Quantum computers (QC) promise to solve certain computational problems exponentially faster than a classical computer due to the superposition and entanglement properties of quantum bits (qubits). Among several qubit technologies, spin qubits are a promising candidate for large-scale QC, since (1) they have a small footprint allowing them to be densely integrated and (2) they can operate at relatively high temperatures (\gt1\mathrm{K}) [1], potentially reducing system cost and complexity.

@en

We present a wireline transmitter (TX) for re-configurable chip-to-chip links. The proposed design features a frequency-adaptive clock chain, a fast 16:1 clocked-CMOS multiplexer (C²MOS MUX) tree, and a full-rate synchronous current-mode logic (CML) clock driver. A prototype realized in 40-nm CMOS accomplishes a wide 0.1-to-11 Gb/s operation range (fmax/fmin = 110×). At 11 Gb/s, the prototype achieves 3.98 pJ/bit for a bit error rate (BER) < 10^-12 with a 60.9-ps eye width.@en

Recently, digital transmitters (DTXs) that feature arrays of controlled digital PA (DPA) cells have become increasingly popular since they directly benefit from nanoscale CMOS technology, yielding reduced die area and highly efficient operation [1] -[6]. For wideband applications, I/Q DTXs are considered superior over their polar counterparts due to their linear I/Q operation, which avoids bandwidth expansion. Nevertheless, I/Q DTXs can suffer from the interaction between their I and Q paths, especially at higher power levels, giving rise to an I/Q image and nonlinearity. To tackle this issue, an IQ interleaved upconverter has been introduced [1]. However, its 25%-LO requirement restricts the operational frequency to below 5GHz. The diamond-shaped mapping technique, presented in [2], uses 50% LOs and a different I and Q combining method but suffers from nonlinearity due to a clipping operation. Besides, the large peak-to-average power ratio (PAPR) in modern wireless standards requires the DTX to operate in deep power back-off (DPBO), degrading its average efficiency. To target applications requiring large modulation bandwidth, high spectral purity and average efficiency, we present a DTX with a signed IQ interleaved upconversion approach based on 50%-LO clock distribution, which enables close to perfect orthogonal I/Q summation. To enhance its average efficiency, a compact, 4-way Doherty DPA architecture is introduced.

@en

This paper presents the characterization and modeling of microwave passive components in TSMC 40-nm bulk CMOS, including metal-oxide-metal (MoM) capacitors, transformers, and resonators, at deep cryogenic temperatures (4.2 K). To extract the parameters of the passive components, the pad parasitics were de-embedded from the test structures using an open fixture. The variations in capacitance, inductance and quality factor are explained in relation to the temperature dependence of the physical parameters, and the resulting insights on the modeling of passives at cryogenic temperatures are provided. Modeling the characteristics of on-chip passive components, presented for the first time down to 4.2 K, is essential in designing cryogenic CMOS radio-frequency integrated circuits, a promising candidate to build the electronic interface for scalable quantum computers.@en

We propose a phase-insensitive parametric amplifier featuring image cancelation and a doubly tuned transformer to enhance its bandwidth. Exploiting the reduced loss of passive components at cryogenic temperatures, the experimental characterization of a prototype shows a power gain of 9 dB with a bandwidth of 1.85 GHz for a pump frequency of 15.6 GHz and an image rejection of ~24 dB at 8.5 K. The amplifier consumes 33 mW in total at 8.5 K.@en

Accurate and low-noise generation and amplification of microwave signals are required for the manipulation and readout of quantum bits (qubits). A fault-tolerant quantum computer operates at deep cryogenic temperatures (i.e., <100 mK) and requires thousands of qubits for running practical quantum algorithms. Consequently, CMOS radio-frequency (RF) integrated circuits operating at cryogenic temperatures down to 4 K (Cryo-CMOS) offer a higher level of system integration and scalability for future quantum computers. In this paper, we extensively discuss the role, benefits, and constraints of Cryo-CMOS for qubits control and readout. The main characteristics of the CMOS transistors and their impacts on RF circuit designs are described. Furthermore, opportunities and challenges of low noise RF signal generation and amplification are investigated.

@en

A fully integrated RFDAC based phase modulator in 40nm bulk CMOS is presented. To boost in-band linearity and the frequency range of operation, a harmonic rejection RFDAC architecture that suppresses the 3rd and 5th harmonics is proposed. The achieved frequency agility of the phase modulator is verified over a 0.6-2.5GHz range yielding EVM of -34.5dB and -36dB for an 18Mb/s and 75Mb/s GMSK signals, respectively. The power consumption of the proposed phase modulator is 33 mW at 2.4GHz.@en

This paper presents a wideband linear direct-digital RF modulator (DDRM) in 40-nm CMOS technology. An innovative I/ Q-interleaving RF digital-to-analog converter (DAC) is proposed to enable the combination of in-phase (I) and quadrature (Q) signals in a more digital fashion, thereby improving the linearity performance at large bandwidths. The DDRM also features an advanced second-order hold digital interpolation filter to suppress the sampling spectral replicas in the presence of large bandwidth signals. Moreover, the harmonic rejection technique in the context of RF DAC operation is adopted and implemented. The 2 × 9-bit DDRM core occupies 0.21 mm 2 and consumes 110 and 146 mW at 1 and 3 GHz, respectively, with the peak power of +9.2 dBm. The error vector magnitude (EVM) and adjacent channel power ratio (ACPR) at 3 GHz for a 57-MHz 64-QAM signal are better than -30 and -45 dB, respectively, and ACPR remains as low as -44 dBc up to a wide bandwidth of 113 MHz.@en

This paper presents an advanced 2.3-2.8 GHz fully-integrated digital-intensive polar Doherty transmitter realized in 40nm standard CMOS. The proposed architecture comprises CORDIC, digital delay aligners, interpolators, digital pre-distortion (DPD) circuitry in combination with frequency-agile wideband phase modulators followed by the digital main and peak power amplifier (PA) operating in quasi-load insensitive class-E using an on-chip power combiner. At 2.5 GHz, its maximum output power is +21.4 dBm. Drain efficiency is 49.4% at peak power, and 33.7% at 6-dB power back-off. Applying DPD for a 20-MHz 64-QAM signal, the measured EVM is better than -30 dB while the average drain efficiency is 24%.@en

Quantum computers could efficiently solve problems that are intractable by today's computers, thus offering the possibility to radically change entire industries and revolutionize our lives. A quantum computer comprises a quantum processor operating at cryogenic temperature and an electronic interface for its control, which is currently implemented at room temperature for the few qubits available today. However, this approach becomes impractical as the number of qubits grows towards the tens of thousands required for complex quantum algorithms with practical applications. We propose an electronic interface for sensing and controlling qubits operating at cryogenic temperature implemented in standard CMOS.

@en

To fully benefit from the progress of CMOS technologies, it is desirable to completely digitize the TX, replacing its final stage with a digitally controlled PA (DPA). The DPA consists of arrays of small sub-PAs that are digitally controlled to modulate the output amplitude, thus operating as an RF-DAC [1-6]. DPAs are normally designed in a switched mode (Classes E/D/D-1, etc.) to achieve high efficiency while using high sampling rate to attenuate and push the spectral images to higher frequencies. However, they suffer from high nonlinearity in their AM-code-word (ACW) to AM and ACW-to-PM conversion. To correct for such nonlinearities, digital pre-distortion (DPD) of the input signal is often used [1-3], typically implemented by look-up tables (LUT). Unfortunately, DPD approaches suffer from large signal-BW expansion due to their inherently nonlinear characteristics. This, combined with the already present BW regrowth in a polar TX in the AM and PM paths, yields significant hardware-speed/power constraints when the signal BW becomes large. For a Cartesian TX, the use of LUT-DPD is even more complicated since a full 2D LUT is typically required [2]. To relax the overall system complexity, it is highly desirable to have a PA with a maximum inherent linearity without compromising its power or efficiency. In this work, an ACW-AM correction based on nonlinear sizing along with controlling the peak voltage of RF clocks (overdrive voltage tuning) and a ACW-PM correction based on multiphase RF clocking are introduced to linearize the characteristic curves of a Class-E polar DPA with intent to avoid any kind of pre-distortion.@en