The study presents Electric Vehicle (EV) Point-of-View (POV) Vehicle to Grid (V2G) optimisation, where the system knows the trips and energy demand of the EV. This allows it to be less conservative in the departure State of Charge (SoC) of the EV battery. The peak and cost reduction of Vehicle POV optimisation are compared with state-of-the-art Location Point-of-View optimisation, this is, the car can do V2G but it has to depart each location with at least 80% SoC as the next trip energy demand is unknown. A Mix Integer Linear Programming (MILP) V2G optimisation approach is presented to reduce peak demand and total system cost of a fleet of EVs travelling between several residential locations and one common workplace. Simulations were conducted with 26 EVs unevenly distributed between five residential locations and commuters to a common workplace. The results indicate little differences in the reduction of peak demand between both POVs of V2G optimisation. However, the system cost can be further reduced with Vehicle Point-of-View optimization, saving an additional 200 euros annually per household by transporting cheaper energy from workplaces to residential locations.

Modular Multilevel Converters (MMCs) offer significant advantages in the medium to high-voltage settings. The modular architecture of MMCs allows for redundant submodules (SMs) to improve overall reliability. These redundant SMs can be deployed using various redundancy strategies, such as Load-Sharing Active Redundancy Strategy (LS-ARS), Fixed-Level Active Redundancy Strategy (FL-ARS), and Standby Redundancy Strategy (SRS). The primary contribution of this paper is the introduction of guidelines for applying Monte Carlo Simulation (MCS) and a comprehensive methodology for its application across various redundancy strategies. This enables precise planning of preventive maintenance and estimation of the number of faulty SMs with a specific lifespan in the MMC. More importantly, MCS is applied to estimate the reliability of the MMC applying Mission Profile for SRS and LS-ARS where analytical solutions are unavailable. An analysis of uncertainty and the applicability of MCS is also presented to demonstrate the advantages of MCS over analytical methods. The computational time required for applying MCS across different redundancy strategies and arm levels is also assessed.

The growth of suburbs is a challenge for public transport, and new tools are needed to electrify suburban and intercity bus lines sustainably. In-motion-charging (IMC) buses combine the advantages of both trolleybuses and electric buses. This paper analyses a case of using IMC buses on a 17-km-long intercity route service between Arnhem and Wageningen in the Netherlands. The analysis covers different traction battery technologies, sizes, and charging strategies to find the economically optimal solution. The study was carried out using a numerical model of an IMC bus, which was validated and tuned based on year-round experimental recordings obtained from Arnhem trolleybuses. The model outputs were next used to analyse the batteries ageing under specific charging-discharging current profiles. The analysis shows that the most long-term cost-effective solution for the considered case consists of using merged IMC and opportunity charging as well as a 90 kWh LTO battery, whose expected lifetime would be more than 14 years.

Distributed generation, such as photovoltaics (PVs), and electrification of heating and transportation with heat pumps (HPs) and electric vehicles (EVs) will play a major role in the energy transition. However, these low-carbon technologies (LCTs) do not come without side effects such as voltage violations, power loss increase, component overloading, higher energy consumption, power peaks, and power quality issues, e.g., harmonics and phase unbalance. This work constitutes a review analysis and summary of all the important findings concerning the various grid impact issues that can appear due to the grid integration of these 3 LCTs. The work also encapsulates various research characteristics such as grid topology, seasons, simultaneous operation under various LCT combinations, penetration levels, etc. Moreover, it incorporates a qualitative analysis of the impact level of the most investigated grid issues and quantitative comparisons between the different grid types and LCTs. It has been shown that the combined integration of PVs-EVs and PVs-HPs can result in mitigation effects without extra solutions. Moreover, voltage deviations and unbalance affect more the rural grids while component overloading is more hazardous for suburban grids. Finally, proposed mitigation solutions, such as energy storage, smart charging, etc., are correlated with their respective grid impact issues.

Consensus algorithm-based secondary control, such as virtual impedance, is typically used to achieve power-sharing and ensure stable operation in microgrids. The introduction of communication, however, increases the system's vulnerability. Communication failure, e.g., under cyber attack or disruption, can lead to a huge loss. To solve this, this article proposes a signal reconstruction approach for the miscommunicated signals. The power-sharing convergence, both in normal conditions and under communication failure, is analyzed via the Lyapunov method. The feasibility and effectiveness of the proposed approach are validated on a lab-scale microgrid.

Accurate battery capacity estimation is essential for the effective and reliable operation of lithium-ion battery management systems. Battery impedance is a key parameter that encapsulates electrochemical information, closely correlating with the internal states of batteries. This study proposes a novel capacity estimation framework that effectively balances accuracy, efficiency, and practicality. Firstly, a novel feature extraction method is introduced to extract health features from the imaginary impedance at a single frequency. The extracted feature demonstrates a strong and stable correlation with battery degradation under various operation conditions, while significantly reducing data requirements. To address the impact of diverse degradation patterns on estimation accuracy, an initial adjustment method is applied to precisely retrace the relative degradation paths of batteries. The results show that the mean absolute percentage error of battery capacity estimation decreases from 15.65% to 2.87%. Additionally, a transformer-based capacity estimation model is developed, which integrates a feature fusion unit to explicitly eliminate the influence of temperature on model performance. As a result, the model's accuracy improves by over 28% under various thermal conditions.

Low-carbon technologies (LCTs) such as Electric vehicles (EVs), heat pumps (HPs), and PV systems increase phase unbalance due to uneven phase distribution. Phase unbalance can lead to overheating, suboptimal capacity utilization, and power losses. This work analyzes the unbalance impact inflicted by the grid integration of PVs, HPs, and EVs under different combinations and penetration levels. The main novelty of this study is the use of different types of real-world distribution grids (rural, suburban, and urban) for the LCT unbalance impact comparison, while simultaneously considering the influence of several unbalance factors; LCT phase connections and grid distributions, the seasonal effect, and the power and consumption levels, the latter of which have been evaluated as mitigation strategies. The results showed that the combined integration of PVs, EVs, and HPs can cause high voltage unbalance, especially in grids with high existing loading. The seasonal effect was the most impactful unbalance factor, intensifying unbalance by the integration of PVs-HPs and PVs-EVs combinations during Winter and Summer, respectively. Furthermore, reductions in the power and consumption levels of the LCTs decreased the unbalance total violation duration in a range between 11% and 25% for all distribution grids. Reducing the LCT consumption levels also decreased the unbalance magnitude, which reached up to 15% for the urban grid under 100% HP and PV penetration. Finally, it was found that consumption duration enhances unbalance, such as the peak power levels, because it increases the simultaneity of technologies operating in different phases.

Quasi-resonant boundary-conduction mode (QR-BCM) and triangular current mode (TCM) have found widespread use in the literature and industry due to their good performance at relatively low complexity. However, additional control challenges occur when these modulations are applied to the four-switch buck-boost (FSBB) converter, due to a discontinuity in switching frequency in multimode operation. This article presents the first closed-loop operation of a variable-frequency, multimode, quasi-resonant BCM control scheme including smooth mode transitions. The proposed control utilizes feed-forward mode transition techniques, based on software interrupt handlers integrated into the digital control scheme. In contrast to most soft-switching schemes in the literature, the proposed digital control does not imperatively rely on high-frequency current measurements but uses dc measurements and high-frequency voltage measurements instead. A 10 kW prototype is developed with which the proposed modulation is compared with three other soft-switching modulation schemes. Our results indicate that the losses of FSBB converter can be reduced by up to 60% using the proposed modulation. Especially at partial powers and high voltages, significant efficiency gains can be achieved.

To tackle the potential grid overloading issue induced by excessive Electric Vehicles (EV) charging demand, a Low Voltage (LV) grid congestion management algorithm with three centralised EV charging management schemes is proposed in this study. The developed algorithm integrates grid information and aims at tackling the foreseen congestion issues by operating on the EV charging processes. This is done through linear programming (LP) or iterative calculations. While the first charging scheme aims at managing the congestion by only affecting the elements with the greatest influence on the congestion, the other two aim at ensuring impartiality towards all users and the overall energy transfer to the EVs, respectively. The simulated results are compared in terms of performance criteria such as grid impact, user satisfaction and fulfilment of charging energy demand. Overall, this study shows that the first scheme brings the best results from a grid perspective. On the other hand, the last scheme leads to competitive results from a grid point of view and the best overall results from a user perspective.

A fast and efficient charging infrastructure has become indispensable in the evolving energy landscape and thriving electric vehicle (EV) market. Irrespective of the charging stations’ internal alternating current (AC) or direct current (DC) bus configurations, the main concern is the exponential growth in charging demands, resulting in network congestion issues. In the context of exponential EV growth and the provision of charging facilities from low-voltage distribution networks, the distribution network may require frequent upgrades to meet the rising charging demands. To avoid network congestion problems and minimize operational expenses (OE) by integrating energy storage systems (ESS) into ultra-fast charging stations (UFCS). This paper presents a techno-economic analysis of a UFCS equipped with a battery ESS (BESS). To reduce reliance on the electric grid and minimize OE, a dual-objective optimization problem is formulated and solved via grid search and dual-simplex algorithms. Analytical energy and physical BESS models are employed to evaluate the optimization matrices. The intricacies of BESS aging are examined to ensure an optimal BESS size with a more extensive lifespan than the corresponding payback period. The integrated BESS significantly reduced reliance on the grid to tackle network congestion while fulfilling charging demands. The dynamic pricing (DP) structure has proven more favorable, as the average per unit cost remains lower than the static tariff (ST). Results illustrate that integrating BESS reduces the OE and peak-to-average ratio (PAR) by 5-to-49% and 16-to-73%, respectively. Moreover, the combination of 70% BESS and 30% grid capacities outperforms the other configurations with a 73% reduction in PAR and a 49% reduction in OE before BESS reaches the end-of-life.

The energy transition encourages using heat pumps at the residential level, which results in a multi-carrier energy system when combined with PV and battery storage. Optimally controlling such systems has proven challenging. The numerous constraints required, different response times per energy carrier, and the need for forecasting methods also increase the complexity and computational cost. We propose an adaptable energy management system strategy for any system architecture with a reduced number of constraints using genetic algorithms with a discrete-continuous approach for the power setpoints. Using random forest regression, we also created short-term estimation models for the PV generation and electric and thermal demand, with error distributions centred near 0 %. Our results demonstrate that the strategy can solve the power allocation problem in the order of 1 s, including forecasting 60 minutes, minimizing electric costs, and ensuring thermal comfort.

Targeting a climate-neutral maritime sector drives the adoption of the all-electric ship (AES). While AESs can utilize both ac and dc shipboard power systems (SPS), a dc system offers advantages in efficiency, power density, and source synchronization. However, the enhanced network complexity of dc grids combined with the high penetration of power electronic devices and harsh environmental conditions can compromise the system's reliability. Therefore, this article provides an overview of the reliability aspect of dc-SPSs, addressing the power system design, adequacy assessment, and reliability improvement. First, the performance tradeoffs associated with the SPS design are examined, revealing how changes in the power system topology and dc bus structure impact the vessel's reliability along with other performance parameters. Second, a hierarchical reliability model framework is proposed for the adequacy assessment of dc-SPSs, considering the reliability from the component level up to the system level. To determine the system-level reliability, multiple probabilistic methods, including simulation and analytical models, are compared using a propulsion subsystem example. Finally, an overview of the reliability improvement strategies is provided, addressing methods at the system, device, and component level. These three topics combined aim to provide guidance in the design of future reliable dc-SPSs.

High-power flexible dc links employ modular multilevel converters (MMC) for compact active power redirection in medium and high voltage grids. During contingencies, such converters may need to provide an enhanced active power capacity to avoid overload in vulnerable grid locations. This paper achieves this target by using the capacitor voltage ripple margin of the MMC submodules (SM) to enhance the dc voltage beyond the rated value. This voltage enhancement enables the enhanced active power capacity of the MMC while maintaining rated electro-thermal stresses on the components. Moreover, dynamically varying the dc side voltage reduces the MMC's circulating current, improving its operating efficiency. Because the average capacitor voltage is controlled to remain constant, the overall stresses and harmonic performance of the enhanced MMC remain the same as in the base case. In this paper, the analytical expressions for the voltage and power enhancement limits are derived, revealing a dependence on the grid-injected reactive power. Furthermore, a controller is designed to achieve stable operation during transient conditions when the power enhancement is carried out. Finally, the enhancement concept is validated using simulations and experiments with a down-scaled laboratory MMC prototype.

This article implements a real-time digital twin (RTDT) of a 10 kW Dual Active Bridge (DAB)-electrolyzer system. The electrical model of a 10 kW alkaline electrolyzer is presented to understand its I–V characteristics. A sensitivity analysis is performed to assess the impact of various parameters on the electrolyzer’s electrical characteristics. The series inductance, crucial for power transfer within a DAB converter, is examined using PLECS software to study the impact of the electrolyzer load on the peak and RMS currents. Based on this, the value of series inductance is optimized, resulting in a minimum overall RMS current throughout the operating power range. RTDT of the DAB electrolyzer system is developed using an OP4610XG real-time simulator to validate the presented model and simulation parameters. A comparison with the PLECS simulation results shows that the developed RTDT accurately operates within the 10 kW alkaline electrolyzer’s electrical characteristics. Thus, this setup exhibits the potential to evaluate power electronics converter designs without a physical electrolyzer system.

This article presents an extended hybrid modulation (EHM) technique to achieve multistage constant-current (MSCC) charging of electric vehicles using wireless power transfer (WPT) technology. Although most research focuses on constant-current constant-voltage charging, MSCC charging offers key advantages, such as lower temperature rise, decreased charging time, and prolonged battery lifespan. However, the existing phase-shift-modulation (PSM) method encounters substantial circulating reactive power and significant efficiency drops in MSCC charging. To overcome this, an EHM strategy is proposed to expand the modulation range of PSM. By applying EHM to both the inverter and active rectifier, the proposed method provides up to 16 operating modes to facilitate multiple CC outputs. Furthermore, an optimal mode trajectory, specifically designed for the MSCC charging, is developed. By implementing this trajectory across different charging stages, zero-voltage-switching is achieved for all power switches, and the overall power loss of the system is minimized. Finally, a WPT prototype was developed to validate the proposed approach. Experimental results demonstrate that the proposed approach effectively enables the MSCC charging while notably enhancing transmission efficiency, achieving dc-to-dc efficiencies between 92.45% and 95.67% across a power range of 231 to 3.015 kW.

This study investigates the techno-economic impacts of various pricing policies on a photovoltaic (PV) system combined with battery energy storage (BES) as a single integrated system within a Dutch residential building. With the increasing adoption of PV systems, managing reverse power flow and grid stability becomes crucial. The study evaluates different scenarios, including net metering, feed-in tariffs (FiT) with time-of-use (TOU), RTP pricing, and subsidised BES. Using a multi-objective genetic algorithm, the optimal size and charging/discharging patterns of the PV-BES system were determined. The optimisation simultaneously minimises the Net Present Cost (NPC) and maximises the Self-Consumption Rate (SCR), to determine the PV-BES size that achieves an optimal balance between economic and technical performance. Results indicate that RTP pricing significantly enhances SCR. While the levelised cost of electricity (LCOE) and payback periods (PBP) are initially higher in the RTP pricing scenario, subsidising BES can mitigate these disadvantages. Additionally, incorporating price limit control variables into the energy management system (EMS) optimises the charging/discharging cycles, extending BES lifetimes and potentially increasing future revenues. These findings provide insights for policymakers to balance economic benefits and grid technical requirements through effective PV-BES integration.

This article presents a dual-side capacitor tuning and cooperative control strategy for wireless electric vehicle (EV) charging. To improve the efficiency of wireless EV charging across broad output voltages and wide-range load variations, this article introduces a reconfigurable WPT system by incorporating two switch-controlled-capacitors (SCCs) into the double-sided LCC (DLCC) compensation network. Based on the analytical model of the system, optimal capacitor tuning factors are derived to reduce the rms values of the inductor currents and to minimize the turn-off currents across the semiconductors. Furthermore, a dual-side cooperative control strategy is proposed. Through the collaborative control of the inverter, rectifier, and SCCs, the proposed method achieves dual-side optimal zero-voltage-switching (ZVS), wide power regulation, and maximum efficiency tracking simultaneously. Compared with the existing triple-phase-shift (TPS) method, the proposed approach improves the system efficiency across a wide range of dc output voltages and power levels. Experimental results demonstrate that the proposed method achieves a maximum efficiency improvement of up to 1.8% in the boost mode and 1.9% in the buck mode.

This article discusses the various operating modes of a series resonant balancing converter for bipolar dc grids. It is shown that the converter can be operated in both the capacitive and inductive regions with respect to the resonant frequency of the LC tank. Furthermore, concerning the pulse width modulation signals to the switches, the converter can either be operated by controlling the phase shift between the converter half bridge legs or the duty cycle of the half bridges. A qualitative comparison of the different modes proves that a) the phase shift modes have better soft switching capabilities, b) the capacitive phase shift mode can show zero voltage switching at switch turn-on in the whole operating range, c) the losses in case of capacitive phase shift mode shows best performance at low load power, d) the inductive region power modes show lower rms current for the same power flow compared with capacitive region modes which lead to lower losses at higher output power. The simulation and experimental results depict the operation of all the modes. Finally, a prototype is designed to validate all operating modes, demonstrating $>$99% system efficiency at 1.75 kW.

The transportation industry is a significant source of greenhouse gas emissions, with freight transport emerging as one of the main contributors owing to its extensive mileage and substantial weight. As a result, electrification of road transportation has become a vital step in reducing direct CO₂ emissions. While the adoption of passenger electric vehicles has gained notable traction, the landscape for Heavy-Duty Electric Vehicles (HDEVs) is still in its early stages of development. Accelerating the advancement and adoption of HDEVs hinges on prioritizing the installation of their charging infrastructure. This requires a deep understanding of HDEVs' energy and power requirements while also considering grid limitations. Meeting the high demand for charging necessitates exploring on-site renewable energy generation and stationary batteries as viable solutions. Recognizing this imperative, a multiobjective sizing model has been developed, tailored specifically to address the requirements of HDEV charging stations. These objectives include minimizing investment costs, penalizing undercharged or rejected HDEVs' charging demand, reducing idle charger time, and managing expenditures within a charging station. The key outcomes of the model encompass various critical factors essential for designing and implementing charging infrastructure for HDEVs. These factors include determining the optimal number of PV panels and wind turbines to harness renewable energy, specifying the capacity of the battery energy storage system, and identifying the necessary number and rated power of chargers in alignment with the grid contract limit.

Electric aircraft technology has gained considerable attention and is rapidly developing to mitigate the environmental impact of air transportation and move toward more sustainable modes. Nevertheless, the unique characteristics of electric aircraft pose significant challenges for the charging infrastructure, which must be effectively addressed to facilitate the growth of electric aircraft. This article provides a comprehensive review of the latest developments and future trends in electric aviation, which covers electric aircraft, battery technology, and electric aircraft charging systems. This article also surveys the possible charging system architectures that can be employed for electric aircraft charging. Various power electronic converter topologies that are suitable for future electric aircraft dc fast chargers are presented. This article concludes by identifying future challenges in the path toward charging electric aircraft and discusses potential solutions to these challenges.