In this study, a modeling methodology is presented for evaluating the performance of a hybrid system integrating different types of solar collectors, namely photovoltaic (PV), glazed flat plate solar thermal (ST) and unglazed photovoltaic-thermal (PVT) collectors to harvest solar energy. Further, the system is integrated with a seasonal storage that is an aquifer thermal energy storage (ATES) system, a heat exchanger and a heat pump (HP) to provide heating, including space heating (SH), domestic hot water (DHW), as well as cooling. The investigation considers various operational modes depending on the climate conditions and building characteristics. The study focuses on comparison of solar collectors in realistic scenarios, examining heating type and insulation levels. Real energy consumption data considering five residential buildings in Amsterdam is employed for the analysis. Annual simulations for the considered buildings are conducted for SH and DHW coverage, along with cooling. The results indicate that ATES combined with glazed ST collectors demonstrates superior heat storage while HP with PV/ST combination and floor heating achieves an average coefficient of performance (COP) of 6.09 for both SH and DHW. In contrast, HP combined with PVTs shows the lowest performance, with a COP of around 5 when used with radiator heating. Additionally, majority of the demand is covered using HP storage mode with seasonal storage and HP while building insulation plays a crucial role.

Positive Energy Districts (PEDs) are integral to achieving sustainable urban development by enhancing energy self-sufficiency and reducing carbon emissions. This paper explores energy balance calculations in four diverse case study districts within different climatic conditions—Fiat Village in Settimo Torinese (Italy), Großschönau (Austria), Beursplain in Amsterdam (Netherlands), and Lunca Pomostului in Reşiţa (Romania)—as part of the SIMPLY Positive project. Each district faces unique challenges, such as outdated infrastructure or heritage protection, which we address through tailored strategies including building renovations and the integration of renewable energy systems. Additionally, we employ advanced simulation methodologies to assess energy performance. Simulation results highlight the significance of innovative technologies like photovoltaic-thermal (PVT) systems, application of demand-side actions, and flexible grid usage. Furthermore, mobility assessments and resident-driven initiatives demonstrate the critical role of community engagement in reducing carbon footprints. This study underscores the adaptability of PED frameworks across varied urban contexts and provides actionable insights for scaling similar strategies globally, supporting net-zero energy targets.

The authors have operated a few minor modifications in response to helpful feedback received post-publication from the readership. These updates are solely intended to clarify certain aspects of the article and enhance its overall readability. The first update concerns the caption of Fig. 7, which has been revised to improve clarity for readers through the addition of explanatory notes. The second update pertains to the Technology Readiness Level (TRL) of a technology developer in Table 3, which has been updated based on the latest provided information. As a derivative of this change, Fig. 8(a), that is a visual representation of Table 3, has also been updated to reflect the revised TRLs. Additionally, the note in the caption of Table 3 has been slightly modified for improved clarity. These modifications do not affect the outcomes, analysis, or conclusions of the article and are solely intended to improve clarity for readers and consistency with respect to most recent information.[Figure presented] Fig. 7: Proposed classification framework. FPV designs compiled and classified based on research publications and designs used by technology providers. Note: (i) each reported archetype can be technically made modular with companies deploying different (proprietary) solutions for upscaling the surface coverage of the farm; (ii) the adjective “large” in the acronym ”LRP” is related to the area of the floater as a surface that is at least bigger than one PV module. Table 3: TRLs of different FPV archetypes hosted by different organisations. Note: This table shows the TRLs based on publicly available information and represents a snapshot in time. The TRLs are subject to change over time and may not reflect the most up-to-date values.[Figure presented][Figure presented] Fig. 8: Current technology readiness landscape. (a) The trend of TRLs for inland and offshore solar deployments, (b) number of organisations working on inland and offshore solar deployment. Data derived from Table 3.

This study investigates the transparent conductive oxides (TCOs) as front contact for thin-film solar cell applications by developing a bilayer design that decouples the optical and electrical functionalities. The bilayer front contact structure combines hydrogenated indium oxide (IOH) and non-intentionally doped zinc oxide (ZnO) materials. This design achieves enhanced optoelectrical properties with a mobility of 120 cm²/Vs and a carrier density of 1.97·10¹⁹ cm^-3. Notably, the bilayer outperforms the expected average of its constituent layers in both transparency and conductivity, reflecting the benefits of optimized layer architecture. When integrated as the front electrode in a hydrogenated nanocrystalline silicon (nc-Si:H) solar cell, the IOH/ZnO bilayer yields a fill factor of 64.56 % and a power conversion efficiency of 7.85 %. When using an ITO front contact, the nc-Si:H solar cell reveals a fill factor of 56.27 % and an efficiency of 6.80 %. By successfully decoupling optical and electrical properties, the optimized IOH/ZnO bilayer offers a significant advancement over single-layer TCO configurations, presenting an innovative pathway for enhanced performance in thin-film solar cell technology.

At standard test conditions (STC), the performance of photovoltaic modules is compared using efficiency. As irradiance and module temperature fluctuate over the year and STC efficiency does not assess the performance of the module accurately in real world conditions, the annual energy yield is used instead as performance metric. Perovskite/silicon tandem solar cells are being massively researched and sought after in PV industry for their efficiency well above 34% with further growth perspective. In this work, to evaluate and compare performance of different perovskite/silicon tandem photovoltaic (PV) modules based on different bottom cell technologies, we use a hybrid modelling approach. Such approach, combining experimentally obtained and simulated current-voltage curves, flexibly predicts the annual energy yield of novel tandem PV modules via our PVMD toolbox and enables their optimization in any location. In particular, considering (i) mono- and bi-facial architectures, (ii) 2-terminal and 4-terminal module configurations, and (iii) silicon heterojunction or novel poly-SiOx passivated c-Si solar bottom cells, we compare the annual energy yield of different perovskite/silicon tandem modules and we optimize their performance in different locations with respect to different perovskite thickness and bandgaps

Increasing the operating lifetime of photovoltaic (PV) modules is a key factor in further reducing their levelized cost of electricity. Analytical degradation models typically use the external relative humidity (RH) as a stress factor, rather than the moisture concentration inside the module. This study presents a Finite Element Method (FEM) model, built in COMSOL Multiphysics, to simulate the moisture ingress inside a PV module. We explore the effects of different encapsulant and backsheet materials, as well as various climatic conditions, on moisture penetration. Overall, the impact of the climate has a larger impact on the moisture ingress than the choice of material, implying that the PV module design should be adjusted for different climates. As FEM simulations are computationally intensive, we also present an analytical model, based on empirically determined characteristics, to simulate the moisture ingress. This reconstruction can be done with a deviation lower than 0.05 for all conditions. Finally, our findings indicate that the relative moisture content (RMC) within the module serves as a more accurate stress factor than outdoor RH. Degradation rates over time found in literature are captured more accurately when deploying RMC.

Bifacial perovskite/silicon solar cells can combine the advantages of tandem technology (high efficiencies) and bifacial modules (additional received irradiance from the rear) to increase the energy yield of photovoltaic (PV) systems further. In literature, it has already been shown that for two-terminal tandems this would require a lower bandgap energy (E_g) for the perovskite cell, as the rear irradiance increases the current in the bottom cell creating a current mismatch, if this is not considered during optimization. This work expands on bifacial two-terminal tandem optimization by considering aspects not included before. Besides the E_g, the thickness (d) of the perovskite is also optimized, as this also affects the current matching. Additionally, this work studies the trends in different energy losses of the PV module to better understand what affects the optimal perovskite cell. Our simulations show that the optimal E_g is 1.61–1.65 eV and the optimal d is 650–750 nm, which agrees with the observations in literature. The optimal E_g and d are mostly a trade-off between mismatch and thermalization losses, meaning that the mismatch losses should not be fully minimized. Additionally, the irradiance from the rear side is converted less efficiently than the front side irradiance due to larger thermalization and reflection losses. Therefore, the energy yield of bifacial tandem modules, compared to monofacial tandem ones, only increases for large ground albedo. Finally, our results show that the bifacial tandems have over a 25% gain in energy yield compared to bifacial single junction modules and up to 5% gain compared to monofacial tandem modules.

Research into the impact of innovative sustainable energy experiments and demonstrations is crucial to diversifying, scaling up, and accelerating the sustainable energy transition. Although there is vast research into sustainable energy experiments and demonstrations, research literature offers a fragmented collection of findings. A coherent overview of themes and insights regarding the transformative impact of innovative sustainable energy experiments and demonstrations on sustainable energy systems from the past, present, and near future is lacking and necessary to increase experiments and demonstrations' impact on the sustainable energy transition. The research in this study fills this knowledge gap by providing such an overview and yields novel insights into the organized function and impact of experiments and demonstrations. It spans a broad spectrum of sustainable energy technologies, the empirical domains where these are invented, developed and applied, and the stakeholders involved. The overview is the outcome of a Delphi study in which the insights of 47 international scientific research experts in sustainable energy experiments and demonstrations are bundled and explained. This study presents a thematic overview of the significant insights regarding past and current sustainable energy experiments and demonstrations and outlines a research agenda for the future. Policymakers, practitioners, and scientists can leverage this to inform their sustainable energy policies, business strategies, and research programs.

In the quest for advancing photovoltaic efficiency, the adoption of multijunction solar cell architectures has emerged as a promising approach. Perovskite/silicon double-junction solar cells have already achieved efficiencies surpassing 33%, exceeding the theoretical efficiency limit for single-junction devices. To enhance efficiency even further, exploring perovskite/perovskite/silicon (PPS) triple-junction solar cells seems a logical next step, as they offer the potential to further reduce thermalization losses and achieve even higher efficiencies. This study delves into the potential of various configurations of PPS modules, exploring different subcell interconnections. Initially, we present an optoelectrical model to simulate the performance of these devices, incorporating both luminescence coupling and cell-to-module losses. This enables us to optimize the bandgap energy of the top and middle perovskite subcells under both standard test conditions (STC) and outdoor conditions. Our analysis reveals that the addition of a perovskite subcell can improve the STC efficiency up to 9%–13%. This gain in STC performance also translates into a similar gain in energy yield, meaning that triple-junction devices produce 8%–14% more electricity than their double-junction reference devices.

Recent conversion efficiency breakthroughs in double-junction (tandem) perovskite/crystalline silicon solar cells demand advanced opto-thermo-electrical simulations, that are critical for translating laboratory results into realistic photovoltaic module and system performance. A holistic framework is here developed and presented, combining cell-level simulations, spectral analysis, PV module and PV system modelling. After validating the deployed physics models against measured cells and modules, hourly spectral irradiances for Delft, the Netherlands, and Catania, Italy, are generated and clustered into representative “blue-rich” and “red-rich” spectra. The effects of spectral variations on the current-matching and energy yield of tandem modules are quantified. Realistic module architectures are simulated, integrating dynamic temperature and spectrum data. Temperature coefficients are derived as a function of both irradiance and module temperature, significantly improving upon traditional indoor-derived values. Results show that standard indoor-derived coefficients under-/overestimate values in realistic conditions, highlighting the ultimate need for location-specific power matrixes. This study offers a robust pathway to predict tandem module energy yields across seasons and climates, supporting optimized design choices for industrial production and future PV installations.

The uncertainty surrounding land availability for renewable energy deployment is a growing concern, creating a strong need for alternative solutions. In recent years, offshore floating photovoltaic (OFPV) systems have shown great promise in meeting global energy demands without competing for land resources. With ambitious targets like 3 GW in The Netherlands by 2030 and global projections exceeding 20 GW, OFPVs are emerging as a key solution at this critical juncture in energy transition. The significance of this technology is also reflected in the 95% increase in research outputs over the past five years. Despite this growth, insights remain scattered, with limited understanding of both the technology and performance. This review fills this gap by providing a comprehensive overview of OFPV systems, addressing both technical and performance aspects. Specifically, the objectives are to: provide detailed information about technology readiness levels, real-world deployments, and a new classification matrix to categorize different OFPV designs; identify key processes like dynamic motion, cooling, optical changes, and long-term degradation that impact energy yield (EY); and quantify the impact of each process on EY based on reported data. The findings reveal that dynamic motion (-0.4% to -15%) and long-term degradation (-2% to -20%) generally reduce EY, while cooling (-4% to +20%) and optical effects (-40% to +5%) can enhance or reduce EY depending on operating conditions. While these insights are crucial, several challenges remain, with the most pressing being the need to standardize measurement and modeling techniques for EY prediction to propel OFPVs towards large-scale commercialization.

Our study focuses on the optimization of front contact design by exploring a novel bilayer configuration that employs transparent conductive oxides (TCOs) to enhance the efficiency of thin-film silicon solar cells. The TCOs investigated include sputtered hydrogenated indium oxide (IOH), cerium-doped indium oxide (ICO), cerium and hydrogen co-doped indium oxide (ICOH), and intrinsic zinc oxide (i-ZnO). We highlight the suitability of these TCOs in a bilayer design, first analyzing their opto-electrical properties as monolayers and subsequently in bilayer configurations. The IOH/i-ZnO bilayer architecture, in particular, demonstrates promising opto-electrical properties on both flat glass and micro-textured glass substrates. IOH/i-ZnO on flat glass substrate demonstrates remarkable mobility (143.44 cm²/Vs) and a carrier concentration in the order of 10¹⁹cm^-3. The mean of reflectance (R) trends consistently exceeds 80%, while the mean of transmittance (T) trends falls below 20% beyond 500 nm. The interference effects within the bilayers are minimized for designs on micro-textured glass, preserving values within a desirable range. These findings represent an innovative approach to front contact design for thin-film silicon solar cells, emphasizing the potential of bilayer configurations to advance solar cell technology.

Two terminal (2T) perovskite/copper-indium-gallium-selenide (CIGS) tandem solar cells combine high conversion efficiency with lightweight flexible substrates which can decrease manufacturing and installation costs. In order to improve the power conversion efficiency of these tandem solar cells, the use of advanced simulation tools is crucial to estimate the loss mechanisms. In this regard, most of the available simulation works on tandem solar cells are oriented to minimize optical losses and assuming simplifications for the electrical simulations in particular in the top and bottom cell interconnection at the so-called tunnel recombination junction (TRJ) neglecting the inner physics of the complete tandem device. Therefore, the effect of charge exchange mechanism between top and bottom soler cells on the external parameters of a tandem devices is not fully understood yet. In this work, we present an experimentally validated opto-electrical model based on the fundamental semiconductor equations for the study of loss mechanisms of a reference perovskite/CIGS solar cell. Different from other numerical works, because our simulation platform includes the fundamental working mechanisms of the layers comprising the TRJ, we can properly calculate the losses related to it. We firstly present the calibration and validation of our opto-electrical model with respect to three fabricated reference solar cells: top cell only, bottom cell only and tandem device. Then, we use the calibrated model to evaluate main loss mechanisms affecting the baseline tandem device. Finally, we use the model to propose a roadmap for the optimization of monolithic perovskite/CIGS tandem solar cells.

This paper presents dynamic air-based models of a hybrid photovoltaic-thermal (PVT) collector. The models are developed with the aim of estimating the temperature of the collector components and therefore of estimating the annual generation of electrical energy and thermal energy outputs, by using actual climate data of six different cities based on Köppen-Geiger-Photovoltaic (KGPV) climate zones. The results show that the unglazed type collector has the best PV cooling while the dual channel collector has the best air heating among air-based PVT collectors. The results also indicate that the use of additional fluid enhances both electrical and thermal performance. The dynamic models are validated by comparison with results found in the literature. The paper also discusses a novel bi-fluid PVT system combined with a storage tank and an H-infinity based robust controller that can handle uncertainties. The results of the bi-fluid system show that the fraction of energy demand covered by the system is highly dependent on climate conditions and the collector's surface area. It was found that for a small-scale house (standard for four people), the proposed system can cover more than 70% annual domestic hot water demand for cities with high solar irradiance and 32% for a city with low solar irradiance.

Silicon heterojunction (SHJ) solar cells have achieved a record efficiency of 26.81% in a front/back-contacted (FBC) configuration. Moreover, thanks to their advantageous high V_OC and good infrared response, SHJ solar cells can be further combined with wide bandgap perovskite cells forming tandem devices to enable efficiencies well above 33%. In this study, we present strategies to realize high-efficiency SHJ solar cells through combined theoretical and experimental studies, starting from the optimization of Si-based thin-film layers to the implementation of electrodes with reduced indium and silver usage. Advanced opto-electrical simulations, which enable comprehensive theoretical understandings of the main physical mechanisms governing carriers’ collection and light management, provide clear pathways for device designs and experimental optimizations. We present the fabricated FBC-SHJ solar cells in both monofacial and bifacial configurations with the best efficiencies of 24.18% and 23.25%, respectively. We point out that to achieve optimum device performance, the compositional materials should be holistically optimized and evaluated as part of the contact stacks with adjacent layers. As an outlook beyond the classical FBC-SHJ solar cell architecture, we propose various novel SHJ-based solar cell architectures. Their potential performance was assessed and compared via rigorous opto-electrical simulations and a maximal efficiency of 27.60% was simulated for FBC-SHJ solar cells featuring localized contacts.

Photovoltaic (PV) technology is raising attention as a low-cost green energy source. It mainly finds applications in solar fields, on building facades and on rooftop. One of the main issues that can occur is the shading of solar cells inside the photovoltaic module which could affect the maximum power output of the PV panel and the lifetime of the cell itself. In order to predict the behaviour of PV panels in partial shading conditions, simulations and then measurements on two different photovoltaic modules have been carried out and compared. Data have shown that the maximum power output of the panels under 1sun illumination can be predicted by simulation with a 3% discrepancy from measured values, independently from the type of technology and interconnections of the PV module.

Monolithic perovskite/c-Si tandem solar cells have attracted enormous research attention and have achieved efficiencies above 30%. This work describes the development of monolithic tandem solar cells based on silicon heterojunction (SHJ) bottom- and perovskite top-cells and highlights light management techniques assisted by optical simulation. We first engineered (i)a-Si:H passivating layers for (100)-oriented flat c-Si surfaces and combined them with various (n)a-Si:H, (n)nc-Si:H, and (n)nc-SiOx:H interfacial layers for SHJ bottom-cells. In a symmetrical configuration, a long minority carrier lifetime of 16.9 ms was achieved when combining (i)a-Si:H bilayers with (n)nc-Si:H (extracted at the minority carrier density of 1015 cm-3). The perovskite sub-cell uses a photostable mixed-halide composition and surface passivation strategies to minimize energetic losses at charge-transport interfaces. This allows tandem efficiencies above 23% (a maximum of 24.6%) to be achieved using all three types of (n)-layers. Observations from experimentally prepared devices and optical simulations indicate that both (n)nc-SiOx:H and (n)nc-Si:H are promising for use in high-efficiency tandem solar cells. This is possible due to minimized reflection at the interfaces between the perovskite and SHJ sub-cells by optimized interference effects, demonstrating the applicability of such light management techniques to various tandem structures.

Transparent conductive oxides (TCOs) are used as front electrode of thin film silicon (TF-Si) solar cells to increase power conversion efficiency. Metal oxides doped with different materials can be deployed as TCO. The preferred TCO is usually selected using a trade-off between transparency and conductivity. This work proposes a bi-layer front contact to address the limitation of this trade-off. IOH and i-ZnO are chosen as the best candidates for such architecture due to their good opto-electrical properties. A thin layer of IOH ensures good lateral conductivity and high transparency in the visible part of the solar spectrum. An additional i-ZnO layer provides minimized parasitic absorption losses along with low transverse resistivity. The best opto-electrical properties are achieved when deposition temperature and power density are set at 25°C and 1.5 W/cm², 200°C and 2 W/cm² for IOH and i-ZnO respectively.

The photovoltaic (PV) module energy rating standard series IEC 61853 does not cover bifacial PV modules. However, the market share of bifacial PV modules has dramatically increased in recent years and is projected to grow. This work demonstrates how Parts 3 and 4 of the IEC 61853 standard could be extended to bifacial modules. First, we develop an irradiance model that uses the data already given in the standard IEC 61853-4 to calculate the irradiance on the rear side of the module. Second, we propose a way to extend the energy yield calculation algorithm IEC 61853-3 to include bifacial modules and make it available to the PV community. This rear irradiance and bifacial energy yield calculation procedure is tested using real outdoor measurements for a nine-month period with a root mean square difference between measured and simulated energy yield of 4.65%. To conclude, we investigate the impact of different climates and normalization on the bifacial module energy rating results.

The tandem PV technology can potentially increase the efficiency of PV modules over 30%. To design efficient modules, a quantification of the different losses is important. Herein, a model for quantifying the energy loss mechanisms in PV systems under real-world operating conditions with a level of detail back to the components and their fundamental properties is presented. Totally, 17 losses are defined and divided into four categories (fundamental, optical, electrical, and system losses). As example, a system based on a > 29% two-terminal perovskite/silicon tandem cell is considered. The loss distribution at standard test conditions is compared to four geographical locations. The results show that the thermalization, reflection, and inverter losses increase by 1.2%, 1.1%, and 1.4%, respectively, when operating outdoors. Additionally, it is quantified how fill factor gains partly compensate the current mismatch losses. For example, a mismatch of 7.0% in photocurrent leads to a power mismatch of 1.2%. Therefore, the power mismatch should be used as indicator for mismatch losses instead of a current mismatch. Finally, herein, it is shown that solar tracking increases not only the in-plane irradiance but also the efficiency of the tandem module.