Quantum networks connecting quantum processing nodes via photonic links enable distributed and modular quantum computation. In this framework, quantum gates between remote qubits can be realized using quantum teleportation protocols. The essential requirements for such non-local gates are remote entanglement, local quantum logic within each processor, and classical communication between nodes to perform operations based on measurement outcomes. Here, we demonstrate an unconditional Controlled-NOT quantum gate between remote diamond-based qubit devices. The control and target qubits are Carbon-13 nuclear spins, while NV electron spins enable local logic, readout, and remote entanglement generation. We benchmark the system by creating a Greenberger-Horne-Zeilinger state, showing genuine 4-partite entanglement shared between nodes. Using deterministic logic, single-shot readout, and real-time feed-forward, we implement non-local gates without post-selection. These results demonstrate a key capability for solid-state quantum networks, enabling exploration of distributed quantum computing and testing of complex network protocols on full-stack systems.

Solid-state quantum registers consisting of optically active electron spins with nearby nuclear spins are promising building blocks for future quantum technologies. For electron spin-1 registers, dynamical decoupling (DD) quantum gates have been developed that enable the precise control of multiple nuclear spin qubits. However, for the important class of electron spin-1/2 systems, this control method suffers from intrinsic selectivity limitations, resulting in reduced nuclear spin gate fidelities. Here, we demonstrate improved control of single nuclear spins by an electron spin-1/2 using dynamically decoupled radio-frequency (DDRF) gates. We make use of the electron spin-1/2 of a diamond tin-vacancy center, showing high-fidelity single-qubit gates, single-shot readout, and spin coherence beyond a millisecond. The DD control is used as a benchmark to observe and control a single 31C nuclear spin. Using the DDRF control method, we demonstrate improved control on that spin. In addition, we find and control an additional nuclear spin that is insensitive to the DD control method. Using these DDRF gates, we show entanglement between the electron and the nuclear spin with 72(3)% state fidelity. Our extensive simulations indicate that DDRF gate fidelities well in excess are feasible. Finally, we employ time-resolved photon detection during readout to quantify the hyperfine coupling for the electron's optically excited state. Our work provides key insights into the challenges and opportunities for nuclear spin control in electron spin-1/2 systems, opening the door to multiqubit experiments on these promising qubit platforms.

Micrometer-scale thin diamond devices are key components for various quantum sensing and networking experiments, including the integration of color centers into optical microcavities. In this work, we introduce a laser-cutting method for patterning microdevices from millimeter-sized diamond membranes. The method can be used to fabricate devices with micrometer thicknesses and edge lengths of typically 10-100 µm. We compare this method with an established nanofabrication process based on electron-beam lithography, a two-step transfer pattern utilizing a silicon nitride hard mask material, and reactive ion etching. Microdevices fabricated using both methods are bonded to a cavity Bragg mirror and characterized using scanning cavity microscopy. We record two-dimensional cavity finesse maps over the devices, revealing insights about the variation in diamond thickness, surface quality, and strain. The scans demonstrate that devices fabricated by laser-cutting exhibit similar properties to devices obtained by the conventional method. Finally, we show that the devices host optically coherent Tin- and Nitrogen-Vacancy centers suitable for applications in quantum networking.

We demonstrate large-range tuning of the optical transition of Tin-Vacancies (SnV) in diamond using electro-mechanical-induced strain, realizing >40 GHz tuning. We employ real-time feedback on the strain environment to stabilize the resonant frequency.

An efficient interface between a spin qubit and single photons is a key enabling system for quantum science and technology. We report on a coherently controlled diamond nitrogen-vacancy center electron spin qubit that is optically interfaced with an open microcavity. Through Purcell enhancement and an asymmetric cavity design, we achieve efficient collection of resonant photons, while on-chip microwave lines allow for spin qubit control at a 10 MHz Rabi frequency. With the microcavity tuned to resonance with the nitrogen-vacancy center’s optical transition, we use excited state lifetime measurements to determine a Purcell factor of 7.3 ± 1.6. Upon pulsed resonant excitation, we find a coherent photon detection probability of 0.5% per pulse. Although this result is limited by the finite excitation probability, it already presents an order of magnitude improvement over the solid immersion lens devices used in previous quantum network demonstrations. Furthermore, we use resonant optical pulses to initialize and read out the electron spin. By combining the efficient interface with spin qubit control, we generate two-qubit and three-qubit spin-photon states and measure heralded Z-basis correlations between the photonic time-bin qubits and the spin qubit.

The negatively charged tin-vacancy (SnV⁻) center in diamond has emerged as a promising platform for quantum computing and quantum networks. To connect SnV⁻ qubits in large networks, in situ tuning and stabilization of their optical transitions are essential to overcome static and dynamic frequency offsets induced by the local environment. Here, we report on the large-range optical frequency tuning of diamond SnV⁻ centers using micro-electro-mechanically mediated strain control in photonic integrated waveguide devices. We realize a tuning range of >40 GHz, covering a major part of the inhomogeneous distribution. In addition, we employ real-time feedback on the strain environment to stabilize the resonance frequency and mitigate spectral wandering. These results provide a path for on-chip scaling of diamond SnV-based quantum networks.

Quantum networks are based on shared remote entanglement between local nodes by exchanging indistinguishable photons. We show Two-Photon Quantum Interference between tin-vacancy centers in diamond-waveguides and report on the progress towards remote entanglement generation.

Diamond photonic crystal cavity parameters are measured at cryogenic temperatures. In-situ resonance frequency tuning through gas desorption allows us to probe the SnV-cavity system.

Quantum technologies have made impressive progress over the past decade. In some areas, such as quantum sensing and key distribution, these technologies are moving from the laboratory to enable real-world applications. However, for areas such as quantum computing, entanglement-enhanced sensing, and a global quantum internet, we are in an equivalent of the early transistor age, and hardware breakthroughs are required in multiple arenas to reach the performance necessary for the envisioned applications. In this Review, we assess the current state of the art of quantum information hardware and identify key challenges and opportunities ahead. We draw inspiration from the history of scaling and development of classical electronics and photonics to anticipate progress in the field.

We show diamond Tin-Vacancy centers, coherently-coupled to a tunable microcavity. The exceptional optical properties of this emitter in combination with a stable, high quality cavity enables a cavity transmission signal modulated by a single emitter.

We demonstrate coherent coupling of a single diamond Tin-Vacancy center to a fiber-based microcavity, showing a cavity transmission dip of 50 % on resonance, and altered photon statistics in cavity transmission.

Color centers integrated with nanophotonic devices have emerged as a compelling platform for quantum science and technology. Here, we integrate tin-vacancy centers in a diamond waveguide and investigate the interaction with light at the single-photon level in both reflection and transmission. We observe single-emitter-induced extinction of the transmitted light up to 25% and measure the nonlinear effect on the photon statistics. Furthermore, we demonstrate fully tunable interference between the reflected single-photon field and laser light backscattered at the fiber end and show the corresponding controlled change between bunched and antibunched photon statistics in the reflected field.

The generation of entanglement between distant quantum systems is at the core of quantum networking. In recent years, numerous theoretical protocols for remote-entanglement generation have been proposed, many of which have been experimentally realized. Here, we provide a modular theoretical framework to elucidate the general mechanisms of photon-mediated entanglement generation between single spins in atomic or solid-state systems. Our framework categorizes existing protocols at various levels of abstraction and allows for combining the elements of different schemes in new ways. These abstraction layers make it possible to readily compare protocols for different quantum hardware. To enable the practical evaluation of protocols tailored to specific experimental parameters, we have devised numerical simulations based on the framework with our codes available online.