthesia assistants are cautiously positive towards the possibility of AI to automate the monitoring process. Furthermore, it was found that the motivational factors of autonomy, relatedness, competence, self-efficacy, and self-actualisation are all important to very important in the motivation of anesthesia assistants. Overall, none of these factors stands out in being most or least important. The expected impact of AI on these motivational factors among anesthesia assistants varies from negative to positive and is highly dependent on the form of AI-assisted monitoring. As various forms of interrelatedness between all these motivational factors are identified by the anesthesia assistants, specific to their working practice and environment, the impact on one motivational factor might indirectly also impact others.

These results on attitude and motivation are incorporated in the design of an educational module for anesthesia assistants. The module consists of two parts. One part regarding AI-assisted monitoring and one part regarding the motivational factors that are important for their motivation and the impact of AI on motivation. Design requirements by the anesthesia assistants, as well as an expert validation by an anesthesia educator, are used to finalise the design of the module. This module can help anesthesia assistants to develop awareness and understanding of how AI-assisted monitoring, in the form of giving suggestions, can support them in their patient monitoring task. Furthermore, it helps them to develop awareness and understanding on their own motivation and the impact that the use of AI-assisted monitoring may have on their motivation, guiding them towards becoming deliberate professionals. ...

A Dual Perspective on the Future of a Synthetic Cell

In this work, we studied future expansions of a synthetic cell with a dual perspective. For the Nanobiology part, we studied how the membrane surface area of a synthetic cell can grow, which is required for a synthetic cell to divide. Here, we combined growth strategies based on DNA and tension-mediated vesicle fusion. We found that 1 μM DNA and an osmotic shock optimise fusion efficiency, and we showcased the broad applicability of our fusion protocol. Furthermore, we observed indications of membrane growth, with a potential increase in membrane surface area sufficient for sustained synthetic cell division. For the Science Communication part, we studied the vision of the Synthetic Cell Initiative to build a European innovation ecosystem. The purpose of this innovation ecosystem is to develop synthetic cell applications through co-production. We propose that this innovation ecosystem should be formed through local synthetic cell hubs. By the promotion of bottom-up initiatives and the execution of top-down activities, responsible research and innovation can be internalised in the envisioned innovation ecosystem. ...

A design-based research on the controversy in the case of peat meadow areas in the Netherlands

A fair part of the surface of the Netherlands consists of peat grounds. A large part of these grounds is used for livestock farming. However, the peat needs to be dried to prevent cows and other cattle from sinking with their hooves into the soft, wet peat. This drying starts a process called oxidation. This reaction with oxygen in the air and warm sunlight results in the forming of CO2 and some methane gas, which are added to the atmosphere. Since this contributes considerably to the CO2 emissions in the Netherlands, it requires solutions to stop the oxidation process and the subsequent subsidence. It seems impossible to find a solution for this problem with which every stakeholder can agree. Five main stakeholder groups are identified in this research: the research organisations, the agricultural stakeholders, the water management organisations, the nature preservation organisations, and the administrative bodies. These parties all have their own worldview and their own ideas about the situation. This forms a controversy, which contains many different elements and different actors, in which the different stakeholder groups disagree on different elements. This controversy slows down the process of stopping the oxidation of the peat meadow grounds. Therefore, the end goal of this research is on the one hand for the different stakeholder groups to gain insight in the motives of the viewpoints of the counteracting parties. On the other hand, a new base for these stakeholder groups should be formed in which a productive situation for (renewed) collaboration is created, which can lead to more effective conversations on the future solutions in peat meadow areas. This study is approached using the methodology concept of Design-based Research.
To create a situation in which stakeholders can work together towards a solution instead of just focusing on their own priorities, the stakeholders should take a step back and build trust on other levels with the different stakeholder groups. This should help them to open up to insights that other stakeholders may have, which could lead to a situation in which they could work together. With this as a foundation, a participatory tool was chosen that could help to build a situation for a more effective collaboration: a serious game. The digital board game ‘Samen door het veen' (translation: Together through the peat) was designed, played with representative players, and analysed with the concepts of collaboration and double loop learning. The results showed that the players built more trust during the game and gained more insight into the perspective of other players, so the game seems to achieve its goals quite well. It can be concluded that the game is fun to play and that it has quite some potential for stimulating double loop learning and creating a situation in which more effective collaboration could take place. ...
In this research, we use different supervised and unsupervised machine learning techniques to detect anomalies in NetFlow data. We aim to create a system for home or small-business use where the user is in control. We use WEKA for the machine learning models and feature selection. The UGR’16 dataset is used to train and test the models. We create three different models for each method where the model is trained on one day and tested on another. We find that supervised models perform better than unsupervised ones. Random Forest has the highest F1-score (0.9165) of the supervised models. However, Random Forest is statistically similar to 6 out of 8 different classifiers according to the Friedman and Nemenyi tests. One challenge with supervised methods is that there is a need for a third party to make sure the models are updated for new attacks. However, it seems feasible to create a system for network monitoring for home usage. Finally, we argue that the approach to research in machine learning should, in some cases, take a different direction. Instead of chasing the highest accuracy, we should look at which factors allow a user to work with a system. A set of rules is much easier to interpret than complex models. Especially if these models are statistically similar we could look at factors other than a single metric. After these results, we look at presenting warning messages to end-users. We want to motivate users to take action after they read a message. For this, we first create a theoretical framework based on behaviour, motivation and uncertainties. We want to find out if we can use uncertainties to group users, which allows us to create a semi-personal approach. Based on this theoretical framework, we create different versions of a warning message that focus on different uncertainties. Through 22 interviews, we asked the participants to rank the different versions and asked them questions about their stance on network security and preferences for warning messages. We found that uncertainties can not be used to group users but that they do influence them. Including a solution and which steps to take offers users peace of mind, even if they are not able to complete the steps. The results indicate that a more personal approach is necessary where every person has the choice to customize the message to fit their preference. ...

Closing the gap between programme and professional career

We live in a fast-changing world, where higher engineering education focusses on creating engineers that will deal with upcoming technological innovations. It is important to think ahead and educate engineers that could work on these problems and develop technological solutions for them, and are adaptable to deal with the changes in the world. This thesis focusses on how the master programme Applied Mathematics at the TU Delft could prepare their graduates for their professional career, by including adaptability in the curriculum. Adaptability is the ability to settle more easily in a new and unfamiliar environment, and to withstand changes in a changed environment or a new environment. Starting a new job after graduation is new, unfamiliar and unpredictable, so being adaptable could smoothen the transition from programme to labour market. The results of this thesis showed that two adaptive competencies, Dealing with Uncertain and Unpredictable Work situations, and Demonstrating Interpersonal Adaptability, were found to be most interested and relevant to include in the master programme. A tool was developed for the internship to make students more aware about these competencies, make them practice these competencies at their internship by developing personal learning goals and have them reflect on their experiences at the end. This tool could make the AM students more adaptive, what might prepare them for their professional career. ...
This study has researched what are defining factors on the attitude toward a new technology within the group of Area Control (ACC) at Luchtverkeersleiding Nederland (LVNL) and how these factors shape an Air Traffic Controller’s (ATCo) attitude toward the technology in an exploratory way. The outcomes of the research suggest that dominant factors are result demonstrability, output quality, job relevance, subjective norm and (timeliness of) involvement in the development process. First, the work domain of air traffic control and the functioning of holding patterns were researched and a description of these things was given, based on interviews with air traffic controllers and on literature. It was found that the largest challenge when holding at LVNL is adherence to Expected Approach Time (EAT), and that this is caused by two things: the first is a lack of accurate and integrated information on the impact of a control decision on EAT adherence, the second is that current practice of ATCos is to aim for a 2:00 minute deviation from the EAT, which is the current error margin they are allowed to operate on. It was found, based on interviews with two professional area controllers and one other expert from LVNL, that in current practice an ATCo makes estimations of when to give a turn-to-IAF command based on a rule of thumb with a holding loop timing of four minutes and by extrapolating the history dots of the aircraft. However, analysis of historical holding pattern data shows that lap times often take six or seven minutes and that wind severely influences the in- and outbound ground speeds, making both the four-minute loop time and history dot extrapolation unreliable estimators. A support tool was designed that gives a prediction of the time it takes to reach the IAF from different locations, taking into account aircraft characteristics and wind. The new tool was designed such that it is in accordance with the layout and style of present LVNL systems. It involves two things. First, a prediction of the EAT adherence error upon giving an immediate turn-to-IAF command in the form of a delta-T in the aircraft label. Second, and a prediction of the turn-to-IAF locations at which an EAT adherence error of +120s, +110s, ..., 0s, 10s, ...-120s will be achieved, in the form of colored dots (ECOL dots) on the vertical view and the top view radar screen. The social situation at LVNL was described based on interviews with two professional area controllers and one other expert from LVNL. Indications were found for two opposite things. On the one hand, that (some) ATCos are willing to innovate and actually take initiative in innovation processes, and on the other hand, that (some) ATCos have a strong resistance toward technological system innovation. Regarding collaboration between groups, itwas found that the relation between ACC and Approach Control (APP) that is characterized by skepticism on the skills of the other party. Finally, it was found that ATCos take pride in the way they execute their job and are willing to work hard to achieve the goals they believe match their job description. In doing this, ATCos have indicated to value their autonomy and the idea that the effort they put in actually adds value for the full Air Traffic Control (ATC) process. Besides interviews to describe the situation at LVNL, case studies were done to research innovation in other organizations that showed similarities to the context of LVNL. Three things were found. First, ensuring people can contribute and influence the innovation from early stages of the innovation process is a promising factor that seems to influence a person’s attitude toward using the innovation in a positive way. Second, the lack of implementation of innovations has caused skepticism under ATCos. Third, the TAM is a suitable framework to further explore how area controllers at LVNL’s attitude toward innovations manifests itself. To be able to use the TAM in the framework, first, literature on the TAM has been reviewed. It has been found that there are different versions of the TAM that include or exclude several variables. For the present research, the most suitable version of the TAM was determined to be the TAM2, using the following external variables: result demonstrability, output quality, job relevance, image, subjective norm, experience, voluntariness, age. Next to the TAM in the framework, literature was reviewed on several factors surrounding the interaction with support systems, where autonomy and trust were found to be of a valuable contribution to the framework in the present research. The operationalization of the framework was done using survey questions, a semi-structured interview, and results from letting ATCos interact with the system innovation concept (the tool). It was found that some factors of the TAM could be questioned straightforward in either the survey or the interview, while for other factors it was necessary do design multiple questions and depend on the type of answers given by the participants. Since the research is exploratory, it was decided to keep the interview setup semi-structured to ensure participants would be able to outline defining factors for their attitude toward innovation relatively freely, instead of needing to keep them within a predefined set of factors. From the performed case study, where 10 ATCos participated in an experiment in which they had to manage two holding scenarios, with and without the tool, the following things were learned. First, three of the external variables defined in the framework played the largest role for participants’ perceived usefulness of the tool were result demonstrability, output quality and job relevance. Second, it was found that subjective norm impacts the attitude towards use for the participant group. A mismatch was found between the participants’ attitude toward innovation in general and the way the participants thought their colleagues viewed system innovations. Subjective norm was also found to be of influence on the participants personal objective in the level of EAT adherence they aim to obtain in their day-to-day work. Third, participants linked the external variables not only toward perceived ease of use and perceived usefulness, as is the case in the TAM, but also to attitude towards use. Finally, it was found that participants appreciated being part of an innovation process rather than being presented with the final solution, which was further improved by the fact that the concept was visibly not perfected yet (even though it was functioning, it was clear it was still under development and showed some minor issues in e.g., the stability of the computer program). ...

Negotiating nuclear energy in the Dutch energy transition

The Thorium Molten Salt Reactor is one of the technologies being investigated to offer large scale carbon-free energy production. Yet as it is a form of nuclear energy it is controversial, and TMSR research is underfunded. In an effort to combat the controversy, a communication strategy for TMSR research is developed. This communication strategy is focussed on Dutch governmental organisations and political parties. The central question in this thesis is: How could TMSR be communicated by nuclear scientists, in order to improve the quality of discussion about TMSR at the relevant governmental organisations in the Netherlands? This was researched creating an overview of all relevant governmental organisations and interviewing several of them. Several factors that influence the attitude were hereby questioned, such as their values as an organisation, the frame by which they view nuclear energy in general, their approach to climate change, and their focus in energy policy. The relevant governmental organisations were identified as: ministry of economic affairs and climate, the social economic council, PBL Netherlands Environmental Assessment Agency, and the political parties PvdA, VVD, D66, GL, and CDA. The consensus focussed Dutch political system, coupled with preference for a democratic approach to climate change, leads to a communication strategy based on negotiation. This negotiation must be done in a constructive way that acknowledges the needs of all attending parties. Thorium is explicitly not to be presented as a substitution to wind, solar, and the climate agreement, but as an addition to it. The creation of a Platform Energy Innovation as a discussion form is recommended. This platform is to facilitate discussion with all the above-mentioned organisations and several other supporting ones. The use of integrative negotiation has the potential to create the desired positive attitude without creating enemies and thereby secure a more stable future for TMSR research in the context of the Dutch energy transition. ...

Structural geology and fracture network characterisation of the Daly Waters Arch, Northern Territory (Australia) & communication approach for technical uncertainties in geothermal energy implementation in the Dutch energy transition

This report contains the results of the two thesis studies that finalise a combined MSc--programs of Reservoir Geology and Science Communication. The first part of the report comprises the multi-scale data (kilometers to meters scale) analysis of a) the large--scale architecture of the subsurface Daly Waters Arch which was obtained from seismic data interpretation; and b) fracture pattern characterisation by outcrop measurements and drone imagery in the Tomkinson Province. Both the Daly Waters Arch and the Tomkinson Province are located in the largely undeformed Palaeo-- to Meso--Proterozoic Greater McArthur Basin in the Northern Territory, Australia. In July 2019, a geological fieldwork was conducted in the Tomkinson Province to collect the fracture data with the drone. In this research, the Daly Waters Arch and the Tomkinson Province have been geologically linked based on seismic and fracture data. By discussing analog cases of far-field deformation, these results have been placed in a larger context of large--scale basin deformation.

The second part of the report focuses on the Netherlands, where ambitious goals have been set for the implementation of geothermal energy in the energy transition. During the gas production in Groningen, a negative social perspective towards mining operations, in general, was developed. For the implementation of geothermal energy, an approach for the communication of technical uncertainties between the initiators and the local public of a geothermal project is designed in this study. Technical uncertainties that are present in geothermal energy implementation in the Netherlands have been identified during semi-structured expert-interviews with different stakeholders in the spectrum of geothermal energy. The approach addresses guidelines for the communication of the context, the goal, the technical uncertainties present in the geothermal project, the main communicating actors, their reference frames, and the situation in which the communication process takes place. ...
The Netherlands has a strong tradition of blueprint planning in spatial design. Since the financial crisis of 2008, a shift has been made to more organic approaches to development. Currently, a paradigm is evolving which is able to deal with complex challenges that the built environment faces today: a shortage of housing and a transition to sustainable energy. Industrial area Schieoevers Noord, situated in Delft, is developed with the rationale of this new paradigm: directing into the direction of a mixed-use and densified city district, yet with an open end. Since the Municipality of Delft does not own land in the 75 hectares large district, interdependencies exist between the municipality, project developers, and the current users: industrial companies. The problem statement of this research project: how to plan for sustainable energy supply (heat and cold supply) in a complex context characterised by interdependencies. The concept of adaptivity has been explored as a potential strategy to implement in a process of sustainable energy planning, resulting in the design of a five-step approach: the Schieoevers Noord approach for adaptive energy planning. Six characteristics of adaptive processes have been found based on a literature review. Three of these turned out to be absent in current approaches for sustainable energy planning: a way to explicitly incorporate uncertainties (unpredictability and interdependency) in planning, mechanisms for iteration, and the creation of conditions for development (rather than planning actual developments). The latter has been intensively studied by investigating heat and cold balances in different building scenarios (densities and function mixes), concluding in the need to shape conditions for development in Schieoevers Noord, by the proposal of energy-based design guidelines, ensuring energy-neutral developments, no matter the building volume or mix of building functions. ...